Lathes

turning diameter / mm︱turning length / mm︱control Siemens R&D ︱total power requirement / kW︱weight of the machine ca. / t︱required space / m︱

---

turning diameter 220 mm︱turning length 200 mm︱control Siemens Sinumerik ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

turning diameter over bed 3000 mm︱turning diameter over slide rest 2650 mm︱turning length 19000 mm︱Control Siemens ︱type 840 C mm︱faceplate 2500 mm︱turning speeds 0,65-99,2 U/min︱Rest 2 ︱steady 2400 mm︱steady 900 mm︱steady 900 mm︱steady 500 mm︱main drive motor 180 kW︱workpiece weight 100 t︱chip conveyor ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

turning diameter over bed 2000 mm︱turning diameter over slide rest 1600 mm︱turning length 22.000 mm︱turning diameter 2000 mm︱turning length 20.500 mm︱control SIEMENS SINUMERIK 840 D ︱workpiece weight 70.000 KG︱total power requirement Hauptmotor 110 kW︱

---

LATHE FOR HEAVY MACHINING __________________ CONVERSION TO CNC__________________ 2006 __________________TOP WIDTH__________________ 22.000 mm __________________MAXIMUM TURNING LENGTH__________________ SUPPORT 1 20,000 mm SUPPORT 2 20,500 mm ___LARGEST TURNING DIAMETER ___ ABOVE SUPPORT 1600 mm ABOVE BED 2000 mm ____________ WORKPIECE WEIGHT____________ Max. 70,000 KG ____________PLANNING DISC____________ DIAMETER 2000 mm SPEED OF THE FACEPLATE, INFINITELY VARIABLE IN 4 STEPS 1.2 - 75 rpm MAXIMUM TORQUE AT CHARACTERISTIC SPEED 5.65 170,000 Nm MAIN ENGINE 110 kW LARGEST CLAMPING DIAMETER ON THE HEADSTOCK 1640 MM LARGEST CLAMPING DIAMETER ON THE TAILSTOCK 920 MM MOUNTING IN THE ROLLER BLOCK (PASSABLE) 2 PIECES 600 - 1290 mm MOUNTING IN STEADY RESTS (PASSABLE) 100 - 775 mm CONTROL SIEMENS SINUMERIK 840 D _________ SUPPORT 1 (TO THE HEADSTOCK) __________ TRAVEL OF THE UPPER SUPPORT 550 mm SLIDING MOVEMENT OF THE PUSHER 400 mm RAPID ADJUSTMENT LENGTHWISE (RAPID TRAVERSE) 3000 mm/min QUICK ADJUSTMENT FLAT (RAPID TRAVERSE) 1500 mm/min SLIDE HOLDER SITZMANN-HEINLEIN SYSTEM FEEDS STEPLESS FOR LONGITUDINAL 0.5 - 3000 mm/min FEEDS STEPLESS FOR FLAT 0.5 - 1500 mm/min _________ SUPPORT 2__________ MOVEMENT OF THE UPPER SUPPORT 550 mm SLIDING MOVEMENT OF THE SLIDER 400 mm RAPID ADJUSTMENT LENGTHWISE (RAPID TRAVERSE) 3000 mm/min QUICK ADJUSTMENT FLAT (RAPID TRAVERSE) 1500 mm/min SLIDE HOLDER SITZMANN-HEINLEIN SYSTEM FEEDS STEPLESS FOR LONGITUDINAL 0.5 - 3000 mm/min FEEDS STEPLESS FOR FLAT 0.5 - 1500 mm/min _________ RIDING STOCK__________ DIAMETER OF THE FACEPLATE 1200 mm QUILL DIAMETER 350 MM MAXIMUM ADJUSTMENT TRAVEL OF THE QUILL 150 mm CENTER POINT ANGLE 70° QUICK ADJUSTMENT ON THE BED 1850 mm/min _______ Revolutions of the faceplate per minute _______ 1st stage Motor speeds: 130 - 630 - 1575 Faceplate speeds: 1.2 - 5.65 - 14.2 2nd stage Motor speeds: 630 - 1575 Faceplate speeds: 10.8 - 27.2 3rd stage Motor speeds: 630 - 1575 Faceplate speeds: 15.5 - 38.8 4th stage Motor speeds: 630 - 1575 Faceplate speeds: 30 - 75

faceplate diameter 2500 mm︱turning height 1500 mm︱turning diameter over bed 2700 mm︱turning speeds 1,9 - 60 (16x) U/min︱voltage 380 V︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

faceplate diameter 2500 mm︱turning height 1500 mm︱turning diameter over bed 2700 mm︱turning speeds 1,9 - 60 (16x) U/min︱voltage 380 V︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

faceplate diameter 1000 mm︱swing diameter 1400 mm︱turning height 1000 mm︱turning speeds 4-16-20-80-315 U/min︱total power requirement 55 kW︱

---

Machine no.: 379066 With copy facility Base, faceplate and main drive Faceplate diameter: 1000mm Distance from the floor to the top edge of the faceplate: 900mm Permissible faceplate load: 8000kg stands and crossbeams Vertical adjustment of the crossbar: 800mm Adjustment of the transom per minute: 450mm crossbar support Largest outside diameter: 1150mm Largest turning height: 1150mm Largest turning height with a workpiece diameter of up to 800m: 1750mm Largest distance between faceplate and square turret head: 1375mm Largest vertical adjustment of the turret slide: 700mm Dimension of square turret head: 400x400mm Smallest immersion diameter for the turret head: 580mm feed box Number of feeds: 24 Increment: 1.25

faceplate diameter 1800 mm︱swing diameter 2000 mm︱turning height 1750 mm︱max. workpiece weight 12000 kg︱max. torque on the faceplate 2600 kpm︱spindle drive 30 kW︱speeds 4 - 200 U/min︱cross rail adjustment 1400 mm︱stroke of vertical slide 700 mm︱dimensions of the machine ca. 4,5 x 4,5 x 4 m︱

---

faceplate diameter 1550 mm︱swing diameter 1750 mm︱turning height 1250 mm︱slide adjustment 700 mm︱Control Siemens ︱type 840 D︱power capacity 56 kW︱transmission ratio 2 ︱turning speeds 200 U/min︱ ︱live tooling ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---