,
Europska mreža trgovaca dioničarskim strojevima
+ 49 (0) 2389 5299080
Usluga pretraživanja Prodaja rabljenih strojeva

Bitte einen Suchbegriff eingeben - Unesite pojam za pretraživanje
Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:
             Pregled: 
          1. machine-categorie:

          Machines available immediately

          Machinelist: Machines available immediately

          double-sided high speed press

          used Machines available immediately double-sided high speed press KAISER KSTU 630

          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland
          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233037 · double-sided high speed press

          KAISER - KSTU 630 - - 1993 - Siemens S5

          Technical details
          pressure 63 t︱stroke 10 - 80 mm︱no. of strokes 75 - 400 /min︱distance between columns 1080 / 920 mm︱dayligth (stroke and adjustment up) 450 mm︱column travel -side 300 mm︱table surface area 1000 x 550 mm︱hole in the table 700 x 160 mm︱table height over floor 1080 mm︱ram surface 900 x 450 mm︱ram adjustment 80 mm︱material width 250 mm︱material thickness 0,3 - 3,0 mm︱material cross-cut 750 mm²︱feed length 1,0 – 9999,9 mm︱power requirement 11,0 kW︱Weight 9,5 t︱dimensions of the machine ca. 2,8 x 2,7 x 3,1 mxmxm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch/brake combination (make Ortlinghaus), manual stroke adjustment, motoric ram adjustment, motoric circular oil lubrication, pneumatic counterbalance in ram electronic servo-roll feed Kaiser KWV 250
            pressure 63 t
            stroke 10 - 80 mm
            no. of strokes 75 - 400 /min
            distance between columns 1080 / 920 mm
            dayligth (stroke and adjustment . 450 mm
            column travel -side 300 mm
            table surface area 1000 x 550 mm
            hole in the table 700 x 160 mm
            table height over floor 1080 mm
            ram surface 900 x 450 mm
            ram adjustment 80 mm
            material width 250 mm
            material thickness 0,3 - 3,0 mm
            material cross-cut 750 mm²
            feed length 1,0 – 9999,9 mm
            power requirement 11,0 kW
            Weight 9,5 t
            dimensions of the machine ca. 2,8 x 2,7 x 3,1 mxmxm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive (PIV), pneumatic clutch/brake combination (make Ortlinghaus), manual stroke adjustment, motoric ram adjustment, motoric circular oil lubrication, pneumatic counterbalance in ram
            electronic servo-roll feed Kaiser KWV 250


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Machines available immediately double-sided high speed press KAISER V63w

          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland
          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15430 · double-sided high speed press

          KAISER - V63w - - 1993 -

          Technical details
          pressure 63 t︱stroke 10-80 mm︱no. of strokes 65-400 Hub/min︱ram - range of adjustment 80 mm︱table surface area 1030x550 mm︱ram surface 920x450 mm︱hole in the table 700x200 mm︱ 420 mm︱weight of the machine ca. 10 t︱
            pressure 63 t
            stroke 10-80 mm
            no. of strokes 65-400 Hub/min
            ram - range of adjustment 80 mm
            table surface area 1030x550 mm
            ram surface 920x450 mm
            hole in the table 700x200 mm
            420 mm
            weight of the machine ca. 10 t


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

          • Datasheet
          Request / Contact
          used Machines available immediately double-sided high speed press KAISER V 40 WHS

          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland
          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0082 · double-sided high speed press

          KAISER - V 40 WHS - - 1985 -

          Technical details
          Press capacity 40 t︱Slide adjustment 50 mm︱Shut height (stroke down, adjustment up) 310 mm︱Free frontal opening L-R 820 mm︱Table surface area 810 x 450 mm︱Hole in table 600 x 110 mm︱Number of strokes 100 - 1.000 min-1︱Weight of machine approx. 6,8 t︱
            Press capacity 40 t
            Slide adjustment 50 mm
            Shut height (stroke down, adjust. 310 mm
            Free frontal opening L-R 820 mm
            Table surface area 810 x 450 mm
            Hole in table 600 x 110 mm
            Number of strokes 100 - 1.000 min-1
            Weight of machine approx. 6,8 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

          • Datasheet
          Request / Contact

          Eccentric Press - Single Column

          used Machines available immediately Eccentric Press - Single Column KAISER PO 75 Z

          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland
          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-865 · Eccentric Press - Single Column

          KAISER - PO 75 Z - - 1979 -

          Technical details
          pressure 75 t︱throat 260 mm︱stroke 16-80 mm︱table surface area 800 x 520 mm︱distance table/ram 350 mm︱strokes - infinitely variable 50 - 250 Hub/min︱ram surface 400 x 300 mm︱ram adjustment 70 mm︱total power requirement 7,5 kW︱dimensions of the machine ca. 2,7 x 1,7 x 2,6 m︱weight of the machine ca. 4 t︱hole in the table 260 x 180 mm︱
          - pneumatic Ortlinghaus air clutch with additional brake - Infinitely variable speed control using a Stöhrer drive - break plate - 2 hand control - additional clamping plate - Air storage tank for clutch - Circulating oil lubrication
            pressure 75 t
            throat 260 mm
            stroke 16-80 mm
            table surface area 800 x 520 mm
            distance table/ram 350 mm
            strokes - infinitely variable 50 - 250 Hub/min
            ram surface 400 x 300 mm
            ram adjustment 70 mm
            total power requirement 7,5 kW
            dimensions of the machine ca. 2,7 x 1,7 x 2,6 m
            weight of the machine ca. 4 t
            hole in the table 260 x 180 mm
            Description :
            - pneumatic Ortlinghaus air clutch with additional brake
            - Infinitely variable speed control using a Stöhrer drive
            - break plate
            - 2 hand control
            - additional clamping plate
            - Air storage tank for clutch
            - Circulating oil lubrication


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

          • Datasheet
          Request / Contact

          Automatic Punching Press - Double Column

          used Machines available immediately Automatic Punching Press - Double Column KAISER PV 25 F

          • MW-MACHINES
          • Dorf 9
          • 4133 Hofkirchen
          • Österreich
          • +43 (0)66718068977
            -
          • info@machines-mw.at
            machines-mw.at
          #2077-50003 · Automatic Punching Press - Double Column

          KAISER - PV 25 F - - 1973 -

          Technical details
          pressure 25 t︱no. of strokes 120 - 600 Hub/min︱sheet width / mm︱table surface area 360 x 400 mm︱ram adjustment 50 mm︱stroke 6 - 50 mm︱distance table - lower edge of ram 300 mm︱dimension of ram 250 x 250 mm︱total power requirement 4 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 1,6 x 1,1 x 2,3 m︱
          Safety device electro-pneumatic single disc clutch
            pressure 25 t
            no. of strokes 120 - 600 Hub/min
            sheet width / mm
            table surface area 360 x 400 mm
            ram adjustment 50 mm
            stroke 6 - 50 mm
            distance table - lower edge of r. 300 mm
            dimension of ram 250 x 250 mm
            total power requirement 4 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 1,6 x 1,1 x 2,3 m
            Description :
            Safety device electro-pneumatic single disc clutch


        • MW-MACHINES
        • Dorf 9
        • 4133 Hofkirchen
        • Österreich

          • Datasheet
          Request / Contact

          Milling and turning tools

          used Machines available immediately Milling and turning tools KAISER Zweischneider Ausdrehkopf

          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland
          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-M1534 · Milling and turning tools

          KAISER - Zweischneider Ausdrehkopf - - unbekannt -

          Technical details
          / ︱
            /


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

          • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   
            •
          TOP Manufacturer:

          Sažet pregled
          softver
          Sadržaj rabljenih strojeva
          Privatnost
          Pratite nas
          © 2000 - 2024, Logotech oHG · Softverske i internetske usluge - Sva prava pridržana