Lathes

turning diameter over bed 425 mm︱centre height 200 mm︱centre distance 1500 mm︱turning diameter over slide rest 235 mm︱turning dia. in gap 470 mm︱spindle bore 45 mm︱camlock D6 ︱lead of leadscrew 6 mm︱tailstock quill taper MT 4 ︱diameter of quill 55 mm︱quill stroke 160 mm︱weight of the machine ca. 1.5 t︱number of spindle speeds 36-2240 ︱

---

Digital read-out Misc accessories More details on www.marcels-maschinen.ch

turning diameter over bed 425 mm︱turning diameter over slide rest 240 mm︱turning length 1500 mm︱turning speeds 45-2240 U/min︱centre height 200 mm︱spindle passage 40 mm︱total power requirement 10 kW︱weight of the machine ca. 3,5 t︱

---

2 cabinets of accessories chuck, faceplate, rolling grains-multifix holder copying device

turning diameter 400 mm︱turning length 692 mm︱control FANUC 32 i manual guide ︱turning speeds 670 U/min︱rapid traverse 224 m/min︱workpiece weight 600 kg︱thread pitch max. 400 mm︱total power requirement 30 kW︱weight of the machine ca. 6 t︱

---

1 disc turret with 12 position, , cylinder shaft, 1 tailstock, , hydr. clamping CONTROL FANUC 21ITB

turning diameter 270 mm︱turning length 640 mm︱control FANUC 31 I TB ︱swing diameter over bed slide 270 mm︱spindle turning speed - stepless 4000 U/min︱spindle bore 66 mm︱power capacity 15 kW︱total power requirement 20 kW︱weight of the machine ca. 9 t︱dimensions of the machine ca. 3, x 2.2 x 2 m︱Manual Guide ︱Powered Tooling ︱12 - tool turret ︱C - axis 0.001° ︱part catcher with ejector ︱Chip-conveyor ︱

---

NICE MACHINE 6 AXIS WITH SUP SPINDEL 2 TURRET 2 X C AXIS Y AXIS LIVE TOOLS WITH LNS BAR FEEDER AND CONVOYER SOMME LIVE TOOLS

turning diameter 460 mm︱turning length 750 mm︱control fanuc 32 i ︱swing dia. 760 mm︱rapid power traverse in X-and Z direction 18/24 m/min︱chucking diameter 250 mm︱bar material dia. 66 mm︱spindle drive 42 kW︱spindle speed: 3500 ︱max. torque on the spindle 730 ︱spindle nose ASA 8" A2 ︱turret stations / rotary tool stations 12/12 ︱RPM of rotary tools 80-4000 1/min︱tailstock quill taper MT MK4 ︱tailstock quill stroke 100 mm︱tailstock quill diameter 110 mm︱Tailstock Travel 990 mm︱bearing for center in tailstock spindle ︱total power requirement 70 kVA︱weight of the machine ca. 6.1 t︱

---

VERY NICE MACHINE ONLY 1900 SPINDEL HOURS SPINDEL BORE DIA 66 MM TURNING LENG 66 MM C AXIS MOWING TOOLS Y AXIS +40/-40MM FANUC 32 I CHIP CONVOYER

turning diameter 400 mm︱turning length 640 mm︱control FANUC 32 ITB ︱bar diameter 52 mm︱travel -x axis 310 mm︱travel -z axis 640 mm︱turning speed range - drive spindle 4500 1/min︱spindle nose JIS A2-6 ︱spindle bore 61 mm︱C-Axis 0,001° ︱spindle bearing diameter 100 mm︱turret head 12 Pos. ︱tool changing time 0,2 sec︱rapid traverse X-axis 30 m/min︱rapid traverse Z-axis 30 m/min︱drive capacity - spindle motor 15/11 kW︱total power requirement 35 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 2,7 x 2,2 x 1,9 m︱

---

VERY NICE MACHINE WITH FANUC 32 IT CHIP CONVOYOR SUP SPINDEL BAR FEEDER C AXIS AND Y AXIS + LIVE TOOLS

turning diameter 510 mm︱turning length 676 mm︱control FANUC 31 A ︱turning speeds 670 U/min︱rapid traverse 24 m/min︱workpiece weight 600 kg︱thread pitch max. 400 mm︱total power requirement 30 kW︱weight of the machine ca. 5.8 t︱dimensions of the machine ca. m︱

---

4 AXIS CNC LATHE WHIT Y AXIS LIVE TOOLS 1 disc turret with 12 position, , cylinder shaft, 1 tailstock, , hydr. clamping CONTROL FANUC 31I A

turning diameter 385 mm︱turning length 400 mm︱control Fanuc 32 I MANUEL GUIDE ︱spindle bore diameter 73 mm︱number of controlled axis 3 ︱turning speed range 20 - 4.000 U/min︱power requirement 17 kW︱rapid speed 30 m/min︱number of tapers in turret head 12 ︱number of driven tools in turret 12 ︱Spindel speed of driven tools 4000 U/min︱Spindelpower on driven tool 6 kW︱tail stock Ja ︱weight 4 t︱

---

CNC-Lathe with driven tools, short magazin barfeeder and partscatcher in very good condition. Equipment: - chipconveyor - 3-jaw-chuck - some toolholders JAPANES - 6 x driven toolholder - partscatcher - Touch setter WITHOUT BAR FEEDER

turning diameter 400 mm︱turning length 840 mm︱control FANUC 18 IT ︱bar diameter 66 mm︱travel -x axis 210 mm︱travel -z axis 840 mm︱turning speed range - drive spindle 40-5000 1/min︱spindle nose JIS A2-6 ︱spindle bore 66 mm︱C-Axis 0,001° ︱spindle bearing diameter 110 mm︱turret head 12 Pos. ︱tool changing time 0,2 sec︱rapid traverse X-axis 18 m/min︱rapid traverse Z-axis 24 m/min︱drive capacity - spindle motor 15/11 kW︱total power requirement 35 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 2,7 x 2,2 x 1,9 m︱

---

VERY NICE MACHINE WITH FANUC 18 IT cHIP CONVOYOR HP POMPE C AXIS AND LIVE TOOLS sup spindel

turning diameter 510 mm︱turning length 640 mm︱control FANUC 31 ITB ︱bar diameter 66 mm︱travel -x axis 240 mm︱travel -z axis 640 mm︱turning speed range - drive spindle 4000 1/min︱spindle nose JIS A2-6 ︱spindle bore 66 mm︱C-Axis 0,001° ︱spindle bearing diameter 110 mm︱turret head 12 Pos. ︱Driven Tools 12 Pos. ︱tool changing time 0,2 sec︱rapid traverse X-axis 18 m/min︱rapid traverse Z-axis 24 m/min︱drive capacity - spindle motor 19/14 kW︱power capacity - milling spindle 14/8 kW︱total power requirement 35 kW︱weight of the machine ca. 5.7 t︱

---

VERY NICE MACHINE WITH FANUC 32 IT WITH SOME LIVE TOOLS SUP SPINDEL HP POMPE C AXIS AND LIVE TOOLS

faceplate diameter 2.500 mm︱swing diameter 3.200 mm︱turning height 2.000 mm︱Control Sinumerik 840D ︱total power requirement 240 kVA︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Vertical Turret Lathe - Double Column / Brand: SCHIESS-FRORIEP / Type: 32 DS 250 Year of construction: 1982 / Modernization: 2005 The modernization included: - New CNC Control: Siemens Sinumerik 840D - New electrical cabinets The machine can be inspected by appointment. Condition: Functional / ready for use. TECHNICAL SPECIFICATIONS: Main dimensions and travels: - Faceplate diameter: 2.500 mm - Turning- and swing diameter max.: 3.200 mm - Turning height above faceplate max.: 2.000 mm - Faceplate load (permissible): 25 tons - Slots: 6 clamping slides - Special chuck with balancing system Right crossbeam support( Travel vertical): 900 mm Right crossbeam support ( Travel horizontal): 1.860 mm - Cross section of the turret head: 400 x 400 mm - Smallest immersion diameter: 710 mm - Tool system description: WSD 200 mm - Shank cross-section of the tools: 40 x 40 mm Left crossbeam support (Travel vertical): 1.000 mm Left crossbeam support (Travel horizontal): 1.770 mm* * of which 50 mm above faceplate centre. The tool changer range is 360 mm. This distance is measured from the reference point to the right. - Cross-section of the chisel slide: 250 x 210 mm - Smallest immersion diameter: 330 mm - Tool system description: WSD 200 mm - Shank cross-section of the tools: 40 x 40 mm Crossbeam, travel (min/max): 50 / 1.500 mm Speeds, feeds, adjustment speeds, cutting forces: Faceplate drive: - Number of gear steps: 2 - Number of speed steps per gear stage: 29 - Step jump: 1,12 - Speed range of I. gear stage: 1,25 - 10 - 31,5 rpm - Speed range of II. gear stage: 5 - 40 - 125 rpm - Nominal speed: 10 rpm Feed drive, right crossbeam support: - Feed rate: 0,1 - 1.000 mm/min - Feed rate: 0,01 - 50 U/mm - Step change: 1,12 - Adjustment speeds in the fixed steps (set up): 2; 20; 200; 6.000 mm/min - Cutting force at 300 mm extension: 50 kN Feed drive, left crossbeam support: - Feed rate: 0,1 - 1.000 mm/min - Feed rate: 0,01 - 50 U/mm - Step change: 1,12 - Adjustment speeds in the fixed steps (set up): 2; 20; 200; 6.000 mm/min Feed drive, side support: - Step change: 1,12 - Cutting force at 450 mm extension: 25 kN Crossbeam adjustment: - Crossbeam speed: approx. 500 mm/min Power, speeds, torques, connection values: Faceplate drive: - Motor power: 12,5 - 100 - 100 kW - Motor speed: 100 - 800 - 2.500 rpm - Torque at the faceplate: 80 kNm Feed drive (right crossbeam support): - Motor power: 5,8 kW - Motor speed: 0,03 / 1.875 rpm - Motor torque: 38 Nm Hydraulic and lubrication systems: - Power of the hydraulic pump motor (central unit): 4 kW - Output of the oil return pump (gearbox, base unit): 0,55 kW - Power of the hydrostatic supply pump: 0,75 kW - Hydrostatic pump power, X-axis: 0,37 kW - Hydrostatic pump power, Z-axis: 0,37 kW - Power of the crossbeam clamping unit (pump motor): 0,9 kW - Coolant pump capacity: 1,25 kW Connection values: - Connection voltage: 380; 50 Hz, Type of current: three-phase - Total connection value: 240 kVA, required back-up fuse: 400 A EQUIPMENT: - CNC Control: Siemens Sinumerik 840D - Turret head, number of tool holders: 9 (number of tools depending on their arrangement) - Chip conveyor - Documentation There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale -

faceplate diameter 3000 mm︱swing diameter 3400 mm︱turning height 2000 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

swing diameter 1.500 mm mm︱faceplate diameter 1.250 mm mm︱control Siemens 840 DSL ︱tool taper 4 Stk. ︱turning height 1.250 mm mm︱total power requirement / kW︱weight of the machine ca. / t︱dimensions of the machine ca. / m︱

---

faceplate diameter 3500 mm︱workpiece height 3000 mm︱ 160 mm︱ 1998 ︱Control Siemens 840 C ︱max. table load 60000 kg︱electr. connected load 400 V︱Serial number 11 33 0051 ︱total power requirement 71 kW︱weight of the machine ca. / t︱required space 13 x 6 m︱

---

The SCHIESS-FRORIEP 40 DV is a vertical lathe built in 1980. The machine was modernized and improved in 1998. Among other things, a driven tool system (C-axis) was installed. In addition, the control system was modernized to SIEMENS 840 C. The large open-sided vertical boring mills with travelling column - type DV - are particularly suited to situations where likely workpieces frequently change in diameter but where maximum workpiece dimensions are rare. Decisions in favour of this type of machine are generally due to minimum floor space requirement, universal adaptability and economical advantages. The modern design of these machines is characterized by rigid all-steel construction optimized by computer - SCHIESS can claim to have done much valuable pioneering work in this area of heavy-duty machine tool building.

faceplate diameter 1250 mm︱swing diameter 1400 mm︱turning height 1150 mm︱workpiece weight 8 t︱cross rail adjustment 800 mm︱tool travel 700 ︱pivoting angle 45 +/- Grad︱weight of the machine ca. 13 t︱dimensions of the machine ca. 3,4 x 5,8 x 4,5 m︱

---

Special equipment: Wet turning device, fine feed chisel device, incl. accessories

faceplate diameter 2500 mm︱swing diameter 3200 mm︱turning height 3100 mm︱Control R&D ︱type MTC 2x-2 ︱workpiece weight 20000 kg︱slide adjustment 1600 mm︱side head - cross travel 1000 mm︱Tool changer ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---