,

Bitte einen Suchbegriff eingeben - Unesite pojam za pretraživanje
Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:

          Lathes

          Machinelist: Lathes


          CNC Lathe

          used Lathes CNC Lathe SCHIESS Vertiturn 2020 iM


          • Hop Machines
          • Wethouder Lindersstraat 145
          • 5455 GK Wilbertoord
          • Niederlande

          • +31 (0)485478107
          • info@hopmachines.nl
            www.hopmachines.nl
          #2018-5463 · CNC Lathe

          SCHIESS - Vertiturn 2020 iM - - 2016 - Siemens Sinumerik

          Technical details
          turning diameter 220 mm︱turning length 200 mm︱control Siemens Sinumerik ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter 220 mm
            turning length 200 mm
            control Siemens Sinumerik


        • Hop Machines
        • Wethouder Lindersstraat 145
        • 5455 GK Wilbertoord
        • Niederlande

        • Datasheet
          Request / Contact

          Facing Lathe

          used Lathes Facing Lathe ZERBST DP05/W08


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1376 · Facing Lathe

          ZERBST - DP05/W08 - - 1985 - 2010 - Siemens Sinumerik 840D-sl

          Technical details
          faceplate diameter 4.000 mm︱travel -x axis 4.500 mm︱travel -z axis 600 mm︱control Siemens Sinumerik 840D-sl ︱feed range 0 - 8.000 mm/min︱turning speeds 1) 0,7 - 5,6 U/min︱turning speeds 2) 2,8 - 22,4 U/min︱turning speeds 2,1 - 56 U/min︱tool taper Sauter
          Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08
            faceplate diameter 4.000 mm
            travel -x axis 4.500 mm
            travel -z axis 600 mm
            control Siemens Sinumerik 840D-sl
            feed range 0 - 8.000 mm/min
            turning speeds 1) 0,7 - 5,6 U/min
            turning speeds 2) 2,8 - 22,4 U/min
            turning speeds 2,1 - 56 U/min
            tool taper Sauter
            Description :
            Facing Lathe | ZERBST - DP05/W08

            Scope of delivery:

            - Chip conveyor
            - Hydraulic unit

            The ZERBST - DP05/W08 has been retrofitted in 2010.

            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: DP05W08 | DP05 W08 | DP05-W08


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact

          Heavy Duty Lathe

          used Lathes Heavy Duty Lathe ZERBST DxP5/W15x15000


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18487 · Heavy Duty Lathe

          ZERBST - DxP5/W15x15000 - - 1959/2009 - Siemens 840 Dsl

          Technical details
          turning diameter over bed 3000 mm︱turning diameter over slide rest 2400 mm︱turning length 15000 mm︱spindle diameter in front bearing 750 mm︱spindle bore 220 mm︱faceplate diameter 3150 mm︱control Siemens 840 Dsl ︱accuracy +/- bis/up to: 0,01 mm︱spindle motor 110 kW︱faceplate speeds from - to 0,9 - 56 U/min︱workpiece weight max. 80000 kg︱max.workpiece weight:each extra steadyrest - kg︱tail stock ︱tailstock quill diameter 660 mm︱tailstock quill stroke 100 mm︱total power requirement 150 kVA︱weight of the machine ca. 60 t︱
          overhauled and modernized 2009 & 2012/2013 equipped with: - CNC control Siemens 840D SL ShopTurn - 2 supports with 1 controller each - 4-jaw face plate - 2 hydraulic steady rests (1760mm) - hydraulic tailstock Machine is dismantled and stored.
            turning diameter over bed 3000 mm
            turning diameter over slide rest 2400 mm
            turning length 15000 mm
            spindle diameter in front bearin. 750 mm
            spindle bore 220 mm
            faceplate diameter 3150 mm
            control Siemens 840 Dsl
            accuracy +/- bis/up to: 0,01 mm
            spindle motor 110 kW
            faceplate speeds from - to 0,9 - 56 U/min
            workpiece weight max. 80000 kg
            max.workpiece weight:each extra . - kg
            tailstock quill diameter 660 mm
            tailstock quill stroke 100 mm
            total power requirement 150 kVA
            weight of the machine ca. 60 t
            Description :
            overhauled and modernized 2009 & 2012/2013
            equipped with:
            - CNC control Siemens 840D SL ShopTurn
            - 2 supports with 1 controller each
            - 4-jaw face plate
            - 2 hydraulic steady rests (1760mm)
            - hydraulic tailstock

            Machine is dismantled and stored.


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Heavy Duty Lathe ZERBST DXP 5


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-7029 · Heavy Duty Lathe

          ZERBST - DXP 5 - - 1959 / 2012 - Sinumerik 840 D SL

          Technical details
          turning diameter over bed 3.520 mm︱turning diameter over slide rest 3.000 mm︱turning length 15.000 mm︱turning diameter over slide 2.440 mm︱control Sinumerik 840 D SL ︱turning speeds 50 U/min︱workpiece weight max. 80.000 kg︱turning diameter orig. 3500 / mod. 2400 mm︱accuracy +/- 0,01 °︱total power requirement 110 kW︱weight of the machine ca. 154,4 t︱dimensions of the machine ca. 20,7 x 6,0 m︱
          - The modernization (2012) carried out on this machine mainly comprises a new mechanical main gearbox including main spindle drive and the addition of a holding brake plus integration into the existing electrical system. - In the course of the work, it became apparent that the two double-row cylindrical roller bearings had to be reworked.Thus, the entire bearing arrangement was modified and optimally adjusted. - In addition, control and safety-related points had to be modified. - Geometric acceptance report - Temperature behavior of the main spindle bearing arrangement - Test machining Machine is in very good condition. The technical data has been obtained to the best of our ability and belief. It is given in good faith, but its accuracy cannot be guaranteed.
            turning diameter over bed 3.520 mm
            turning diameter over slide rest 3.000 mm
            turning length 15.000 mm
            turning diameter over slide 2.440 mm
            control Sinumerik 840 D SL
            turning speeds 50 U/min
            workpiece weight max. 80.000 kg
            turning diameter orig. 3500 / mod. 2400 mm
            accuracy +/- 0,01 °
            total power requirement 110 kW
            weight of the machine ca. 154,4 t
            dimensions of the machine ca. 20,7 x 6,0 m
            Description :
            - The modernization (2012) carried out on this machine mainly comprises a new
            mechanical main gearbox including
            main spindle drive and the addition of a holding brake plus integration into
            the existing electrical system.
            - In the course of the work, it became apparent that the two double-row
            cylindrical roller bearings had to be
            reworked.Thus, the entire bearing arrangement was modified and optimally
            adjusted.
            - In addition, control and safety-related points had to be modified.
            - Geometric acceptance report
            - Temperature behavior of the main spindle bearing arrangement
            - Test machining

            Machine is in very good condition.

            The technical data has been obtained to the best of our ability and belief.
            It is given in good faith, but its accuracy cannot be guaranteed.




        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact

          Vertical Turret Lathe - Double Column

          used Lathes Vertical Turret Lathe - Double Column SCHIESS KZ 250


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-V0103 · Vertical Turret Lathe - Double Column

          SCHIESS - KZ 250 - - -

          Technical details
          faceplate diameter 2500 mm︱turning height 1500 mm︱turning diameter over bed 2700 mm︱turning speeds 1,9 - 60 (16x) U/min︱voltage 380 V︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            faceplate diameter 2500 mm
            turning height 1500 mm
            turning diameter over bed 2700 mm
            turning speeds 1,9 - 60 (16x) U/min
            voltage 380 V


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Double Column SCHIESS KZ 250


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-11498D · Vertical Turret Lathe - Double Column

          SCHIESS - KZ 250 - - -

          Technical details
          faceplate diameter 2500 mm︱turning height 1500 mm︱turning diameter over bed 2700 mm︱turning speeds 1,9 - 60 (16x) U/min︱voltage 380 V︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            faceplate diameter 2500 mm
            turning height 1500 mm
            turning diameter over bed 2700 mm
            turning speeds 1,9 - 60 (16x) U/min
            voltage 380 V


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used Lathes Vertical Turret Lathe - Single Column SCHIESS 14 DKE 100


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S3516 · Vertical Turret Lathe - Single Column

          SCHIESS - 14 DKE 100 - - 1971 -

          Technical details
          faceplate diameter 1000 mm︱swing diameter 1400 mm︱turning height 1000 mm︱turning speeds 4-16-20-80-315 U/min︱total power requirement 55 kW︱
          Machine no.: 379066 With copy facility Base, faceplate and main drive Faceplate diameter: 1000mm Distance from the floor to the top edge of the faceplate: 900mm Permissible faceplate load: 8000kg stands and crossbeams Vertical adjustment of the crossbar: 800mm Adjustment of the transom per minute: 450mm crossbar support Largest outside diameter: 1150mm Largest turning height: 1150mm Largest turning height with a workpiece diameter of up to 800m: 1750mm Largest distance between faceplate and square turret head: 1375mm Largest vertical adjustment of the turret slide: 700mm Dimension of square turret head: 400x400mm Smallest immersion diameter for the turret head: 580mm feed box Number of feeds: 24 Increment: 1.25
            faceplate diameter 1000 mm
            swing diameter 1400 mm
            turning height 1000 mm
            turning speeds 4-16-20-80-315 U/min
            total power requirement 55 kW
            Description :
            Machine no.: 379066

            With copy facility

            Base, faceplate and main drive
            Faceplate diameter: 1000mm
            Distance from the floor to the top edge of the faceplate: 900mm
            Permissible faceplate load: 8000kg

            stands and crossbeams
            Vertical adjustment of the crossbar: 800mm
            Adjustment of the transom per minute: 450mm

            crossbar support
            Largest outside diameter: 1150mm
            Largest turning height: 1150mm
            Largest turning height with a workpiece diameter of up to 800m: 1750mm
            Largest distance between faceplate and square turret head: 1375mm
            Largest vertical adjustment of the turret slide: 700mm

            Dimension of square turret head: 400x400mm
            Smallest immersion diameter for the turret head: 580mm

            feed box
            Number of feeds: 24
            Increment: 1.25


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find the best used lathes and more at LagerMaschinen
          Lathes offer versatility and efficiency to your workshop

          Lathes have stood the test of time as some of the most efficient and multi-functional tools. They can be used on a wide variety of material surfaces and can serve a huge number of functions. Whether you need a small lathe for home use or an industrial size lathe for large-scale production, you can find the perfect piece of used equipment to suit your needs at LagerMaschinen. Visit this easy-to-use forum to find the best used machinery for your needs.

          LagerMaschinen - your home for used machines

          Lathes are critical pieces of equipment in a wide variety of sectors. A lathe is capable of grinding, cutting and finishing tiny parts for watch- and jewellery-making, as well as large-scale pieces for automobiles and airplanes. Whether you prefer the control offered by a manually operated lathe or the precision and efficiency of a computer numerical controlled (CNC) lathe, you can find a huge selection at LagerMaschinen, your best source for used machinery.

          Buying used machines is a smart investment

          Smart shoppers know that you dont have to sacrifice quality for affordability when buying machinery for your home or business. Buying used machines is a great way to get the quality you need without straining your budget. If youre in the market for lathes, saws, grinders or any other equipment, you can find a great selection of used machines at LagerMaschinen. Sort results by price, location or brand and find the best used machines around.