,

Bitte einen Suchbegriff eingeben - Unesite pojam za pretraživanje
Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:

          Bench Lathe

          Machinelist: Bench Lathe


          Bench Lathe

          used Lathes Bench Lathe KAMI DKM 250V.550


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78007 · Bench Lathe

          KAMI - DKM 250V.550 - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 20 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 60 mm︱metric threading 0,4 - 3,0 mm︱thread - inch 10 - 44 TPI︱thread - module 0,2 - 12,5 mm︱connected load frequency 230 V︱total power requirement 1,0 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 1,09 x 0,59 x 0,45 m︱
          Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 20 mm
            tailstock quill taper MT 2
            tailstock quill stroke 60 mm
            metric threading 0,4 - 3,0 mm
            thread - inch 10 - 44 TPI
            thread - module 0,2 - 12,5 mm
            connected load frequency 230 V
            total power requirement 1,0 kW
            weight of the machine ca. 0,12 t
            dimensions of the machine ca. 1,09 x 0,59 x 0,45 m
            Description :
            Equipped with
            - 20 mm spindle passage
            - adjustable guideways
            - Powerful 1.0 kW motor
            - continuously variable speed
            Scope of delivery:
            - 3-jaw chuck 100 mm,
            - 4-jaw faceplate chuck 125mm
            - standing and rotating bezel
            - Splash guard
            - Feed protection


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 250 x 550 Norton Profi


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78003 · Bench Lathe

          HBM - 250 x 550 Norton Profi - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 125 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,135 t︱dimensions of the machine ca. 1,25 x 0,6 x 0,6 m︱
          Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 125 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,135 t
            dimensions of the machine ca. 1,25 x 0,6 x 0,6 m
            Description :
            Speed in 6 levels 125 - 2000rpm.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm. (Independent)
            Fixed bezel.
            Revolving bezel.
            4-fold steel holder.
            chip tray.
            back panel.
            spindle protection.
            Hardened bed rails.
            Longitudinal feed with left / right switching.
            Set of change gears.
            Associated Tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe ELMAG Superturn Vario mit MFB Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78005 · Bench Lathe

          ELMAG - Superturn Vario mit MFB Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 145 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱connected load frequency 230 V︱bore capacity in steel 16 mm︱throat 169 mm︱quill stroke 50 mm︱turning speed range - drilling 50 - 2250 U/min︱spindle drive 0,5 kW︱total power requirement 0,75 kW︱weight of the machine ca. 0,175 t︱dimensions of the machine ca. 1,3 x 0,65 x 1,3 m︱
          3-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.
            turning diameter over bed 250 mm
            turning diameter over slide rest 145 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            connected load frequency 230 V
            bore capacity in steel 16 mm
            throat 169 mm
            quill stroke 50 mm
            turning speed range - drilling 50 - 2250 U/min
            spindle drive 0,5 kW
            total power requirement 0,75 kW
            weight of the machine ca. 0,175 t
            dimensions of the machine ca. 1,3 x 0,65 x 1,3 m
            Description :
            3-axis LCD digital display system
            longitudinal feed.
            3-jaw chuck 125 mm.
            4-way steel holder.
            chip tray, bulkhead
            Hardened bed tracks.
            Emergency stop switch.
            lining protection
            Tool box, instruction manual.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe KAMI DKM 250L


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78001 · Bench Lathe

          KAMI - DKM 250L - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱
          Equipped with - 27 mm spindle clearance - adjustable guideways - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Danger!! without digital display Scope of delivery: 3-jaw chuck 100 mm, change gear set, splash guard. On request also with 230 volt connection
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 700 mm
            turning speeds 115 - 1620 U/min
            centre height 125 mm
            spindle bore 27 mm
            tailstock quill taper MT 2
            tailstock quill stroke 40 mm
            metric threading 0,2 - 3,5 mm
            thread - inch 8 - 56 inch.
            thread - module 0,2 - 12,5 mm
            swival range +/- Oberschlitten 45 °
            connected load frequency 400 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,41 x 0,61 x 0,41 m
            Description :
            Equipped with
            - 27 mm spindle clearance
            - adjustable guideways
            - Powerful motor with 0.75 kW
            - High resolution of the axis spindles for exact positioning
            - Danger!! without digital display
            Scope of delivery:
            3-jaw chuck 100 mm, change gear set, splash guard.

            On request also with 230 volt connection


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 250 x 550 Profi Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78002 · Bench Lathe

          HBM - 250 x 550 Profi Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 140 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱tailstock quill stroke 65 mm︱connected load frequency 230 V︱total power requirement 1,1 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,3 x 0,6 x 0,65 m︱
          Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools.
            turning diameter over bed 250 mm
            turning diameter over slide rest 140 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            tailstock quill stroke 65 mm
            connected load frequency 230 V
            total power requirement 1,1 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,3 x 0,6 x 0,65 m
            Description :
            Benchtop lathe with base cabinet
            3-axis LCD digital display system fully assembled.
            Longitudinal feed.
            3-jaw chuck 125 mm.
            4-jaw chuck 125 mm.
            Clamping plate.
            4-way steel holder.
            Clock for thread cutting.
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Forage protection
            Set of wheels.
            Appropriate tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe KAMI DKM 250L-1


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78000 · Bench Lathe

          KAMI - DKM 250L-1 - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱
          Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways "by adjustable strips" - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled.
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 700 mm
            turning speeds 115 - 1620 U/min
            centre height 125 mm
            spindle bore 27 mm
            tailstock quill taper MT 2
            tailstock quill stroke 40 mm
            metric threading 0,2 - 3,5 mm
            thread - inch 8 - 56 inch.
            thread - module 0,2 - 12,5 mm
            swival range +/- Oberschlitten 45 °
            connected load frequency 400 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,41 x 0,61 x 0,41 m
            Description :
            Equipped with
            - 2-axis digital measuring system with position indicator
            - manufactured according to DIN 8606
            - 27 mm spindle passage
            - adjustable guideways "by adjustable strips"
            - Strong engine with 0.75 kW
            - High resolution of the axis spindles for exact positioning

            Delivery:
            3-jaw chuck 100 mm, change gear set, splash guard 3-axis
            digital measuring system fully assembled.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe ELMAG Superturn 250 x 550 Vario


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78004 · Bench Lathe

          ELMAG - Superturn 250 x 550 Vario - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 145 mm︱turning length 550 mm︱turning speeds 50 - 2000 U/min︱centre height 125 mm︱spindle bore 26 mm︱tailstock quill taper MT 2 MK︱connected load frequency 230 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 1,3 x 0,65 x 0,6 m︱
          longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.
            turning diameter over bed 250 mm
            turning diameter over slide rest 145 mm
            turning length 550 mm
            turning speeds 50 - 2000 U/min
            centre height 125 mm
            spindle bore 26 mm
            tailstock quill taper MT 2 MK
            connected load frequency 230 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,12 t
            dimensions of the machine ca. 1,3 x 0,65 x 0,6 m
            Description :
            longitudinal feed.
            3-jaw chuck 125 mm.
            4-way steel holder.
            chip tray, bulkhead
            Hardened bed tracks.
            Emergency stop switch.
            lining protection
            Tool box, instruction manual.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe HBM 290 x 750


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78006 · Bench Lathe

          HBM - 290 x 750 - - -neu- -

          Technical details
          turning diameter over bed 290 mm︱turning diameter over slide rest 170 mm︱turning length 750 mm︱turning speeds 75 - 2000 U/min︱centre height 145 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 MK︱tailstock quill stroke 80 mm︱connected load frequency 230 V︱total power requirement 1,5 kW︱weight of the machine ca. 0,34 t︱dimensions of the machine ca. 1,3 x 0,75 x 0,7 m︱
          2-axis LCD digital display system (now new). Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools.
            turning diameter over bed 290 mm
            turning diameter over slide rest 170 mm
            turning length 750 mm
            turning speeds 75 - 2000 U/min
            centre height 145 mm
            spindle bore 38 mm
            tailstock quill taper MT 3 MK
            tailstock quill stroke 80 mm
            connected load frequency 230 V
            total power requirement 1,5 kW
            weight of the machine ca. 0,34 t
            dimensions of the machine ca. 1,3 x 0,75 x 0,7 m
            Description :
            2-axis LCD digital display system (now new).
            Longitudinal and transverse feed.
            3-jaw chuck 160 mm.
            4-jaw chuck 160 mm.
            faceplate
            4-way steel holder with 4 pcs tool holders
            2 pcs. bezels
            Machine light
            Drip tray
            Hardened bed tracks.
            Emergency stop switch.
            Feed protection
            Set of wheels.
            Machine tools.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Bench Lathe SCHAUBLIN 102 N


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4180 · Bench Lathe

          SCHAUBLIN - 102 N - - -

          Technical details
          centre height 102 mm︱Distance between centres 450 mm︱turning dia. over face-slide 120 mm︱turning diameter over bed 200 mm︱spindle taper: W20 ︱spindle bore 22 mm︱number of spindle speeds 18 ︱from/to 45-2500 U/min︱tailstock quill taper MT 2 ︱diameter of quill 30 mm︱quill stroke 110 mm︱dimensions of the machine ca. 1500x800x1400 mmxmmxmm︱weight 380 kg︱accessories and equipment: ︱3-jaw-chuck diameter 100 mm︱quick change tool holder: ︱make MULTIFIX ︱boring chuck 1 ︱misc. accessories
            centre height 102 mm
            Distance between centres 450 mm
            turning dia. over face-slide 120 mm
            turning diameter over bed 200 mm
            spindle taper: W20
            spindle bore 22 mm
            number of spindle speeds 18
            from/to 45-2500 U/min
            tailstock quill taper MT 2
            diameter of quill 30 mm
            quill stroke 110 mm
            dimensions of the machine ca. 1500x800x1400 mmxmmxmm
            weight 380 kg
            3-jaw-chuck diameter 100 mm
            make MULTIFIX
            boring chuck 1


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact

          lathe-conventional-electronic

          used Lathes lathe-conventional-electronic Pinacho S90-180


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3200045 · lathe-conventional-electronic

          Pinacho - S90-180 - - unbekannt -

          Technical details
          turning diameter 360 mm︱turning length 1000 mm︱swing diameter over bed slide 200 mm︱turning speeds 30 - 2000 U/min︱spindle bore 42 mm︱quill stroke 150 mm︱tailstock quill taper MT 3 ︱total power requirement 2,5 kW︱weight of the machine ca. 850 kg︱dimensions of the machine ca. 2200 x 850 x 140 mm︱
          - 4-jaw chuck Ø160 mm RÖHM - MULTIFIX quick-change holder with 1x insert - movable tailstock - Lathe chuck protection - Chip back wall - Operation manual
            turning diameter 360 mm
            turning length 1000 mm
            swing diameter over bed slide 200 mm
            turning speeds 30 - 2000 U/min
            spindle bore 42 mm
            quill stroke 150 mm
            tailstock quill taper MT 3
            total power requirement 2,5 kW
            weight of the machine ca. 850 kg
            dimensions of the machine ca. 2200 x 850 x 140 mm
            Description :
            - 4-jaw chuck Ø160 mm RÖHM
            - MULTIFIX quick-change holder with 1x insert
            - movable tailstock
            - Lathe chuck protection
            - Chip back wall
            - Operation manual



        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic WEILER Praktikant


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6622 · lathe-conventional-electronic

          WEILER - Praktikant - - unbekannt -

          Technical details
          turning diameter over bed 300 mm︱turning diameter over slide rest 150 mm︱turning length 800 mm︱spindle bore 35 mm︱turning speed range 42 - 2000 U/min︱feeds 0,011 - 0,91 mm/U︱tailstock quill taper MT 3 ︱total power requirement 2,2 kW︱weight of the machine ca. 0,75 t︱dimensions of the machine ca. 1,7 x 0,8 x 2,0 m︱
            turning diameter over bed 300 mm
            turning diameter over slide rest 150 mm
            turning length 800 mm
            spindle bore 35 mm
            turning speed range 42 - 2000 U/min
            feeds 0,011 - 0,91 mm/U
            tailstock quill taper MT 3
            total power requirement 2,2 kW
            weight of the machine ca. 0,75 t
            dimensions of the machine ca. 1,7 x 0,8 x 2,0 m
            Description :



        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic MVE BAUART VDF V 5 - 2000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6040 · lathe-conventional-electronic

          MVE BAUART VDF - V 5 - 2000 - - unbekannt -

          Technical details
          turning diameter over bed 580 mm︱turning diameter over slide rest 350 mm︱turning length 2000 mm︱centre height 280 mm︱bed width 490 mm︱spindle passage 81 mm︱turning speeds 18 ︱turning speed range 19 - 950 U/min︱total power requirement 11 kW︱weight of the machine ca. ca. 4,8 t︱dimensions of the machine ca. 4,5 x 1,8 x 1,6 m︱
          Electric 380Volt 3-jaw chuck Forkardt F 315 Quick change steel holder with various inserts machine light Machine feet (6 pieces) Revolving tip Coolant system
            turning diameter over bed 580 mm
            turning diameter over slide rest 350 mm
            turning length 2000 mm
            centre height 280 mm
            bed width 490 mm
            spindle passage 81 mm
            turning speeds 18
            turning speed range 19 - 950 U/min
            total power requirement 11 kW
            weight of the machine ca. ca. 4,8 t
            dimensions of the machine ca. 4,5 x 1,8 x 1,6 m
            Description :
            Electric 380Volt
            3-jaw chuck Forkardt F 315
            Quick change steel holder with various inserts
            machine light
            Machine feet (6 pieces)
            Revolving tip
            Coolant system


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic VDF-BOEHRINGER V5


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06571 · lathe-conventional-electronic

          VDF-BOEHRINGER - V5 - - unbekannt -

          Technical details
          centre distance 2800 mm︱ 900 mm ︱digital ︱weight of the machine ca. 5 t︱dimensions of the machine ca. m︱
            centre distance 2800 mm
            900 mm
            weight of the machine ca. 5 t


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BULMAK / ZMM CU400/1500


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2200002 · lathe-conventional-electronic

          BULMAK / ZMM - CU400/1500 - - NEU -

          Technical details
          turning diameter 440 mm︱turning length 1500 mm︱swing diameter over bed slide 210 mm︱Swingdiameter in the bed bridge 620 mm︱centre height 210 mm︱reus 21 (20 - 2000) U/min︱tail stock MK5 ︱quill stroke 180 mm︱diameter of quill 70 mm︱spindle taper DIN 55027 Nr. 8 ︱spindle bore 62 mm︱feed längs 0,04 - 12 m/min︱feed quer 0,02 - 6 m/min︱total power requirement 7,5 kW︱weight of the machine ca. 2430 kg︱dimensions of the machine ca. 2850 x 980 x 1330 mm︱
          - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE
            turning diameter 440 mm
            turning length 1500 mm
            swing diameter over bed slide 210 mm
            Swingdiameter in the bed bridge 620 mm
            centre height 210 mm
            reus 21 (20 - 2000) U/min
            tail stock MK5
            quill stroke 180 mm
            diameter of quill 70 mm
            spindle taper DIN 55027 Nr. 8
            spindle bore 62 mm
            feed längs 0,04 - 12 m/min
            feed quer 0,02 - 6 m/min
            total power requirement 7,5 kW
            weight of the machine ca. 2430 kg
            dimensions of the machine ca. 2850 x 980 x 1330 mm
            Description :
            - Coolant device
            - Machine light
            - Chip back wall
            - Spindle protection
            - Lathe chuck protection
            - Tool holder protection
            - Interchangeable gears

            *Special equipment
            - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON
            - MULTIFIX quick-change holder type B, including 4 tool holders
            - 3-axis digital display DRO Newall
            - Foot pedal with brake function CE


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BULMAK / ZMM CU325/1000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2200003 · lathe-conventional-electronic

          BULMAK / ZMM - CU325/1000 - - NEU -

          Technical details
          turning diameter 325 mm︱turning length 1000 mm︱swing diameter over bed slide 250 mm︱Swingdiameter in the bed bridge 440 mm︱reus 12 (85-2000) U/min︱tail stock MK 3 ︱quill stroke 100 mm︱diameter of quill 40 mm︱spindle taper DIN 55027 Nr. 5 ︱spindle bore 32 mm︱feed längs 0,006 - 1,77 m/min︱feed quer 0,003 - 0,885 m/min︱total power requirement 2,2 kW︱weight of the machine ca. 770 kg︱dimensions of the machine ca. 2150 x 950 x 1350 mm︱
          Furnishing: - Cooling device - Machine light - chip rear wall - Spindle protection - Lathe chuck protection - Tool holder protection - Foot pedal with braking function CE - Interchangeable gears *incl. Optional equipment - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type A, incl. 4 tool holders - 2-axis digital display DRO Newall
            turning diameter 325 mm
            turning length 1000 mm
            swing diameter over bed slide 250 mm
            Swingdiameter in the bed bridge 440 mm
            reus 12 (85-2000) U/min
            tail stock MK 3
            quill stroke 100 mm
            diameter of quill 40 mm
            spindle taper DIN 55027 Nr. 5
            spindle bore 32 mm
            feed längs 0,006 - 1,77 m/min
            feed quer 0,003 - 0,885 m/min
            total power requirement 2,2 kW
            weight of the machine ca. 770 kg
            dimensions of the machine ca. 2150 x 950 x 1350 mm
            Description :
            Furnishing:
            - Cooling device
            - Machine light
            - chip rear wall
            - Spindle protection
            - Lathe chuck protection
            - Tool holder protection
            - Foot pedal with braking function CE
            - Interchangeable gears

            *incl. Optional equipment
            - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON
            - MULTIFIX quick-change holder type A, incl. 4 tool holders
            - 2-axis digital display DRO Newall


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic OPTIMUM OPTIturn TH4215D


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2200001 · lathe-conventional-electronic

          OPTIMUM - OPTIturn TH4215D - - NEU -

          Technical details
          turning diameter 420 mm︱turning length 1500 mm︱swing diameter over bed slide 250 mm︱Swingdiameter in the bed bridge 590 mm︱centre height 210 mm︱Turning length in the bed bridge 260 mm︱reus 16 (45-1800) U/min︱tail stock MK 4 ︱quill stroke 120 mm︱diameter of quill 50 mm︱spindle taper DIN ISO 702-2 Nr. 6 ︱spindle bore 52 mm︱spindle cone MK 6 ︱feed längs 17 / 0,05 - 1,7 m/min︱feed plan 17 / 0,025 - 0,85 m/min︱total power requirement 4,6 kW︱weight of the machine ca. 1340 kg︱dimensions of the machine ca. 2440 x 915 x 1375 mm︱
          Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool ** Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm ** Quick change holder SWH5-B set
            turning diameter 420 mm
            turning length 1500 mm
            swing diameter over bed slide 250 mm
            Swingdiameter in the bed bridge 590 mm
            centre height 210 mm
            Turning length in the bed bridge 260 mm
            reus 16 (45-1800) U/min
            tail stock MK 4
            quill stroke 120 mm
            diameter of quill 50 mm
            spindle taper DIN ISO 702-2 Nr. 6
            spindle bore 52 mm
            spindle cone MK 6
            feed längs 17 / 0,05 - 1,7 m/min
            feed plan 17 / 0,025 - 0,85 m/min
            total power requirement 4,6 kW
            weight of the machine ca. 1340 kg
            dimensions of the machine ca. 2440 x 915 x 1375 mm
            Description :
            Fully equipped master and feed spindle lathes. TH 4215 with
            digital position indicator DPA 21 / 3462070

            - Hardened and ground Z-axis guideway
            - Spindle mount Camlock DIN ISO 702-2 No. 6
            - Precisely crafted slide
            - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm
            - Quadruple steel holder
            - All guides can be adjusted using V-ledges
            - Adjustment range top slide ± 90°
            - Guaranteed concentricity of the spindle nose better than 0.015 mm
            - Main spindle running in oil bath
            - Smooth-running gear wheels, hardened and ground with 2 adjustable
            Precision tapered roller bearings
            - Hand wheels decoupled and tested according to EN 23125
            - Two-channel right-left switch tested according to EN 23125
            - Switch with life cycle calculation, tested according to EN ISO 13849
            - All metric pitches in the range 0.2 to 14mm/rev and all
            Inch threads in the range of 72 - 2 threads per inch without changing the
            Change gears adjustable by shift lever in the control panel
            - Clockwise/counterclockwise rotation can be switched on the bed slide via the
            switching spindle
            - Central lubrication in bed slide
            - Meehanite cast base and machine bed in one piece
            - Lead screw cover
            - Emergency stop device with foot control
            - Safety handwheels with snap-out function in the X and Z axes
            - Tailstock for taper turning adjustable ± 10 mm
            - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm
            - Quick, easy and tool-free adjustment using a clamping lever
            - Heavily ribbed prism bed, induction hardened and precision ground
            cast iron
            - Coolant device with separate coolant tank with level indicator and
            oil separator; easy and complete emptying and cleaning according to DIN
            - LED machine lamp in the chip guard

            Models TH 4210D and TH 4215D with digital readout DPA21
            - User-friendly membrane keyboard, splash-proof, closed
            andglare-free
            - Glass scales

            scope of delivery
            - Fixed bezel passage Ø 15 - 145 mm
            - Revolving bezel passage Ø 10 - 75 mm
            - LED machine light
            - Reducing sleeve MT 6 / MT 4
            - Fixed center MK 4
            - Change gear set
            - Position stop with fine adjustment
            - Initial filling of the machine with quality oil
            - Operating tool

            ** Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø
            250 mm
            ** Quick change holder SWH5-B set


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic OPTIMUM OPTIturn TH 3309D


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7375 · lathe-conventional-electronic

          OPTIMUM - OPTIturn TH 3309D - - NEU -

          Technical details
          turning diameter 330 mm︱turning length 830 mm︱swing diameter over bed slide 196 mm︱Swingdiameter in the bed bridge 170 ︱centre height 165 mm︱centre distance 830 mm︱Turning length in the bed bridge 430 ︱reus 16 (70-2000) U/min︱tail stock MK 3 ︱quill stroke 110 mm︱diameter of quill 32 mm︱spindle taper DIN ISO 702-2 Nr. 4 ︱spindle bore 38 mm︱spindle cone MK 5 ︱feed längs 32 / 0,052 1,392 m/min︱feed plan 3,2 / 0,014 0,38 m/min︱total power requirement kW︱weight of the machine ca. 0,52 t︱dimensions of the machine ca. 1,7 x 0,75 x 1,6 m︱
          Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spindle running in an oil bath - Gear wheels run smoothly, hardened and ground - Upper slide adjustment range ± 90 ° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Handwheels decoupled and tested according to EN 23125 - Safety handwheels with push-out function in the X and Z axes - Two-channel right-left switch tested according to EN 23125 - DC 24 volt electrical system with two-channel safety circuit according to EN 23125 - Lathe chuck protection tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - Lockable main switch - Clockwise / counterclockwise rotation on the bed slide switchable - Lead screw cover - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and handwheel with adjustable fine scale 0.02 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, inductively hardened and precision ground - Machine base with tool compartment on the right-hand side (left-hand side with 3 Bezels (no compartments) - Pull-out chip tray with guide rails - Emergency stop device with foot actuation - LED machine lamp integrated in the chip guard Digital position indicator DPA 21 - User-friendly membrane keyboard, splash-proof, closed and glare-free - glass rulers scope of delivery - Fixed steady rest passage Ø 6 - Ø 50 mm - Moving steady rest passage Ø 8 - Ø 30 mm - LED machine light - Reduction sleeve MK 5 / MK 3 - Two fixed centering points MK 3 - Quadruple steel holder 16 mm - Change gears set - machine base - Initial machine filling with quality oil - operating tool ** Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4/3442762
            turning diameter 330 mm
            turning length 830 mm
            swing diameter over bed slide 196 mm
            Swingdiameter in the bed bridge 170
            centre height 165 mm
            centre distance 830 mm
            Turning length in the bed bridge 430
            reus 16 (70-2000) U/min
            tail stock MK 3
            quill stroke 110 mm
            diameter of quill 32 mm
            spindle taper DIN ISO 702-2 Nr. 4
            spindle bore 38 mm
            spindle cone MK 5
            feed längs 32 / 0,052 1,392 m/min
            feed plan 3,2 / 0,014 0,38 m/min
            weight of the machine ca. 0,52 t
            dimensions of the machine ca. 1,7 x 0,75 x 1,6 m
            Description :
            Fully equipped leading and tension spindle lathes. TH 3309D with
            digital position indicator DPA 21/3402040

            - Hardened and ground Z-axis guideway
            - Spindle mount Camlock DIN ISO 702-2 No. 4
            - Precisely crafted slide
            - Handwheels with adjustable fine scale 0.04 / 0.02 mm
            - Quadruple steel holder
            - All guides can be adjusted using V-ledges
            - Main spindle running in an oil bath
            - Gear wheels run smoothly, hardened and ground
            - Upper slide adjustment range ± 90 °
            - Guaranteed concentricity of the spindle nose better than 0.015 mm
            - Handwheels decoupled and tested according to EN 23125
            - Safety handwheels with push-out function in the X and Z axes
            - Two-channel right-left switch tested according to EN 23125
            - DC 24 volt electrical system with two-channel safety circuit according to EN
            23125
            - Lathe chuck protection tested according to EN 23125
            - Switch with life cycle calculation, tested according to EN ISO 13849
            - Lockable main switch
            - Clockwise / counterclockwise rotation on the bed slide switchable
            - Lead screw cover
            - Tailstock for taper turning adjustable ± 10 mm
            - Tailstock quill and handwheel with adjustable fine scale 0.02 mm
            - Quick, easy and tool-free adjustment using a clamping lever
            - Heavily ribbed prism bed, inductively hardened and precision ground
            - Machine base with tool compartment on the right-hand side (left-hand side
            with 3
            Bezels (no compartments)
            - Pull-out chip tray with guide rails
            - Emergency stop device with foot actuation
            - LED machine lamp integrated in the chip guard

            Digital position indicator DPA 21
            - User-friendly membrane keyboard, splash-proof, closed
            and glare-free
            - glass rulers

            scope of delivery
            - Fixed steady rest passage Ø 6 - Ø 50 mm
            - Moving steady rest passage Ø 8 - Ø 30 mm
            - LED machine light
            - Reduction sleeve MK 5 / MK 3
            - Two fixed centering points MK 3
            - Quadruple steel holder 16 mm
            - Change gears set
            - machine base
            - Initial machine filling with quality oil
            - operating tool

            ** Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping
            Ø 200 mm Camlock DIN ISO 702-2 No. 4/3442762


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BULMAK / ZMM C10TM/3000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2200004 · lathe-conventional-electronic

          BULMAK / ZMM - C10TM/3000 - - NEU -

          Technical details
          turning diameter 760 mm︱turning length 3000 mm︱swing diameter over bed slide 520 mm︱centre height 380 mm︱reus 17 (7,5 - 1015) U/min︱tail stock MK6 ︱quill stroke 225 mm︱diameter of quill 105 mm︱spindle bore 132 mm︱feed längs 0,039 - 18 mm/min︱feed quer 0,02 - 9 mm/min︱total power requirement 15 kW︱weight of the machine ca. 4700 kg︱dimensions of the machine ca. 4900 x 1650 x 1650 mm︱
          - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE
            turning diameter 760 mm
            turning length 3000 mm
            swing diameter over bed slide 520 mm
            centre height 380 mm
            reus 17 (7,5 - 1015) U/min
            tail stock MK6
            quill stroke 225 mm
            diameter of quill 105 mm
            spindle bore 132 mm
            feed längs 0,039 - 18 mm/min
            feed quer 0,02 - 9 mm/min
            total power requirement 15 kW
            weight of the machine ca. 4700 kg
            dimensions of the machine ca. 4900 x 1650 x 1650 mm
            Description :
            - Coolant device
            - Machine light
            - Chip back wall
            - Spindle protection
            - Lathe chuck protection
            - Tool holder protection
            - Interchangeable gears

            *Special equipment
            - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON
            - MULTIFIX quick-change holder type B, including 4 tool holders
            - 3-axis digital display DRO Newall
            - Foot pedal with brake function CE


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BULMAK / ZMM CU400/1000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2200005 · lathe-conventional-electronic

          BULMAK / ZMM - CU400/1000 - - NEU -

          Technical details
          turning diameter 440 mm︱turning length 1000 mm︱swing diameter over bed slide 210 mm︱Swingdiameter in the bed bridge 620 mm︱centre height 210 mm︱reus 21 (20 - 2000) U/min︱tail stock MK5 ︱quill stroke 180 mm︱diameter of quill 70 mm︱spindle taper DIN 55027 Nr. 8 ︱spindle bore 62 mm︱feed längs 0,04 - 12 m/min︱feed quer 0,02 - 6 m/min︱total power requirement 7,5 kW︱weight of the machine ca. 2250 kg︱dimensions of the machine ca. 2450 x 980 x 1330 mm︱
          - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE
            turning diameter 440 mm
            turning length 1000 mm
            swing diameter over bed slide 210 mm
            Swingdiameter in the bed bridge 620 mm
            centre height 210 mm
            reus 21 (20 - 2000) U/min
            tail stock MK5
            quill stroke 180 mm
            diameter of quill 70 mm
            spindle taper DIN 55027 Nr. 8
            spindle bore 62 mm
            feed längs 0,04 - 12 m/min
            feed quer 0,02 - 6 m/min
            total power requirement 7,5 kW
            weight of the machine ca. 2250 kg
            dimensions of the machine ca. 2450 x 980 x 1330 mm
            Description :
            - Coolant device
            - Machine light
            - Chip back wall
            - Spindle protection
            - Lathe chuck protection
            - Tool holder protection
            - Interchangeable gears

            *Special equipment
            - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON
            - MULTIFIX quick-change holder type B, including 4 tool holders
            - 3-axis digital display DRO Newall
            - Foot pedal with brake function CE


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BULMAK / ZMM C10T


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2200006 · lathe-conventional-electronic

          BULMAK / ZMM - C10T - - NEU -

          Technical details
          turning diameter 660 mm︱turning length 1500 mm︱swing diameter over bed slide 420 mm︱Swingdiameter in the bed bridge 850 mm︱centre height 330 mm︱reus 15 (9 - 1320) U/min︱tail stock MK6 ︱quill stroke 225 mm︱diameter of quill 105 mm︱spindle bore 103 mm︱feed längs 0,039 - 18 m/min︱feed quer 0,02 - 9 m/min︱total power requirement 11 kW︱weight of the machine ca. 4170 kg︱dimensions of the machine ca. 2850 x 980 x 1330 mm︱
          - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE
            turning diameter 660 mm
            turning length 1500 mm
            swing diameter over bed slide 420 mm
            Swingdiameter in the bed bridge 850 mm
            centre height 330 mm
            reus 15 (9 - 1320) U/min
            tail stock MK6
            quill stroke 225 mm
            diameter of quill 105 mm
            spindle bore 103 mm
            feed längs 0,039 - 18 m/min
            feed quer 0,02 - 9 m/min
            total power requirement 11 kW
            weight of the machine ca. 4170 kg
            dimensions of the machine ca. 2850 x 980 x 1330 mm
            Description :
            - Coolant device
            - Machine light
            - Chip back wall
            - Spindle protection
            - Lathe chuck protection
            - Tool holder protection
            - Interchangeable gears

            *Special equipment
            - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON
            - MULTIFIX quick-change holder type B, including 4 tool holders
            - 3-axis digital display DRO Newall
            - Foot pedal with brake function CE


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic GILDEMEISTER MF 65


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06443 · lathe-conventional-electronic

          GILDEMEISTER - MF 65 - - 2x 1999 / 1x 2000 - 2x 840 D

          Technical details
          control 840 C ︱control 2x 840 DKühlmittelsystem ︱chip conveyor ja kW︱generator - rated current 95,00 A︱connected load 65,00 kW︱
            control 840 C
            control 2x 840 D
            Kühlmittelsystem
            chip conveyor ja kW
            generator - rated current 95,00 A
            connected load 65,00 kW


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO SMART 410-1000 V DIGITAL


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207347 · lathe-conventional-electronic

          BERNARDO - SMART 410-1000 V DIGITAL - - 2013 -

          Technical details
          turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52.0 mm︱turning speeds 30 - 3000 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 5.5 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2100 x 1200 x 1450 mm︱
          ** from a training workshop !! ** good condition - new price approx. 14.000 euros ** Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency converter and 3-axis position display - Hardened and ground gears and shafts, also in the feed gear - The speed and feed adjustment is simple - can be switched smoothly and precisely - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - The removable bridge - allows machining of large diameter workpieces Furnishing : - EASSON 3-axis digital display with LCD display - 1x 3-jaw steel chuck PO3-200 mm / D6 - 1x flat/clamping jaw chuck - 1x collet chuck including collets (inserts) - Fixed bezel - Passage diam. max. 135 mm - Revolving bezel - Passage diam. max. 65 mm - Foot pedal with braking function according to CE - MULTIFIX steel holder including insert - Protective device for steel holder - Revolver stop with fine adjustment (end stop) - electric frequency converter - Coolant device - Slip clutch - Machine light - Chip back wall - Machine swing feet - other accessories such as rotating center punch etc. - Operating instructions (DE) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207347
            turning length 1000 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52.0 mm
            turning speeds 30 - 3000 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 5.5 kW
            weight of the machine ca. 1550 kg.
            range L-W-H 2100 x 1200 x 1450 mm
            Description :
            ** from a training workshop !!
            ** good condition - new price approx. 14.000 euros
            ** Special price on request

            Characteristics :
            - Standard with delta frequency converter
            - for high torque in the lower speed range
            . and almost constant speed under load
            - Infinitely variable speed control
            - The set speed is read via a digital display
            - Prism bed made of gray cast iron, induction hardened and precision ground
            - Central, handy switching for feeds and threads
            - with lead and pull spindle
            - Modern main spindle bearing with precision angular contact ball bearings
            - Standard with frequency converter and 3-axis position display
            - Hardened and ground gears and shafts, also in the feed gear
            - The speed and feed adjustment is simple
            - can be switched smoothly and precisely
            - Sliding tailstock for taper turning
            - Handwheel with adjustable fine scaling (0.02 mm)
            - The removable bridge
            - allows machining of large diameter workpieces

            Furnishing :
            - EASSON 3-axis digital display with LCD display
            - 1x 3-jaw steel chuck PO3-200 mm / D6
            - 1x flat/clamping jaw chuck
            - 1x collet chuck including collets (inserts)
            - Fixed bezel - Passage diam. max. 135 mm
            - Revolving bezel - Passage diam. max. 65 mm
            - Foot pedal with braking function according to CE
            - MULTIFIX steel holder including insert
            - Protective device for steel holder
            - Revolver stop with fine adjustment (end stop)
            - electric frequency converter
            - Coolant device
            - Slip clutch
            - Machine light
            - Chip back wall
            - Machine swing feet
            - other accessories such as rotating center punch etc.
            - Operating instructions (DE)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207347


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO SMART 410-1000 V DIGITAL


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207348 · lathe-conventional-electronic

          BERNARDO - SMART 410-1000 V DIGITAL - - 2013 -

          Technical details
          turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52.0 mm︱turning speeds 30 - 3000 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 5.5 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2100 x 1200 x 1450 mm︱
          ** from a training workshop !! ** good condition - new price approx. 14.000 euros ** Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency converter and 3-axis position display - Hardened and ground gears and shafts, also in the feed gear - The speed and feed adjustment is simple - can be switched smoothly and precisely - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - The removable bridge - allows machining of large diameter workpieces Furnishing : - EASSON 3-axis digital display with LCD display - 1x 3-jaw steel chuck PO3-200 mm / D6 - 1x flat/clamping jaw chuck - Fixed bezel - Passage diam. max. 135 mm - Revolving bezel - Passage diam. max. 65 mm - Foot pedal with braking function according to CE - MULTIFIX steel holder including inserts - Protective device for steel holder - Revolver stop with fine adjustment (end stop) - electric frequency converter - Coolant device - Slip clutch - Machine light - Chip back wall - Machine swing feet - other accessories such as rotating center punch etc. - Operating instructions (DE) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207348 * Machinevideo : https://www.youtube.com/watch?v=I6HJZ_d3wIo
            turning length 1000 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52.0 mm
            turning speeds 30 - 3000 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 5.5 kW
            weight of the machine ca. 1550 kg.
            range L-W-H 2100 x 1200 x 1450 mm
            Description :
            ** from a training workshop !!
            ** good condition - new price approx. 14.000 euros
            ** Special price on request

            Characteristics :
            - Standard with delta frequency converter
            - for high torque in the lower speed range
            . and almost constant speed under load
            - Infinitely variable speed control
            - The set speed is read via a digital display
            - Prism bed made of gray cast iron, induction hardened and precision ground
            - Central, handy switching for feeds and threads
            - with lead and pull spindle
            - Modern main spindle bearing with precision angular contact ball bearings
            - Standard with frequency converter and 3-axis position display
            - Hardened and ground gears and shafts, also in the feed gear
            - The speed and feed adjustment is simple
            - can be switched smoothly and precisely
            - Sliding tailstock for taper turning
            - Handwheel with adjustable fine scaling (0.02 mm)
            - The removable bridge
            - allows machining of large diameter workpieces

            Furnishing :
            - EASSON 3-axis digital display with LCD display
            - 1x 3-jaw steel chuck PO3-200 mm / D6
            - 1x flat/clamping jaw chuck
            - Fixed bezel - Passage diam. max. 135 mm
            - Revolving bezel - Passage diam. max. 65 mm
            - Foot pedal with braking function according to CE
            - MULTIFIX steel holder including inserts
            - Protective device for steel holder
            - Revolver stop with fine adjustment (end stop)
            - electric frequency converter
            - Coolant device
            - Slip clutch
            - Machine light
            - Chip back wall
            - Machine swing feet
            - other accessories such as rotating center punch etc.
            - Operating instructions (DE)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207348

            * Machinevideo :
            https://www.youtube.com/watch?v=I6HJZ_d3wIo


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic BERNARDO SMART 410-1000 V DIGITAL


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9207349 · lathe-conventional-electronic

          BERNARDO - SMART 410-1000 V DIGITAL - - 2013 -

          Technical details
          turning length 1000 mm︱turning diameter 410 mm︱swing diameter over bed slide 255 mm︱turning dia. in gap 580 mm︱spindle bore 52.0 mm︱turning speeds 30 - 3000 U/min︱bed width 250 mm︱spindle taper 55029 D 1-6︱taper in tailstock 4 MK︱quill travel 120 mm︱total power requirement 5.5 kW︱weight of the machine ca. 1550 kg.︱range L-W-H 2100 x 1200 x 1450 mm︱
          ** from a training workshop !! ** good condition - new price approx. 14.000 euros ** Special price on request Characteristics : - Standard with delta frequency converter - for high torque in the lower speed range . and almost constant speed under load - Infinitely variable speed control - The set speed is read via a digital display - Prism bed made of gray cast iron, induction hardened and precision ground - Central, handy switching for feeds and threads - with lead and pull spindle - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency converter and 3-axis position display - Hardened and ground gears and shafts, also in the feed gear - The speed and feed adjustment is simple - can be switched smoothly and precisely - Sliding tailstock for taper turning - Handwheel with adjustable fine scaling (0.02 mm) - The removable bridge - allows machining of large diameter workpieces Furnishing : - EASSON 3-axis digital display with LCD display - 1x 3-jaw steel chuck PO3-200 mm / D6 - 1x flat/clamping jaw chuck - 1x collet chuck including collets (inserts) - Fixed bezel - Passage diam. max. 135 mm - Revolving bezel - Passage diam. max. 65 mm - Foot pedal with braking function according to CE - MULTIFIX steel holder including insert - Protective device for steel holder - Revolver stop with fine adjustment (end stop) - electric frequency converter - Coolant device - Slip clutch - Machine light - Chip back wall - Machine swing feet - other accessories such as rotating center punch etc. - Operating instructions (DE) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207349
            turning length 1000 mm
            turning diameter 410 mm
            swing diameter over bed slide 255 mm
            turning dia. in gap 580 mm
            spindle bore 52.0 mm
            turning speeds 30 - 3000 U/min
            bed width 250 mm
            spindle taper 55029 D 1-6
            taper in tailstock 4 MK
            quill travel 120 mm
            total power requirement 5.5 kW
            weight of the machine ca. 1550 kg.
            range L-W-H 2100 x 1200 x 1450 mm
            Description :
            ** from a training workshop !!
            ** good condition - new price approx. 14.000 euros
            ** Special price on request

            Characteristics :
            - Standard with delta frequency converter
            - for high torque in the lower speed range
            . and almost constant speed under load
            - Infinitely variable speed control
            - The set speed is read via a digital display
            - Prism bed made of gray cast iron, induction hardened and precision ground
            - Central, handy switching for feeds and threads
            - with lead and pull spindle
            - Modern main spindle bearing with precision angular contact ball bearings
            - Standard with frequency converter and 3-axis position display
            - Hardened and ground gears and shafts, also in the feed gear
            - The speed and feed adjustment is simple
            - can be switched smoothly and precisely
            - Sliding tailstock for taper turning
            - Handwheel with adjustable fine scaling (0.02 mm)
            - The removable bridge
            - allows machining of large diameter workpieces

            Furnishing :
            - EASSON 3-axis digital display with LCD display
            - 1x 3-jaw steel chuck PO3-200 mm / D6
            - 1x flat/clamping jaw chuck
            - 1x collet chuck including collets (inserts)
            - Fixed bezel - Passage diam. max. 135 mm
            - Revolving bezel - Passage diam. max. 65 mm
            - Foot pedal with braking function according to CE
            - MULTIFIX steel holder including insert
            - Protective device for steel holder
            - Revolver stop with fine adjustment (end stop)
            - electric frequency converter
            - Coolant device
            - Slip clutch
            - Machine light
            - Chip back wall
            - Machine swing feet
            - other accessories such as rotating center punch etc.
            - Operating instructions (DE)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9207349


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          TOP Manufacturer:

          HBM - KAMI - ELMAG - SCHAUBLIN -