,

Bitte einen Suchbegriff eingeben - Unesite pojam za pretraživanje
Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:

          Machines available immediately

          Popis strojeva: Strojevi dostupni odmah


          used Machines available immediately Center Lathe HEIDENREICH & HARBECK E3H
          Christoph Busch GmbH   Korschenbroich Dieselstr. 22 Deutschland

          Christoph Busch GmbH
          HEIDENREICH & HARBECK E3H
          Center Lathe

          1966

          .
          centre distance 3000 mm
          max. swing diameter 660 mm
          HEIDENREICH & HARBECK - E3H
          Center Lathe
          Request / Contact
          used Machines available immediately Center Lathe HEIDENREICH & HARBECK S500
          Christoph Busch GmbH   Korschenbroich Dieselstr. 22 Deutschland

          Christoph Busch GmbH
          HEIDENREICH & HARBECK S500
          Center Lathe

          1955

          serial number 80131-0271
          centre distance 2000 mm
          centre height 250 mm
          HEIDENREICH & HARBECK - S500
          Center Lathe
          Request / Contact
          used Machines available immediately Center Lathe HEIDENREICH & HARBECK V 3
          Markus Hirsch GmbH   Dorsten Hüttenstrasse 1 Deutschland

          Markus Hirsch GmbH
          HEIDENREICH & HARBECK V 3
          Center Lathe

          1953

          turning diameter over bed 540 mm
          turning diameter over slide rest 270 mm
          turning length 2500 mm
          HEIDENREICH & HARBECK - V 3
          Center Lathe
          Request / Contact
          used Machines available immediately Center Lathe HEIDENREICH & HARBECK V 630
          Markus Hirsch GmbH   Dorsten Hüttenstrasse 1 Deutschland

          Markus Hirsch GmbH
          HEIDENREICH & HARBECK V 630
          Center Lathe

          turning diameter over bed 630 mm
          turning diameter over slide rest 380 mm
          turning length 400 mm
          HEIDENREICH & HARBECK - V 630
          Center Lathe
          Request / Contact
          used Machines available immediately lathe-conventional-electronic HEIDENREICH & HARBECK HAMBURG 250
          A + B Werkzeuge Maschinen Handels GmbH   Ahaus Rottweg 17 Deutschland

          A + B Werkzeuge Maschinen Handels GmbH
          HEIDENREICH & HARBECK HAMBURG 250
          lathe-conventional-electronic

          1982

          turning length 920 mm
          turning diameter over bed 260 mm
          turning diameter over slide rest 140 mm
          HEIDENREICH & HARBECK - HAMBURG 250
          lathe-conventional-electronic
          Request / Contact
          used Machines available immediately lathe-conventional-electronic HEIDENREICH & HARBECK HAMBURG 250
          A + B Werkzeuge Maschinen Handels GmbH   Ahaus Rottweg 17 Deutschland

          A + B Werkzeuge Maschinen Handels GmbH
          HEIDENREICH & HARBECK HAMBURG 250
          lathe-conventional-electronic

          1982

          turning length 920 mm
          turning diameter over bed 260 mm
          turning diameter over slide rest 140 mm
          HEIDENREICH & HARBECK - HAMBURG 250
          lathe-conventional-electronic
          Request / Contact
          used Machines available immediately Bevel Gear Shaping Machine HEIDENREICH & HARBECK 60 HG
          Emuk GmbH Werkzeugmaschinen Spezialist Für Verzahnungsmaschinen  Malsch Siemensstrasse 24 a Deutschland

          EMUK GmbH Werkzeugmaschinen
          HEIDENREICH & HARBECK 60 HG
          Bevel Gear Shaping Machine

          1958

          min/max. wheel diameter at ratio = 1:10 25 / 600 mm
          gear width 90 mm
          module max. spur toothing 2 -9 Modul
          HEIDENREICH & HARBECK - 60 HG
          Bevel Gear Shaping Machine
          Request / Contact
          used Machines available immediately 4 side moulder WEINIG Profimat 23
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Profimat 23
          4 side moulder

          gebraucht

          Number of spindles 6 St.
          Working width 230 mm
          Working height 120 mm
          WEINIG - Profimat 23
          4 side moulder
          Request / Contact
          used Machines available immediately 4 side moulder WEINIG Powermat 500 Fenster
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Powermat 500 Fenster
          4 side moulder

          gebraucht

          Number of spindles 6 St.
          Working width 230 mm
          Working height 120 mm
          WEINIG - Powermat 500 Fenster
          4 side moulder
          Request / Contact
          used Machines available immediately 4 side moulder WEINIG Powermat 400 CNC_Powerlock
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Powermat 400 CNC_Powerlock
          4 side moulder

          gebraucht

          Number of spindles 6 St.
          Working width 230 mm
          Working height 120 mm
          WEINIG - Powermat 400 CNC_Powerlock
          4 side moulder
          Request / Contact
          used Machines available immediately 4 side moulder WEINIG Unimat 23 E
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unimat 23 E
          4 side moulder

          gebraucht

          Number of boring spindles 6 St.
          Working width 230 mm
          Working height 120 mm
          WEINIG - Unimat 23 E
          4 side moulder
          Request / Contact
          used Machines available immediately Outside profiling machine WEINIG Univar 10/3
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Univar 10/3
          Outside profiling machine

          gebraucht

          Number of spindles 4 St.
          Number of tools 11 St.
          Spindle diameter 50,40 mm
          WEINIG - Univar 10/3 12.000 €
          Outside profiling machine
          Request / Contact
          used Machines available immediately Outside profiling machine WEINIG Univar 6 P
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Univar 6 P
          Outside profiling machine

          gebraucht

          Number of boring spindles 3 St.
          Number of tools 1.3/4.1. St.
          Spindle diameter 50,40 mm
          WEINIG - Univar 6 P 7.000 €
          Outside profiling machine
          Request / Contact
          used Machines available immediately Transport system WEINIG DEF 25
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG DEF 25
          Transport system

          gebraucht

          working length 2000 mm
          Working width 250 mm
          Working height 970 mm
          WEINIG - DEF 25 2.500 €
          Transport system
          Request / Contact
          used Machines available immediately Window production centre WEINIG Unicontrol 6 NC Spindeln
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unicontrol 6 NC Spindeln
          Window production centre

          neuwertig

          Tenoning spindle 1 0
          Number of milling agregates 5 St.
          Spindle diameter 50 mm
          WEINIG - Unicontrol 6 NC Spindeln
          Window production centre
          Request / Contact
          used Machines available immediately Window production centre WEINIG Unicontrol 12 NC
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unicontrol 12 NC
          Window production centre

          gebraucht

          Tenoning spindle 2 St.
          Number of milling agregates 7 St.
          Spindle diameter 50 mm
          WEINIG - Unicontrol 12 NC
          Window production centre
          Request / Contact
          used Machines available immediately Window production centre WEINIG Unicontrol 6 NC Spindeln
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unicontrol 6 NC Spindeln
          Window production centre

          gebraucht

          Tenoning spindle 1 St.
          Number of milling agregates 4 St.
          Spindle diameter 50 mm
          WEINIG - Unicontrol 6 NC Spindeln
          Window production centre
          Request / Contact
          used Machines available immediately Window production centre WEINIG Unicontrol 12 NC
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unicontrol 12 NC
          Window production centre

          gebraucht

          Tenoning spindle 2 St.
          Number of milling agregates 7 St.
          Spindle diameter 50 mm
          WEINIG - Unicontrol 12 NC
          Window production centre
          Request / Contact
          used Machines available immediately Window production centre WEINIG Unicontrol 6 NC Spindeln
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unicontrol 6 NC Spindeln
          Window production centre

          gebraucht

          Tenoning spindle 1 St.
          Number of milling agregates 4 St.
          Spindle diameter 50 mm
          WEINIG - Unicontrol 6 NC Spindeln
          Window production centre
          Request / Contact
          used Machines available immediately Window production centre WEINIG Unicontrol 6
          Engelfried Maschinentechnik GmbH   Aalen Elisabethenstr. 41 Deutschland

          Engelfried Maschinentechnik GmbH
          WEINIG Unicontrol 6
          Window production centre

          gebraucht

          Tenoning spindle 1 St.
          Number of milling agregates 4 St.
          Spindle diameter 50 mm
          WEINIG - Unicontrol 6 7.500 €
          Window production centre
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer: