,

Bitte einen Suchbegriff eingeben - Unesite pojam za pretraživanje
Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:

          Chip and dust extracting systems

          Machinelist: Chip and dust extracting systems


          Clean air extraction system

          used Chip and dust extracting systems Clean air extraction system HOECKER Vakumobil VT200L


          • Rauscher & Reyhing GmbH
          • Meidelstetter Str. 13
          • 72531 Hohenstein
          • Deutschland

          • (0049)7387 988414
            (0049)7387 988429
          • wolfgang.rauscher@rauscher-reyhing.de
            www.rauscher-reyhing.de
          #1314-38924 · Clean air extraction system

          HOECKER - Vakumobil VT200L - - 2017 -

          Technical details
          4 KW︱volume capacity 2.260 m3/h︱filter surface 12 qm︱low pressure 2.900 Pa200 mm︱
            4 KW
            volume capacity 2.260 m3/h
            filter surface 12 qm
            low pressure 2.900 Pa
            200 mm


        • Rauscher & Reyhing GmbH
        • Meidelstetter Str. 13
        • 72531 Hohenstein
        • Deutschland

        • Datasheet
          Request / Contact

          Deduster

          used Chip and dust extracting systems Deduster NESTRO NE 160 plus


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5935 · Deduster

          NESTRO - NE 160 plus - - neu -

          Technical details
          160 mm︱ 1447 m³/h︱ 2450 pa︱Filter capacity 9,5 m²︱Motor output 2,2 kW︱
            160 mm
            1447 m³/h
            2450 pa
            Filter capacity 9,5 m²
            Motor output 2,2 kW


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Chip and dust extracting systems Deduster NESTRO NE 300 W


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5674 · Deduster

          NESTRO - NE 300 W - - neu -

          Technical details
          300 mm︱ 6000 m³/h︱ 2400 pa︱Filter capacity 31,6 m²︱Motor output 7,5 kW︱
            300 mm
            6000 m³/h
            2400 pa
            Filter capacity 31,6 m²
            Motor output 7,5 kW


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Chip and dust extracting systems Deduster MUNSTER RAF 140/700


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-01895 · Deduster

          MUNSTER - RAF 140/700 - - -

          Technical details
          300 mm︱ 500 m³/h︱ pa︱Filter capacity m²︱
            300 mm
            500 m³/h


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact

          Exhausting system

          used Chip and dust extracting systems Exhausting system KEMPER 8310000006


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-B1149 · Exhausting system

          KEMPER - 8310000006 - - 2015 -

          Technical details
          Dimensions (L/W/H) 700x655x1400 mm︱Filter capacity / m²︱Number of filters 1 St.︱Number of dust containers 1 St.︱Weight 140 kg︱
            Dimensions (L/W/H) 700x655x1400 mm
            Filter capacity / m²
            Number of filters 1 St.
            Number of dust containers 1 St.
            Weight 140 kg


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Chip and dust extracting systems Exhausting system ALKO PROFI-JET BG2 3,2X6,5X1,6


          • MW-MACHINES
          • Dorf 9
          • 4133 Hofkirchen
          • Österreich

          • +43 (0)66718068977
            -
          • info@machines-mw.at
            machines-mw.at
          #2077-90033 · Exhausting system

          ALKO - PROFI-JET BG2 3,2X6,5X1,6 - - 2009 -

          Technical details
          volume capacity 14000 m³/h︱Filter capacity 184 m²︱engine output 18,5 kW︱turning speeds 2940 U/min︱
          Total negative pressure: 3,200 Pa Max. Air pressure: 6.5 bar Nominal current: 32.5 A Air filter version: Cartridge category M, el. lt.; 1.4m; Art. No.:3340218200 1x wall extraction unit 2 x 0.3 x 1m (L x W x H) 4x extraction arm
            volume capacity 14000 m³/h
            Filter capacity 184 m²
            engine output 18,5 kW
            turning speeds 2940 U/min
            Description :
            Total negative pressure: 3,200 Pa
            Max. Air pressure: 6.5 bar
            Nominal current: 32.5 A
            Air filter version: Cartridge category M, el. lt.; 1.4m; Art. No.:3340218200

            1x wall extraction unit 2 x 0.3 x 1m (L x W x H)
            4x extraction arm


        • MW-MACHINES
        • Dorf 9
        • 4133 Hofkirchen
        • Österreich

        • Datasheet
          Request / Contact
          used Chip and dust extracting systems Exhausting system SCHUKO EcoVar 04 Solo-160-2020/30/150


          • MWB GmbH & CO. KG
          • Parkstraße 12
          • 09456 Annaberg-Buchholz
          • Deutschland

          • +49 3733 5068501
          • info@mwb-machinetrade.com
            https://www.mwb-machinetrade.com
          #2069-7754 · Exhausting system

          SCHUKO - EcoVar 04 Solo-160-2020/30/150 - - 2007 -

          Technical details
          Filter hose diameter 160 mm︱Filter hose length 3000 mm ︱Weight 1750 kg︱entry air pressure 6 bar︱working pressure 4 bar︱
          Extraction system for dry dusts (wood chips, wood dust, etc.)
            Filter hose diameter 160 mm
            Filter hose length 3000 mm
            Weight 1750 kg
            entry air pressure 6 bar
            working pressure 4 bar
            Description :
            Extraction system for dry dusts (wood chips, wood dust, etc.)


        • MWB GmbH & CO. KG
        • Parkstraße 12
        • 09456 Annaberg-Buchholz
        • Deutschland

        • Datasheet
          Request / Contact
          used Chip and dust extracting systems Exhausting system KEMPER 91510


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06418 · Exhausting system

          KEMPER - 91510 - - -

          Technical details
          Dimensions (L/W/H) . mm︱Filter capacity . m²︱Number of filters . St.︱ 929063 ︱rated current 2,01,200 m³/min︱
            Dimensions (L/W/H) . mm
            Filter capacity . m²
            Number of filters . St.
            929063
            rated current 2,0
            1,200 m³/min


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact

          Fan

          used Chip and dust extracting systems Fan REITZ / LAMMERS EXH 26.06


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00398 · Fan

          REITZ / LAMMERS - EXH 26.06 - - 2009 - konventionell

          Technical details
          Weight 225 kg︱Year of construction 2009 -︱volume 86,7 m³/min︱Speed 3480 U/min.︱voltage 400 VAC︱voltage 60 Hz︱current intensivity 20,5 A︱inlet temperature 20-80 °C︱floor space required 54,5x86 cm︱
          REITZ / LAMMERS 11kW radial fan EXH 26.06 Volume 86.7m³/min Speed 3480rpm Inlet temperature 20-80°C Density 1.2kg/m³ with LAMMERS engine 1TZ9001-1DA234AB4-Z 400VAC 60Hz 20.5A IE2 with inlet pipe with discharge nozzle Flange square 26.4x40cm with 16 drill holes on 23.5x37cm Flange round Ø 33.3cm with 8 drill holes on Ø 30cm Footprint 54.5x86cm ex-proof unused Year of construction 2009 Weight 225kg Currently there are 3 pieces in stock. You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            Weight 225 kg
            Year of construction 2009 -
            volume 86,7 m³/min
            Speed 3480 U/min.
            voltage 400 VAC
            voltage 60 Hz
            current intensivity 20,5 A
            inlet temperature 20-80 °C
            floor space required 54,5x86 cm
            Description :
            REITZ / LAMMERS
            11kW radial fan
            EXH 26.06
            Volume 86.7m³/min
            Speed 3480rpm
            Inlet temperature 20-80°C
            Density 1.2kg/m³
            with LAMMERS engine
            1TZ9001-1DA234AB4-Z
            400VAC 60Hz
            20.5A
            IE2
            with inlet pipe
            with discharge nozzle
            Flange square 26.4x40cm with
            16 drill holes
            on 23.5x37cm
            Flange round Ø 33.3cm with
            8 drill holes on Ø 30cm
            Footprint 54.5x86cm
            ex-proof
            unused
            Year of construction 2009
            Weight 225kg

            Currently there are 3 pieces in stock.

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 2.800 €
          Datasheet
          Request / Contact

          Filtering system

          used Chip and dust extracting systems Filtering system HOECKER


          • Rauscher & Reyhing GmbH
          • Meidelstetter Str. 13
          • 72531 Hohenstein
          • Deutschland

          • (0049)7387 988414
            (0049)7387 988429
          • wolfgang.rauscher@rauscher-reyhing.de
            www.rauscher-reyhing.de
          #1314-38027 · Filtering system

          HOECKER - - - unbekannt -

          Technical details
          7,5 kW︱diameter 300 mm︱ 7400 m3/Std.︱
            7,5 kW
            diameter 300 mm
            7400 m3/Std.


        • Rauscher & Reyhing GmbH
        • Meidelstetter Str. 13
        • 72531 Hohenstein
        • Deutschland

        • Datasheet
          Request / Contact

          Hogger

          used Chip and dust extracting systems Hogger GROSS GAZ 62 V/ 18,5 kW


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6240 · Hogger

          GROSS - GAZ 62 V/ 18,5 kW - - neu -

          Technical details
          600 x 800 mm︱Motor output 18,5 kW︱ 0,6 m³︱Diameter of the motor 252 mm︱Dimensions (L/W/H) 1800x1230x1640 mm︱Weight 1300 kg︱
          Shredder type GAZ 62 V / 18.5 kW, V-rotor ---------------------------------------- Feed opening: 600 x 800 mm Hopper capacity: 0.6 m3 Rotor diameter: 252 mm Rotor working width: 600 mm Rotor speed: 60 - 100 rpm Cutting system: 14 knives 40x40 mm Screen perforation: 20 / 25 mm or as required Control: electronically via PLC Control cabinet: completely wired, incl. 5 m cable Motor power: 18.5 kW Connection value: 400 V+/-5%/ 50 Hz. Suction connection Ø: 160 mm Overall dimensions approx. L/W/H 1,800 x 1,230 x 1,640 mm Weight: 1300kg Incl.: -Automatic star-delta start -Automatic off at idle -vibration dampening machine feet -CE compliant -GS mark "dust tested" Option: Second row of knives (then 28 knives), it is recommended if the screen perforation is very small, e.g. if the wood chips are to be briquetted (Technical information according to the manufacturer - without guarantee!)
            600 x 800 mm
            Motor output 18,5 kW
            0,6 m³
            Diameter of the motor 252 mm
            Dimensions (L/W/H) 1800x1230x1640 mm
            Weight 1300 kg
            Description :
            Shredder type GAZ 62 V / 18.5 kW, V-rotor
            ----------------------------------------
            Feed opening: 600 x 800 mm
            Hopper capacity: 0.6 m3
            Rotor diameter: 252 mm
            Rotor working width: 600 mm
            Rotor speed: 60 - 100 rpm
            Cutting system: 14 knives 40x40 mm
            Screen perforation: 20 / 25 mm or as required
            Control: electronically via PLC
            Control cabinet: completely wired, incl. 5 m cable
            Motor power: 18.5 kW
            Connection value: 400 V+/-5%/ 50 Hz.
            Suction connection Ø: 160 mm
            Overall dimensions approx. L/W/H 1,800 x 1,230 x 1,640 mm
            Weight: 1300kg

            Incl.:

            -Automatic star-delta start
            -Automatic off at idle
            -vibration dampening machine feet
            -CE compliant
            -GS mark "dust tested"

            Option:
            Second row of knives (then 28 knives), it is recommended
            if the screen perforation is very small, e.g. if the
            wood chips are to be briquetted

            (Technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact

          Industrial vacuum cleaner

          used Chip and dust extracting systems Industrial vacuum cleaner RINGLER - Kaercher RI 300-W2E


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-09253 · Industrial vacuum cleaner

          RINGLER - Kaercher - RI 300-W2E - - 2007 -

          Technical details
          output 2,5 kw︱motor speed 15000 U/min︱ampere 11,8 ︱weight ca. 75 kg︱range L-W-H 0,8 x 0,6 x 1,5 m︱electric 230 volt ︱CE signed
          Machine dealer with own stock of 1600 m².
            output 2,5 kw
            motor speed 15000 U/min
            ampere 11,8
            weight ca. 75 kg
            range L-W-H 0,8 x 0,6 x 1,5 m
            Description :
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Chip and dust extracting systems Industrial vacuum cleaner RINGLER


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-732721 · Industrial vacuum cleaner

          RINGLER - - - -

          Technical details
          DIMENSIONS / WEIGHTS . ︱ - total weight approx. 150 kg︱
            DIMENSIONS / WEIGHTS .
            - total weight approx. 150 kg


        • Goedicke Werkzeugmaschinenhandels GmbH
        • Heinz-Nixdorf-Str. 2
        • 74172 Neckarsulm
        • Deutschland

        • Datasheet
          Request / Contact

          Suction device

          used Chip and dust extracting systems Suction device DIETZ DG 25


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1003 · Suction device

          DIETZ - DG 25 - - unbekannt -

          Technical details
          Dimensions (L/W/H) ca. 700 x 500 x 1.080 mm︱current intensivity 0,73 / 0,42 A︱weight ca. 80 kg︱
            Dimensions (L/W/H) ca. 700 x 500 x 1.080 mm
            current intensivity 0,73 / 0,42 A
            weight ca. 80 kg


        • SKM Industriemaschinen
        • Röntgenstr. 3
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact
          used Chip and dust extracting systems Suction device ELEKTRA-BECKUM SPA 2000


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06218 · Suction device

          ELEKTRA-BECKUM - SPA 2000 - - unbekannt -

          Technical details
          Dust suction hood x mm︱Motor output x kW︱Air consumption 2000 m³/h︱
          ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
            Dust suction hood x mm
            Motor output x kW
            Air consumption 2000 m³/h
            Description :

            ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
            Please note:
            The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.
            Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.
            ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact

          Warm air oven

          used Chip and dust extracting systems Warm air oven ALLOG Technikat


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00423 · Warm air oven

          ALLOG - Technikat - - 2019 - konventionell

          Technical details
          year of construction 2019 -︱weight 20 kg︱temperature max. 500 °C︱flow rate 25 Nm³/h︱power 2,9 kVA︱voltage 230 V︱frequency 50 Hz︱
          ALLOG Technikum catalyst TECHNIKAT No. 19160025 Tmax.= 500°C V = 25Nm³/h 2.9kVA 230V 50Hz for catalytic afterburning for exhaust air purification with feed tube previously used after hardening oven year of construction 2019 (OP 3850 €) barely used weight 20kg You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            year of construction 2019 -
            weight 20 kg
            temperature max. 500 °C
            flow rate 25 Nm³/h
            power 2,9 kVA
            voltage 230 V
            frequency 50 Hz
            Description :
            ALLOG
            Technikum catalyst
            TECHNIKAT
            No. 19160025
            Tmax.= 500°C
            V = 25Nm³/h
            2.9kVA
            230V 50Hz
            for catalytic afterburning
            for exhaust air purification
            with feed tube
            previously used after hardening oven
            year of construction 2019 (OP 3850 €)
            barely used
            weight 20kg

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 2.000 €
          Datasheet
          Request / Contact
          used Chip and dust extracting systems Warm air oven MC METALMECCANICA DI CENNI G: Martina 240


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3661 · Warm air oven

          MC METALMECCANICA DI CENNI G: - Martina 240 - - 2014, unbenutzt -

          Technical details
          Heat output capacity 233 KW︱Air consumption 18000 m³/h︱Dimensions (L/W/H) ca. 1110 x 1685 x 2585 mm︱Weight ca. 920 kg︱
            Heat output capacity 233 KW
            Air consumption 18000 m³/h
            Dimensions (L/W/H) ca. 1110 x 1685 x 2585 mm
            Weight ca. 920 kg


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •