,

Bitte einen Suchbegriff eingeben - Unesite pojam za pretraživanje
Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:

          Machines available immediately

          Popis strojeva: Strojevi dostupni odmah


          used Machines available immediately Drilling and Milling M/C JUARISTI JUARISTI TX1
          Aleman Machines E.k.   Lauchheim Am Mühlweg 1 Deutschland

          Aleman Machines e.K.
          JUARISTI JUARISTI TX1
          Drilling and Milling M/C

          2008

          x-travel 2.500 mm
          y-travel 1.500 mm
          z-travel 1.500 mm
          JUARISTI - JUARISTI TX1
          Drilling and Milling M/C
          Request / Contact
          used Machines available immediately Floor Type Boring and Milling M/C - Hor. JUARISTI 205 M CNC
          Markus Hirsch GmbH   Dorsten Hüttenstrasse 1 Deutschland

          Markus Hirsch GmbH
          JUARISTI 205 M CNC
          Floor Type Boring and Milling M/C - Hor.

          1993

          spindle diameter 205 mm
          x-travel 10000 mm
          y-travel 2500 mm
          JUARISTI - 205 M CNC
          Floor Type Boring and Milling M/C - Hor.
          Request / Contact
          used Machines available immediately Floor Type Boring and Milling M/C - Hor. JUARISTI 110
          Markus Hirsch GmbH   Dorsten Hüttenstrasse 1 Deutschland

          Markus Hirsch GmbH
          JUARISTI 110
          Floor Type Boring and Milling M/C - Hor.

          1990

          spindle diameter 110 mm
          x-travel 4440 mm
          y-travel 1500 mm
          JUARISTI - 110
          Floor Type Boring and Milling M/C - Hor.
          Request / Contact
          used Machines available immediately Machining Center - Universal JUARISTI TS-3 - -MG 12
          Aleman Machines E.k.   Lauchheim Am Mühlweg 1 Deutschland

          Aleman Machines e.K.
          JUARISTI TS-3 - -MG 12
          Machining Center - Universal

          2009

          x-travel 3.000 mm
          y-travel 2.500 mm
          z-travel 2.475 mm
          JUARISTI - TS-3 - -MG 12
          Machining Center - Universal
          Request / Contact
          used Machines available immediately Ram-Type Floor Boring and Milling M/C JUARISTI MX 7
          Kemmerich Werkzeugmaschinen GmbH  Monheim am Rhein Im Rottfeld 1a Deutschland

          Kemmerich Werkzeugmaschinen
          JUARISTI MX 7
          Ram-Type Floor Boring and Milling M/C

          2003

          spindle diameter 200 mm
          x-travel 8000 mm
          y-travel 3000 mm
          JUARISTI - MX 7
          Ram-Type Floor Boring and Milling M/C
          Request / Contact
          used Machines available immediately Table Type Boring and Milling Machine JUARISTI TS1
          Markus Hirsch GmbH   Dorsten Hüttenstrasse 1 Deutschland

          Markus Hirsch GmbH
          JUARISTI TS1
          Table Type Boring and Milling Machine

          1989

          spindle diameter 125 mm
          x-travel 3000 mm
          y-travel 1500 mm
          JUARISTI - TS1
          Table Type Boring and Milling Machine
          Request / Contact
          used Machines available immediately Table Type Boring and Milling Machine JUARISTI TS1
          Harry Vraets Machinery B.V.   Nijkerk Gezellenstraat 2 Niederlande

          Harry Vraets Machinery B.V.
          JUARISTI TS1
          Table Type Boring and Milling Machine

          1989

          spindle diameter 125 mm
          x-travel 3000 mm
          y-travel 1500 mm
          JUARISTI - TS1
          Table Type Boring and Milling Machine
          Request / Contact
          used Machines available immediately Table Type Boring and Milling Machine JUARISTI MDR105 cnc
          Intermach BV   Marknesse lange voor 71 Niederlande

          Intermach BV
          JUARISTI MDR105 cnc
          Table Type Boring and Milling Machine

          1983

          spindle diameter 105 mm
          x-travel 1000 mm
          y-travel 1000 mm
          JUARISTI - MDR105 cnc
          Table Type Boring and Milling Machine
          Request / Contact
          used Machines available immediately milling machining centers - universal JUARISTI MX3 D4000
          Knops Werkzeugmaschinen GmbH  &  Co. KG  Monheim Konrad-Zuse-Straße 5 Deutschland

          Knops Werkzeugmaschinen
          JUARISTI MX3 D4000
          milling machining centers - universal

          2006

          x-travel 4000 mm
          y-travel 1500 mm
          z-travel 3500 mm
          JUARISTI - MX3 D4000
          milling machining centers - universal
          Request / Contact
          used Machines available immediately Travelling column milling machine JUARISTI MX 3
          Kemmerich Werkzeugmaschinen GmbH  Monheim am Rhein Im Rottfeld 1a Deutschland

          Kemmerich Werkzeugmaschinen
          JUARISTI MX 3
          Travelling column milling machine

          2007

          x-travel 4000 mm
          y-travel 1500 mm
          z-travel 3500 mm
          JUARISTI - MX 3
          Travelling column milling machine
          Request / Contact
          used Machines available immediately 4 side moulder WEINIG Powermat 600 Fenster
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Powermat 600 Fenster
          4 side moulder

          neuwertig

          Number of spindles 5 St.
          Working width 230 mm
          Working height 120 mm
          WEINIG - Powermat 600 Fenster
          4 side moulder
          Request / Contact
          used Machines available immediately 4 side moulder WEINIG Profimat 23
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Profimat 23
          4 side moulder

          gebraucht

          Number of spindles 6 St.
          Working width 230 mm
          Working height 120 mm
          WEINIG - Profimat 23
          4 side moulder
          Request / Contact
          used Machines available immediately 4 side moulder WEINIG Powermat 500 Fenster
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Powermat 500 Fenster
          4 side moulder

          gebraucht

          Number of spindles 6 St.
          Working width 230 mm
          Working height 120 mm
          WEINIG - Powermat 500 Fenster
          4 side moulder
          Request / Contact
          used Machines available immediately 4 side moulder WEINIG Powermat 400 CNC_Powerlock
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Powermat 400 CNC_Powerlock
          4 side moulder

          gebraucht

          Number of spindles 6 St.
          Working width 230 mm
          Working height 120 mm
          WEINIG - Powermat 400 CNC_Powerlock
          4 side moulder
          Request / Contact
          used Machines available immediately 4 side moulder WEINIG Unimat 23 E Fenster
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unimat 23 E Fenster
          4 side moulder

          gebraucht

          Number of boring spindles 6 St.
          Working width 230 mm
          Working height 120 mm
          WEINIG - Unimat 23 E Fenster
          4 side moulder
          Request / Contact
          used Machines available immediately Outside profiling machine WEINIG Univar 10/3
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Univar 10/3
          Outside profiling machine

          gebraucht

          Number of spindles 4 St.
          Number of tools 11 St.
          Spindle diameter 50,40 mm
          WEINIG - Univar 10/3
          Outside profiling machine
          Request / Contact
          used Machines available immediately Outside profiling machine WEINIG Univar 6 P
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Univar 6 P
          Outside profiling machine

          gebraucht

          Number of boring spindles 3 St.
          Number of tools 1.3/4.1. St.
          Spindle diameter 50,40 mm
          WEINIG - Univar 6 P 6.000 €
          Outside profiling machine
          Request / Contact
          used Machines available immediately Transport system WEINIG DEF 25
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG DEF 25
          Transport system

          gebraucht

          working length 2000 mm
          Working width 250 mm
          Working height 970 mm
          WEINIG - DEF 25 2.500 €
          Transport system
          Request / Contact
          used Machines available immediately Window production centre WEINIG Unicontrol 6 NC Spindeln
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unicontrol 6 NC Spindeln
          Window production centre

          neuwertig

          Tenoning spindle 1 0
          Number of milling agregates 5 St.
          Spindle diameter 50 mm
          WEINIG - Unicontrol 6 NC Spindeln
          Window production centre
          Request / Contact
          used Machines available immediately Window production centre WEINIG Unicontrol 12 NC
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unicontrol 12 NC
          Window production centre

          gebraucht

          Tenoning spindle 2 St.
          Number of milling agregates 7 St.
          Spindle diameter 50 mm
          WEINIG - Unicontrol 12 NC
          Window production centre
          Request / Contact
          used Machines available immediately Window production centre WEINIG Unicontrol 12 NC
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unicontrol 12 NC
          Window production centre

          gebraucht

          Tenoning spindle 2 St.
          Number of milling agregates 7 St.
          Spindle diameter 50 mm
          WEINIG - Unicontrol 12 NC
          Window production centre
          Request / Contact
          used Machines available immediately Window production centre WEINIG Unicontrol 6 NC Spindeln
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unicontrol 6 NC Spindeln
          Window production centre

          gebraucht

          Tenoning spindle 1 St.
          Number of milling agregates 4 St.
          Spindle diameter 50 mm
          WEINIG - Unicontrol 6 NC Spindeln
          Window production centre
          Request / Contact
          used Machines available immediately Window production centre WEINIG Unicontrol 6
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unicontrol 6
          Window production centre

          gebraucht

          Tenoning spindle 1 St.
          Number of milling agregates 4 St.
          Spindle diameter 50 mm
          WEINIG - Unicontrol 6 7.500 €
          Window production centre
          Request / Contact
          used Machines available immediately Window production centre WEINIG Unicontrol 6 NC Spindeln
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unicontrol 6 NC Spindeln
          Window production centre

          gebraucht

          Tenoning spindle 1 St.
          Number of milling agregates 4 St.
          Spindle diameter 50 mm
          WEINIG - Unicontrol 6 NC Spindeln
          Window production centre
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer: