,

Bitte einen Suchbegriff eingeben - Unesite pojam za pretraživanje
Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:

          Machines available immediately

          Popis strojeva: Strojevi dostupni odmah


          used Machines available immediately Center Lathe CAZENEUVE HB 575
          Atmh Werkzeugmaschinenhandel GmbH   Ennepetal Scharpenbergerstr.96-98 Deutschland

          ATMH Werkzeugmaschinenhandel GmbH
          CAZENEUVE HB 575
          Center Lathe

          unbekannt

          turning diameter over bed 500 mm
          turning diameter over slide rest 280 mm
          turning length 1000 mm
          CAZENEUVE - HB 575
          Center Lathe
          Request / Contact
          used Machines available immediately Center Lathe CAZENEUVE HB 500 X 1000
          Fimotec   HAGUENAU 20 RUE AMPERE Frankreich

          FIMOTEC
          CAZENEUVE HB 500 X 1000
          Center Lathe

          1965

          turning diameter over bed 500 mm
          turning diameter over slide rest 220 mm
          turning length 1000 mm
          CAZENEUVE - HB 500 X 1000
          Center Lathe
          Request / Contact
          used Machines available immediately Lathe -  cycle-controlled CAZENEUVE OPTIMAX 360
          Marcels Maschinen AG   Beringen (Schaffhausen) Anthoptstrasse 11 Schweiz

          Marcels Maschinen AG
          CAZENEUVE OPTIMAX 360
          Lathe - cycle-controlled

          2013

          turning diameter 380 mm
          turning length 700 mm
          control SIEMENS
          CAZENEUVE - OPTIMAX 360
          Lathe - cycle-controlled
          Request / Contact
          used Machines available immediately Lathe -  cycle-controlled CAZENEUVE OPTICA 360
          Fimotec   HAGUENAU 20 RUE AMPERE Frankreich

          FIMOTEC
          CAZENEUVE OPTICA 360
          Lathe - cycle-controlled

          2000

          turning diameter 380 mm
          turning length 750 mm
          control CNC NUM NUM
          CAZENEUVE - OPTICA 360
          Lathe - cycle-controlled
          Request / Contact
          used Machines available immediately Lathe -  cycle-controlled CAZENEUVE MAXICA HC 725
          Fimotec   HAGUENAU 20 RUE AMPERE Frankreich

          FIMOTEC
          CAZENEUVE MAXICA HC 725
          Lathe - cycle-controlled

          1998

          turning diameter 725 mm
          turning length 4000 mm
          control SOMAB PL + S5 + -SOMAB
          CAZENEUVE - MAXICA HC 725
          Lathe - cycle-controlled
          Request / Contact
          used Machines available immediately lathe-conventional-electronic CAZENEUVE HB 500
          Kurt Steiger Werkzeugmaschinen GmbH   Wiesbaden Flachstr. 11 Deutschland

          Kurt Steiger Werkzeugmaschinen GmbH
          CAZENEUVE HB 500
          lathe-conventional-electronic

          turning diameter mm
          turning length mm
          swing diameter over bed slide mm
          CAZENEUVE - HB 500
          lathe-conventional-electronic
          Request / Contact
          used Machines available immediately lathe-conventional-electronic Cazeneuve HB 575
          Jansen Machinehandel BV   Etten-leur Bredaseweg 210 Nederland

          Jansen Machinehandel BV
          Cazeneuve HB 575
          lathe-conventional-electronic

          Distance between centers 1500 mm
          Centre height 255 mm
          Swing over bed 510 mm ø
          Cazeneuve - HB 575
          lathe-conventional-electronic
          Request / Contact
          used Machines available immediately lathe-conventional-electronic Cazeneuve HB
          Jansen Machinehandel BV   Etten-leur Bredaseweg 210 Nederland

          Jansen Machinehandel BV
          Cazeneuve HB
          lathe-conventional-electronic

          Distance between centers 1500 mm
          Centre height 220 mm
          Swing over bed 440 mm ø
          Cazeneuve - HB
          lathe-conventional-electronic
          Request / Contact
          used Machines available immediately lathe-conventional-electronic Cazeneuve HB 575
          Jansen Machinehandel BV   Etten-leur Bredaseweg 210 Nederland

          Jansen Machinehandel BV
          Cazeneuve HB 575
          lathe-conventional-electronic

          Distance between centers 1.450 mm
          Swing over bed 575 mm ø
          Swing over support 280 mm ø
          Cazeneuve - HB 575
          lathe-conventional-electronic
          Request / Contact
          used Machines available immediately lathe-conventional-electronic Cazeneuve HB 575
          Jansen Machinehandel BV   Etten-leur Bredaseweg 210 Nederland

          Jansen Machinehandel BV
          Cazeneuve HB 575
          lathe-conventional-electronic

          Distance between centers 1400 mm
          Centre height 265 mm
          Swing over bed 530 mm ø
          Cazeneuve - HB 575
          lathe-conventional-electronic
          Request / Contact
          used Machines available immediately 4 side moulder WEINIG Profimat 23
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Profimat 23
          4 side moulder

          gebraucht

          Number of spindles 6 St.
          Working width 230 mm
          Working height 120 mm
          WEINIG - Profimat 23
          4 side moulder
          Request / Contact
          used Machines available immediately 4 side moulder WEINIG Powermat 400 CNC_Powerlock
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Powermat 400 CNC_Powerlock
          4 side moulder

          gebraucht

          Number of spindles 6 St.
          Working width 230 mm
          Working height 120 mm
          WEINIG - Powermat 400 CNC_Powerlock
          4 side moulder
          Request / Contact
          used Machines available immediately 4 side moulder WEINIG Powermat 500 Fenster
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Powermat 500 Fenster
          4 side moulder

          gebraucht

          Number of spindles 6 St.
          Working width 230 mm
          Working height 120 mm
          WEINIG - Powermat 500 Fenster
          4 side moulder
          Request / Contact
          used Machines available immediately 4 side moulder WEINIG Unimat 23 E Fenster
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unimat 23 E Fenster
          4 side moulder

          gebraucht

          Number of boring spindles 6 St.
          Working width 230 mm
          Working height 120 mm
          WEINIG - Unimat 23 E Fenster
          4 side moulder
          Request / Contact
          used Machines available immediately Outside profiling machine WEINIG Univar 10/3
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Univar 10/3
          Outside profiling machine

          gebraucht

          Number of spindles 4 St.
          Number of tools 11 St.
          Spindle diameter 50,40 mm
          WEINIG - Univar 10/3 12.000 €
          Outside profiling machine
          Request / Contact
          used Machines available immediately Outside profiling machine WEINIG Univar 6 P
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Univar 6 P
          Outside profiling machine

          gebraucht

          Number of boring spindles 3 St.
          Number of tools 1.3/4.1. St.
          Spindle diameter 50,40 mm
          WEINIG - Univar 6 P 7.000 €
          Outside profiling machine
          Request / Contact
          used Machines available immediately Transport system WEINIG DEF 25
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG DEF 25
          Transport system

          gebraucht

          working length 2000 mm
          Working width 250 mm
          Working height 970 mm
          WEINIG - DEF 25 2.500 €
          Transport system
          Request / Contact
          used Machines available immediately Window production centre WEINIG Unicontrol 6 NC Spindeln
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unicontrol 6 NC Spindeln
          Window production centre

          neuwertig

          Tenoning spindle 1 0
          Number of milling agregates 5 St.
          Spindle diameter 50 mm
          WEINIG - Unicontrol 6 NC Spindeln
          Window production centre
          Request / Contact
          used Machines available immediately Window production centre WEINIG Unicontrol 6 NC Spindeln
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unicontrol 6 NC Spindeln
          Window production centre

          gebraucht

          Tenoning spindle 1 St.
          Number of milling agregates 4 St.
          Spindle diameter 50 mm
          WEINIG - Unicontrol 6 NC Spindeln
          Window production centre
          Request / Contact
          used Machines available immediately Window production centre WEINIG Unicontrol 12 NC
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unicontrol 12 NC
          Window production centre

          gebraucht

          Tenoning spindle 2 St.
          Number of milling agregates 7 St.
          Spindle diameter 50 mm
          WEINIG - Unicontrol 12 NC
          Window production centre
          Request / Contact
          used Machines available immediately Window production centre WEINIG Unicontrol 6
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unicontrol 6
          Window production centre

          gebraucht

          Tenoning spindle 1 St.
          Number of milling agregates 4 St.
          Spindle diameter 50 mm
          WEINIG - Unicontrol 6 7.500 €
          Window production centre
          Request / Contact
          used Machines available immediately Window production centre WEINIG Unicontrol 12 NC
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unicontrol 12 NC
          Window production centre

          gebraucht

          Tenoning spindle 2 St.
          Number of milling agregates 7 St.
          Spindle diameter 50 mm
          WEINIG - Unicontrol 12 NC
          Window production centre
          Request / Contact
          used Machines available immediately Window production centre WEINIG Unicontrol 6 NC Spindeln
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unicontrol 6 NC Spindeln
          Window production centre

          gebraucht

          Tenoning spindle 1 St.
          Number of milling agregates 4 St.
          Spindle diameter 50 mm
          WEINIG - Unicontrol 6 NC Spindeln
          Window production centre
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer: