,

Bitte einen Suchbegriff eingeben - Unesite pojam za pretraživanje
Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:

          Presses

          Machinelist: Presses


          Eccentric Press - Single Column

          used Presses Eccentric Press - Single Column MUELLER AMP 60


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12313 · Eccentric Press - Single Column

          MUELLER - AMP 60 - - 1965 -

          Technical details
          pressure 60 t︱throat 280 mm︱stroke 140 mm︱table-size 750 x 520 mm︱Strole of rum/minute 100 ︱ram adjustable 55 mm︱stroke adjustable from - to 10 - 140 mm︱mould space 340 mm︱hole in the table 230 x 175 mm︱table adjustable 220 mm︱tool hole in ram 40 mm︱total power requirement 2,95 kW︱weight of the machine ca. 2,8 t︱dimensions of the machine ca. 1,5 x 1,2 x 2,4 m︱Electric 380 Volt ︱Foot switch ︱adjustable table ︱Condition: ready for operation ︱Video(s) available on our website.
          Single column eccentric press with rotary wedge coupling, adjustable table, stroke + ram and flywheel drive. Approved only for safe tools and solid ones shields! Last test according to the test report July 2022: Everything is OK. Machine dealer with own stock of 1600 m².
            pressure 60 t
            throat 280 mm
            stroke 140 mm
            table-size 750 x 520 mm
            Strole of rum/minute 100
            ram adjustable 55 mm
            stroke adjustable from - to 10 - 140 mm
            mould space 340 mm
            hole in the table 230 x 175 mm
            table adjustable 220 mm
            tool hole in ram 40 mm
            total power requirement 2,95 kW
            weight of the machine ca. 2,8 t
            dimensions of the machine ca. 1,5 x 1,2 x 2,4 m
            Description :
            Single column eccentric press with rotary wedge coupling, adjustable table,
            stroke + ram and flywheel drive. Approved only for safe tools and solid ones
            shields!
            Last test according to the test report July 2022: Everything is OK.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact

          Hand-Operated Fly Press

          used Presses Hand-Operated Fly Press Fabr. UNBEKANNT BP 6


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11213 · Hand-Operated Fly Press

          Fabr. UNBEKANNT - BP 6 - - unbekannt -

          Technical details
          pressure 6 t︱dayligth 180 mm︱spindle diameter 32 mm︱throat 115 mm︱ram stroke 90 mm︱table surface area 300x270 mm︱weight of the machine ca. 70 kg︱dimensions of the machine ca. 800 x 1350 mm︱
          Machine dealer with own stock of 1600 m².
            pressure 6 t
            dayligth 180 mm
            spindle diameter 32 mm
            throat 115 mm
            ram stroke 90 mm
            table surface area 300x270 mm
            weight of the machine ca. 70 kg
            dimensions of the machine ca. 800 x 1350 mm
            Description :
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • 370 €
          Datasheet
          Request / Contact
          used Presses Hand-Operated Fly Press Eigenbau HP


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11924 · Hand-Operated Fly Press

          Eigenbau - HP - - -

          Technical details
          pressure 10 t︱distance between columns 425 mm︱dayligth 380 mm︱spindle diameter 50 mm︱weight of the machine ca. 200 kg︱dimensions of the machine ca. 1,3 x 0,8 x 2 m︱
          Machine dealer with own stock of 1600 m².
            pressure 10 t
            distance between columns 425 mm
            dayligth 380 mm
            spindle diameter 50 mm
            weight of the machine ca. 200 kg
            dimensions of the machine ca. 1,3 x 0,8 x 2 m
            Description :
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact

          Single Column Press - Hydraulic

          used Presses Single Column Press - Hydraulic OMERA OPI-25C


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12318 · Single Column Press - Hydraulic

          OMERA - OPI-25C - - 2001 -

          Technical details
          pressure 25 t︱throat 300 mm︱stroke 400 mm︱Number of working hours 1235 h︱table-size 650 x 500 mm︱ram surface 550 x 450 mm︱dayligth 700 mm︱rapid traverse - down 500 mm/sec︱work speed 27 - 72 mm/sec︱rapid traverse - up 410 mm/sec︱quantity of oil 230 l︱die cushion capacity 125 kN︱die cushion stroke 200 mm︱capacity of ejector 8 kN︱ejector stroke 150 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3,3 t︱dimensions of the machine ca. 1,3 x 1,6 x 2,8 m︱Electric 400 Volt ︱Light barrier in front
          Little used (only 1235 hours!) hydraulic single column press, power 25 t with Pilz safety control, ejector, light barrier and 2-manual operation. Upgrade with a current Pilz safety controller Mod. PNOZMulti m2pin in 2017. There is a small one in the piston rod of the cylinder Ejector cylinder integrated, which is controlled single-acting. The return stroke of the ejector takes place without force due to thesubsequent stroke of the Press cylinder. Machine intended for optionally retrofittable die cushion. Machine free due to production change. It comes from a large company and has been constantly maintained and kept up to date. Machine dealer with own stock of 1600 m²
            pressure 25 t
            throat 300 mm
            stroke 400 mm
            Number of working hours 1235 h
            table-size 650 x 500 mm
            ram surface 550 x 450 mm
            dayligth 700 mm
            rapid traverse - down 500 mm/sec
            work speed 27 - 72 mm/sec
            rapid traverse - up 410 mm/sec
            quantity of oil 230 l
            die cushion capacity 125 kN
            die cushion stroke 200 mm
            capacity of ejector 8 kN
            ejector stroke 150 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3,3 t
            dimensions of the machine ca. 1,3 x 1,6 x 2,8 m
            Description :
            Little used (only 1235 hours!) hydraulic single column press, power 25 t with
            Pilz safety control, ejector, light barrier and 2-manual operation.
            Upgrade with a current Pilz safety controller Mod. PNOZMulti m2pin in 2017.
            There is a small one in the piston rod of the cylinder Ejector cylinder
            integrated, which is controlled single-acting. The return stroke of the
            ejector takes place without force due to thesubsequent stroke of the
            Press cylinder. Machine intended for optionally retrofittable die cushion.
            Machine free due to production change. It comes from a large company and has
            been constantly maintained and kept up to date.
            Machine dealer with own stock of 1600 m²



        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Single Column Press - Hydraulic BECKER & VAN HUELLEN OK 10/224


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11156 · Single Column Press - Hydraulic

          BECKER & VAN HUELLEN - OK 10/224 - - 1964 -

          Technical details
          pressure 10 t︱throat 235 mm︱stroke ca. 400 mm︱stroke speed - idle stroke downwards 4,5 m/min︱stroke speed - idle stroke upwards 10 m/min︱dayligth ca. 500/600 mm︱table-size ca. 450 x 400 mm︱ram hole 32 mm︱total power requirement 2,2 kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 0,95 x 0,45 x 2,1 m︱Electric 380 Volt ︱With elect. two-hand control through ︱separate console ︱Condition: ready for operation ︱Condition: geometric overhauled ︱Video available on our website.
          Hydraulic single-column press - from a training workshop, no guarantee on UVV, with two-hand control via separate control panel. Work only with safe tools or solid shields! Machine only works in full stroke, the stroke limiter of the ram cannot be regulated because the adjustment chain needs to be repaired, so it is sold at a special price. Machine dealer with own stock of 1600 m².
            pressure 10 t
            throat 235 mm
            stroke ca. 400 mm
            stroke speed - idle stroke downw. 4,5 m/min
            stroke speed - idle stroke upwar. 10 m/min
            dayligth ca. 500/600 mm
            table-size ca. 450 x 400 mm
            ram hole 32 mm
            total power requirement 2,2 kW
            weight of the machine ca. 1,5 t
            dimensions of the machine ca. 0,95 x 0,45 x 2,1 m
            Description :
            Hydraulic single-column press - from a training workshop, no guarantee on UVV,
            with two-hand control via separate control panel.
            Work only with safe tools or solid shields! Machine only works in full stroke,
            the stroke limiter of the ram cannot be regulated because the adjustment chain
            needs to be repaired, so it is sold at a special price.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find the perfect presses for your needs at LagerMaschinen
          Presses are multi-function tools for home or business

          The umbrella term press encompasses a wide range of different machines with an enormous array of functions. Presses can be used for the shaping, cutting, and punching of a variety of different materials. Whether youre in the market for a small manually-operated press for your home workshop or a massive industrial press for your business, you can easily find the most suitable machine for your specifications quickly and easily using LagerMaschinens online marketplace of used machines.

          Find the right used machines for you at LagerMaschinen

          From the publishing industry to the automotive sector, presses play a crucial role in the forming and finishing of products. Presses can be used to shape heavy material, imprint papers and plastic or cut and form metal, such as in coin production. For control and precision, look for used manually-operated presses. For mass-production, CNC operated presses offer quality and efficiency. No matter what your needs are, you can find used presses and more at LagerMaschinen.

          Investing in used machines is a business-savvy plan

          Buying used machines is a practical solution to the budgetary woes of buying equipment for your home or business. When you invest in used machines you get the quality you demand as a price you can afford. The machine marketplace offered by LagerMaschinen is a user-friendly forum for buying and selling used machines. Presses, lathes, grinders and more can be searched for and filtered by location, price or brand, ensuring a hassle-free shopping process from the comfort of your home or office.