,

Bitte einen Suchbegriff eingeben - Unesite pojam za pretraživanje
Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:

          Lathes

          Machinelist: Lathes


          Center Lathe

          used Lathes Center Lathe NARDINI MS 175E


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3717 · Center Lathe

          NARDINI - MS 175E - - unbekannt -

          Technical details
          greates pass round over bed 175 mm︱swing diameter over slide rest 350 mm︱centre distance 800 mm︱bed width 220 mm︱turning dia. over face-slide 200 mm︱chucking diameter 200 mm︱spindle bore 46 mm︱spindle head Gr. 5 ︱number of spindle speeds 18 ︱spindle turning speed range 25-2000 U/min︱face slide travel 195 mm︱upper slide 125 mm︱quill stroke 130 mm︱quill adjustment 10 mm︱tail stock MK 3 ︱power capacity 4,4 / 2,2 kW︱Dimensions (L/W/H) 1920 x 990 x 1360 mm︱weight of the machine ca. 900 kg︱
          inkl. new digital readout!
            greates pass round over bed 175 mm
            swing diameter over slide rest 350 mm
            centre distance 800 mm
            bed width 220 mm
            turning dia. over face-slide 200 mm
            chucking diameter 200 mm
            spindle bore 46 mm
            spindle head Gr. 5
            number of spindle speeds 18
            spindle turning speed range 25-2000 U/min
            face slide travel 195 mm
            upper slide 125 mm
            quill stroke 130 mm
            quill adjustment 10 mm
            tail stock MK 3
            power capacity 4,4 / 2,2 kW
            Dimensions (L/W/H) 1920 x 990 x 1360 mm
            weight of the machine ca. 900 kg
            Description :
            inkl. new digital readout!


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe REIDEN R200/2


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4848 · Center Lathe

          REIDEN - R200/2 - - 1978 -

          Technical details
          turning diameter over bed 425 mm︱centre height 200 mm︱centre distance 1500 mm︱turning diameter over slide rest 235 mm︱turning dia. in gap 470 mm︱spindle bore 45 mm︱camlock D6 ︱lead of leadscrew 6 mm︱tailstock quill taper MT 4 ︱diameter of quill 55 mm︱quill stroke 160 mm︱weight of the machine ca. 1.5 t︱number of spindle speeds 36-2240
          Digital read-out Misc accessories More details on www.marcels-maschinen.ch
            turning diameter over bed 425 mm
            centre height 200 mm
            centre distance 1500 mm
            turning diameter over slide rest 235 mm
            turning dia. in gap 470 mm
            spindle bore 45 mm
            camlock D6
            lead of leadscrew 6 mm
            tailstock quill taper MT 4
            diameter of quill 55 mm
            quill stroke 160 mm
            weight of the machine ca. 1.5 t
            number of spindle speeds 36-2240
            Description :
            Digital read-out
            Misc accessories

            More details on www.marcels-maschinen.ch


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Lathes Center Lathe REIDEN R200-2


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-3247 · Center Lathe

          REIDEN - R200-2 - - 1967 -

          Technical details
          turning diameter over bed 425 mm︱turning diameter over slide rest 240 mm︱turning length 1500 mm︱turning speeds 45-2240 U/min︱centre height 200 mm︱spindle passage 40 mm︱total power requirement 10 kW︱weight of the machine ca. 3,5 t︱
          2 cabinets of accessories chuck, faceplate, rolling grains-multifix holder copying device
            turning diameter over bed 425 mm
            turning diameter over slide rest 240 mm
            turning length 1500 mm
            turning speeds 45-2240 U/min
            centre height 200 mm
            spindle passage 40 mm
            total power requirement 10 kW
            weight of the machine ca. 3,5 t
            Description :
            2 cabinets of accessories
            chuck, faceplate, rolling grains-multifix holder
            copying device


        • GWM GmbH
        • Gewerbestr. 2
        • 79639 Grenzach-Wyhlen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Center Lathe NARDINI MS 175 E / 800


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12258 · Center Lathe

          NARDINI - MS 175 E / 800 - - -

          Technical details
          turning diameter over bed 350 mm︱turning diameter over slide rest 200 mm︱turning length 800 mm︱spindle bore 46 mm︱spindle turning speed range 18: 25 - 2000 U/min︱spindle head Din 55027 Gr. 5 ︱total power requirement 4,4/2,2 kW︱weight of the machine ca. 800 kg︱dimensions of the machine ca. 2 x 1 x 1,8 m︱Electric 380 Volt ︱3 jaw chuck neu 160 mm︱Multifix-toolholder with tapers ︱Rear chip protect ︱Faceplate Röhm 310 mm︱Motor brake ︱Video available on our website. ︱Condition: ready for operation
          Universal lathe from the training area with new 3-jaw chuck, face plate and multifix holder. It was not heavily used, which can be seen from the little paint wear on the back wall. We ask interested private parties to refrain from making an inquiry, as it is a well-preserved professional machine and is therefore too expensive (+ VAT!) for hobby mechanics. Machine dealer with own stock of 1600 m².
            turning diameter over bed 350 mm
            turning diameter over slide rest 200 mm
            turning length 800 mm
            spindle bore 46 mm
            spindle turning speed range 18: 25 - 2000 U/min
            spindle head Din 55027 Gr. 5
            total power requirement 4,4/2,2 kW
            weight of the machine ca. 800 kg
            dimensions of the machine ca. 2 x 1 x 1,8 m
            3 jaw chuck neu 160 mm
            Faceplate Röhm 310 mm
            Description :
            Universal lathe from the training area with new 3-jaw chuck, face plate and
            multifix holder. It was not heavily used, which can be seen from the little
            paint wear on the back wall.
            We ask interested private parties to refrain from making an inquiry, as it is a
            well-preserved professional machine and is therefore too expensive (+ VAT!) for
            hobby mechanics.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find the best used lathes and more at LagerMaschinen
          Lathes offer versatility and efficiency to your workshop

          Lathes have stood the test of time as some of the most efficient and multi-functional tools. They can be used on a wide variety of material surfaces and can serve a huge number of functions. Whether you need a small lathe for home use or an industrial size lathe for large-scale production, you can find the perfect piece of used equipment to suit your needs at LagerMaschinen. Visit this easy-to-use forum to find the best used machinery for your needs.

          LagerMaschinen - your home for used machines

          Lathes are critical pieces of equipment in a wide variety of sectors. A lathe is capable of grinding, cutting and finishing tiny parts for watch- and jewellery-making, as well as large-scale pieces for automobiles and airplanes. Whether you prefer the control offered by a manually operated lathe or the precision and efficiency of a computer numerical controlled (CNC) lathe, you can find a huge selection at LagerMaschinen, your best source for used machinery.

          Buying used machines is a smart investment

          Smart shoppers know that you dont have to sacrifice quality for affordability when buying machinery for your home or business. Buying used machines is a great way to get the quality you need without straining your budget. If youre in the market for lathes, saws, grinders or any other equipment, you can find a great selection of used machines at LagerMaschinen. Sort results by price, location or brand and find the best used machines around.