,

Bitte einen Suchbegriff eingeben - Unesite pojam za pretraživanje
Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:

          CNC Turning- and Milling Center

          Machinelist: CNC Turning- and Milling Center


          CNC Turning- and Milling Center

          used Lathes CNC Turning- and Milling Center GILDEMEISTER CTX beta 500


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03812 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX beta 500 - - 2014 - 840 D SL SIEMENS

          Technical details
          turning diameter 410 mm︱turning length 850 mm︱control 840 D SL SIEMENS︱greates pass round over bed 500 mm︱Main spindle: ︱turning speed range - main spindle 25 - 5.000 min/-1︱power capacity - main spindel 25 / 34 kW︱max. Torque 280 Nm︱C-Axis 0,01 °︱spindle nose 170 h5 ︱max. chucking diameter 210 mm︱chucking diameter 250 mm︱spindle diameter in front bearing 130 mm︱spindle bore 87 mm︱max. bar capacity 77 mm︱turret: ︱number of toolpositions 16 pos.︱Number of driven toolspositions 16 pos.︱power capacity driven tool-stations 11,3 kW︱Spindle speed - driven tool stations max. 4.000 min -1︱
          CNC - Turning- and Millingcenter GILDEMEISTER - CTX beta 500 - Operating-Hours: Spindle-Runtime: ca.100h NEW SPINDEL -INTER FACE FOR Bar-Feede - C-Axis - Y-Axis CHIP CONVOYER CHUCK DIA 210 MM
            turning diameter 410 mm
            turning length 850 mm
            control 840 D SL SIEMENS
            greates pass round over bed 500 mm
            turning speed range - main spind. 25 - 5.000 min/-1
            power capacity - main spindel 25 / 34 kW
            max. Torque 280 Nm
            C-Axis 0,01 °
            spindle nose 170 h5
            max. chucking diameter 210 mm
            chucking diameter 250 mm
            spindle diameter in front bearin. 130 mm
            spindle bore 87 mm
            max. bar capacity 77 mm
            number of toolpositions 16 pos.
            Number of driven toolspositions 16 pos.
            power capacity driven tool-stati. 11,3 kW
            Spindle speed - driven tool stat. max. 4.000 min -1
            Description :
            CNC - Turning- and Millingcenter
            GILDEMEISTER - CTX beta 500

            - Operating-Hours: Spindle-Runtime: ca.100h NEW SPINDEL
            -INTER FACE FOR Bar-Feede
            - C-Axis
            - Y-Axis
            CHIP CONVOYER
            CHUCK DIA 210 MM





        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER CTX Beta 800


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2323 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX Beta 800 - - 2012 - Siemens 840 D

          Technical details
          turning diameter 250 mm︱turning length 800 mm︱control Siemens 840 D ︱total power requirement kW︱weight of the machine ca. 6130 kg︱dimensions of the machine ca. m︱
          CNC turning and milling center in good condition with driven tools, C and Y axis, subspindle and CNC control Siemens 840 D. Operating hours according to the attached photo from February 8, 2024 The hours may increase as the machine is currently still in use. Max. workpiece diameter 410 mm Max. workpiece length 800 mm Max. travel X-axis 300 mm Max. travel Y-axis +/- 50 mm Max. travel Z-axis 850 mm Turning diameter over cross slide 250 mm Main spindle drive power 65 kW Spindle bore 75 mm Spindle speed of the main spindle 4000 rpm. Spindle speed of the counter spindle 5000 rpm. Equipment and accessories: Chip conveyor Coolant system with paper belt filter Oil mist extraction system Electrical control cabinet with air conditioning (tropical package) 3-jaw power chuck on main and subspindle Basic equipment of tool holders Documentation/Manual
            turning diameter 250 mm
            turning length 800 mm
            control Siemens 840 D
            weight of the machine ca. 6130 kg
            Description :
            CNC turning and milling center in good condition with driven tools,
            C and Y axis, subspindle and CNC control Siemens 840 D.

            Operating hours according to the attached photo from February 8, 2024
            The hours may increase as the machine is currently still
            in use.

            Max. workpiece diameter 410 mm
            Max. workpiece length 800 mm
            Max. travel X-axis 300 mm
            Max. travel Y-axis +/- 50 mm
            Max. travel Z-axis 850 mm
            Turning diameter over cross slide 250 mm
            Main spindle drive power 65 kW
            Spindle bore 75 mm
            Spindle speed of the main spindle 4000 rpm.
            Spindle speed of the counter spindle 5000 rpm.

            Equipment and accessories:
            Chip conveyor
            Coolant system with paper belt filter
            Oil mist extraction system
            Electrical control cabinet with air conditioning (tropical package)
            3-jaw power chuck on main and subspindle
            Basic equipment of tool holders
            Documentation/Manual


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER CTX 800 Beta V6


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-51910 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 800 Beta V6 - - 2009 - Heidenhain ERGOline

          Technical details
          turning diameter 410 mm︱turning length 800 mm︱greates pass round over bed 700 mm︱control Heidenhain ERGOline ︱spindle passage Ø 65 Teilhohlspannung mm︱spindle speed: 25- 5000 U/min︱spindle motor 25 kW︱max. torque on the spindle 280 Nm︱no. of tools in turret 1 12 VDI 40︱driven stations 12 VDI 40︱speed of driven tools 4000 U/min︱drive milling spindle 5,6/ 11,3 kW︱y-axis +/- 60 mm︱sup spindle 15 kW︱Spindlespeed subspindle 20- 6000 U/min︱rapid traverse 30/22,5/30 m/min︱tail stock Gegenspindle/Subspindle ︱range L-W-H 4,7 x 2,7 x 2,0 mm︱weight of the machine ca. 6,5 t︱
          CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck SMW 315 BH main spindle - 3 jaw chuck SMW 250 BH sub spindle - chipconveyor - oil mist collector LTA - automatic door - coolant pistol - partly hollow spindle Ø 65 x 840 mm
            turning diameter 410 mm
            turning length 800 mm
            greates pass round over bed 700 mm
            control Heidenhain ERGOline
            spindle passage Ø 65 Teilhohlspannung mm
            spindle speed: 25- 5000 U/min
            spindle motor 25 kW
            max. torque on the spindle 280 Nm
            no. of tools in turret 1 12 VDI 40
            driven stations 12 VDI 40
            speed of driven tools 4000 U/min
            drive milling spindle 5,6/ 11,3 kW
            y-axis +/- 60 mm
            sup spindle 15 kW
            Spindlespeed subspindle 20- 6000 U/min
            rapid traverse 30/22,5/30 m/min
            tail stock Gegenspindle/Subspindle
            range L-W-H 4,7 x 2,7 x 2,0 mm
            weight of the machine ca. 6,5 t
            Description :
            CNC lathe with driven tools, Y- axis and sub spindle

            - 3 jaw chuck SMW 315 BH main spindle
            - 3 jaw chuck SMW 250 BH sub spindle
            - chipconveyor
            - oil mist collector LTA
            - automatic door
            - coolant pistol
            - partly hollow spindle Ø 65 x 840 mm


        • Klaus Rosenboom GmbH
        • Oppenheimer Str. 19
        • 28307 Bremen

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER CTX 410 V3


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9179 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 410 V3 - - 2009 - CNC Pilot 4290 Heidenhain

          Technical details
          turning length 600 mm︱max. turning diameter 320 mm︱swing diameter above cross guideway 365 mm︱control CNC Pilot 4290 Heidenhain︱Main spindle: ︱turning speed range - main spindle max. 5.000 min/-1︱power capacity - main spindel 28 / 21 kW︱max. Torque 320 / 240 Nm︱spindle nose 170h5 ︱chucking diameter 215 mm︱spindle diameter in front bearing 130 mm︱spindle bore 87 mm︱max. bar capacity 65 mm︱c-axis ︱turret: ︱number of toolpositions 12 pos.︱tool taper VDI 30 ︱Driven Tool Stations: ︱Number of driven toolspositions 12 pos.︱tool spindle speed range max. 4.500 min/-1︱
          CNC Turning- and Milling Center Gildemeister - CTX 410 V3 - driven tool-stations - ca. 7.900h spindle-hrs.
            turning length 600 mm
            max. turning diameter 320 mm
            swing diameter above cross guide. 365 mm
            control CNC Pilot 4290 Heidenhain
            turning speed range - main spind. max. 5.000 min/-1
            power capacity - main spindel 28 / 21 kW
            max. Torque 320 / 240 Nm
            spindle nose 170h5
            chucking diameter 215 mm
            spindle diameter in front bearin. 130 mm
            spindle bore 87 mm
            max. bar capacity 65 mm
            number of toolpositions 12 pos.
            tool taper VDI 30
            Number of driven toolspositions 12 pos.
            tool spindle speed range max. 4.500 min/-1
            Description :
            CNC Turning- and Milling Center
            Gildemeister - CTX 410 V3

            - driven tool-stations
            - ca. 7.900h spindle-hrs.


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER CTX 310 V3


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9047 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 310 V3 - - 2007 - 32 i S Fanuc

          Technical details
          turning diameter max. 320 mm︱turning length 450 mm︱control 32 i S Fanuc︱centre height 190 mm︱turning diameter over bed 320 mm︱turning dia. over face-slide 260 mm︱Main spindle: ︱turning speed range - main spindle max. 5.000 min/-1︱power capacity - main spindel 11 / 7,5 kW︱max. Torque 115 / 86 Nm︱usable bar diameter max. ( 52 ) mm︱spindle bore 68,5 mm︱spindle diameter in front bearing 100 mm︱C-Axis 360 x 0,01 °︱axis stroke: ︱travel -x axis 160 mm︱travel -z axis 450 mm︱turret: ︱number of toolpositions 12 pos.︱tool taper VDI 30
          CNC - Turning- and Millingcenter GILDEMEISTER - CTX 310 V3 - C-Axis - ToolDrive - Tailstock - Operating-Hours: Power-On: ca. 11.000h / Spindle-Run: ca. 3.200h
            turning diameter max. 320 mm
            turning length 450 mm
            control 32 i S Fanuc
            centre height 190 mm
            turning diameter over bed 320 mm
            turning dia. over face-slide 260 mm
            turning speed range - main spind. max. 5.000 min/-1
            power capacity - main spindel 11 / 7,5 kW
            max. Torque 115 / 86 Nm
            usable bar diameter max. ( 52 ) mm
            spindle bore 68,5 mm
            spindle diameter in front bearin. 100 mm
            C-Axis 360 x 0,01 °
            travel -x axis 160 mm
            travel -z axis 450 mm
            number of toolpositions 12 pos.
            tool taper VDI 30
            Description :
            CNC - Turning- and Millingcenter
            GILDEMEISTER - CTX 310 V3

            - C-Axis
            - ToolDrive
            - Tailstock
            - Operating-Hours: Power-On: ca. 11.000h / Spindle-Run: ca. 3.200h


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER Sprint 42-8 linear


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8885 · CNC Turning- and Milling Center

          GILDEMEISTER - Sprint 42-8 linear - - 2006 - 160i-TB Fanuc

          Technical details
          turning diameter max. 42 mm︱turning length ca. 120 mm︱control 160i-TB Fanuc︱Main spindle: ︱max. usable bar diameter 42 mm︱Max. speed main spindle 6.500 min/-1︱power capacity - main spindel 7,5 / 5,5 kW︱C-Axis 0,001 °︱Subspindle: ︱max. usable bar diameter 42 mm︱Max. Speed Subspindle 6.500 min/-1︱power capacity - Sub spindle 7,5 / 5,5 kW︱C-Axis 0,001 °︱slide I: ︱x-axis 65 mm︱y-axis 350 mm︱z-axis 120 mm︱rapid traverse 30 m/min︱Accelaration 5/10 m/s²︱feed power max. 350 daN︱
          CNC-Turning- and Millingcenter GILDEMEISTER - Sprint 42-8 linear - 8-Axis (6 linear- and 2 C-Axis) - incl. Bar-Feeder
            turning diameter max. 42 mm
            turning length ca. 120 mm
            control 160i-TB Fanuc
            max. usable bar diameter 42 mm
            Max. speed main spindle 6.500 min/-1
            power capacity - main spindel 7,5 / 5,5 kW
            C-Axis 0,001 °
            max. usable bar diameter 42 mm
            Max. Speed Subspindle 6.500 min/-1
            power capacity - Sub spindle 7,5 / 5,5 kW
            C-Axis 0,001 °
            x-axis 65 mm
            y-axis 350 mm
            z-axis 120 mm
            rapid traverse 30 m/min
            Accelaration 5/10 m/s²
            feed power max. 350 daN
            Description :
            CNC-Turning- and Millingcenter
            GILDEMEISTER - Sprint 42-8 linear

            - 8-Axis (6 linear- and 2 C-Axis)
            - incl. Bar-Feeder


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER CTX 320 linear V5


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8342 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 320 linear V5 - - 2005 - 180i TB MG Fanuc

          Technical details
          turning diameter max. 400 mm︱turning length 600 mm︱control 180i TB MG Fanuc︱greates pass round over bed 500 mm︱Swing dia. over traverse guideway 300 mm︱centre distance 615 mm︱Main spindle: ︱turning speed range - main spindle 20 - 6.000 min/-1︱power capacity - main spindel 16 kW︱max. Torque 155 Nm︱spindle diameter in front bearing 100 mm︱spindle bore 68,5 mm︱max. bar capacity 52 mm︱usable bar diameter 52 mm︱spindle nose 140H5 ︱max. chucking diameter 200 mm︱C-Axis 0,001 °︱Subspindel: ︱Spindle speed range subspindle 20 - 6.000 min/-1︱power capacity - Sub spindle 7,5 kW︱
          CNC - Turning- and MillingCenter GILDEMEISTER - CTX 320 linear V5 - Main- and Subspindle - tool-drive - C-Axis - Manual Guide - Irco Breuning Profimat - WITHOUT tools
            turning diameter max. 400 mm
            turning length 600 mm
            control 180i TB MG Fanuc
            greates pass round over bed 500 mm
            Swing dia. over traverse guidewa. 300 mm
            centre distance 615 mm
            turning speed range - main spind. 20 - 6.000 min/-1
            power capacity - main spindel 16 kW
            max. Torque 155 Nm
            spindle diameter in front bearin. 100 mm
            spindle bore 68,5 mm
            max. bar capacity 52 mm
            usable bar diameter 52 mm
            spindle nose 140H5
            max. chucking diameter 200 mm
            C-Axis 0,001 °
            Spindle speed range subspindle 20 - 6.000 min/-1
            power capacity - Sub spindle 7,5 kW
            Description :
            CNC - Turning- and MillingCenter
            GILDEMEISTER - CTX 320 linear V5

            - Main- and Subspindle
            - tool-drive
            - C-Axis
            - Manual Guide
            - Irco Breuning Profimat
            - WITHOUT tools



        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER CTX 420 linear/CNC-Heidenhain


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20344 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 420 linear/CNC-Heidenhain - - 2004 - Data Pilot 4290 HEIDENHAIN

          Technical details
          turning diameter 324 mm︱turning length 600 mm︱control Data Pilot 4290 HEIDENHAIN︱bar diameter 65 mm︱swing diameter 680 mm︱travel -x axis 260 mm︱travel -z axis 635 mm︱spindle speed: 5000 1/min︱spindle bore 79 mm︱C-Axis 0,025 °︱turret head 12 Pos. / VDI 40︱Driven Tools 12 Pos. 4.500 U/min︱rapid traverse X-axis 60 m/min︱rapid traverse Z-axis 45 m/min︱taper in tailstock-quill MK 5 ︱tailstock travel 580 mm︱drive capacity - spindle motor 25 kW︱voltage 400 V︱total power requirement 50 kVA︱weight of the machine ca. 6,0 t︱
          - Serial-No.: 02260003251 - Machine ON: 19.039 h - Programm ON: 2.676 h - control: HEIDENHAIN Data Pilot 4290 - New main spindle bearings - Z-Axis ball screw reconditioned incl. new bearings - electronic hand wheel - C-Axis / driven tools - chip conveyor - coolant equipment - machine lamp
            turning diameter 324 mm
            turning length 600 mm
            control Data Pilot 4290 HEIDENHAIN
            bar diameter 65 mm
            swing diameter 680 mm
            travel -x axis 260 mm
            travel -z axis 635 mm
            spindle speed: 5000 1/min
            spindle bore 79 mm
            C-Axis 0,025 °
            turret head 12 Pos. / VDI 40
            Driven Tools 12 Pos. 4.500 U/min
            rapid traverse X-axis 60 m/min
            rapid traverse Z-axis 45 m/min
            taper in tailstock-quill MK 5
            tailstock travel 580 mm
            drive capacity - spindle motor 25 kW
            voltage 400 V
            total power requirement 50 kVA
            weight of the machine ca. 6,0 t
            Description :
            - Serial-No.: 02260003251
            - Machine ON: 19.039 h
            - Programm ON: 2.676 h
            - control: HEIDENHAIN Data Pilot 4290
            - New main spindle bearings
            - Z-Axis ball screw reconditioned incl. new bearings
            - electronic hand wheel
            - C-Axis / driven tools
            - chip conveyor
            - coolant equipment
            - machine lamp


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER CTX 410 V3


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9178 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 410 V3 - - 2004 - Heidenhain Plus iT

          Technical details
          max. turning diameter 505 mm︱turning length ca. 600 mm︱swing diameter above cross guideway 375 mm︱control Heidenhain Plus iT ︱Main spindle: ︱turning speed range - main spindle 25 - 5.000 min/-1︱power capacity - main spindel 28 / 21 kW︱max. Torque 320 / 240 Nm︱spindle nose 170h5 ︱chucking diameter 210 / (max. 305) mm︱spindle diameter in front bearing 130 mm︱spindle bore 87 mm︱max. usable bar diameter 65 mm︱c-axis 360° ︱turret: ︱number of toolpositions 12 pos.︱tool taper VDI 30 DIN 69880︱Driven Tool Stations: ︱Number of driven toolspositions 12 pos.︱tool spindle speed range max. 4.000 min/-1︱
          CNC Turning- and Milling Center Gildemeister - CTX 410 V3 - ToolDrive - C-Axis - BarFeeder
            max. turning diameter 505 mm
            turning length ca. 600 mm
            swing diameter above cross guide. 375 mm
            control Heidenhain Plus iT
            turning speed range - main spind. 25 - 5.000 min/-1
            power capacity - main spindel 28 / 21 kW
            max. Torque 320 / 240 Nm
            spindle nose 170h5
            chucking diameter 210 / (max. 305) mm
            spindle diameter in front bearin. 130 mm
            spindle bore 87 mm
            max. usable bar diameter 65 mm
            c-axis 360°
            number of toolpositions 12 pos.
            tool taper VDI 30 DIN 69880
            Number of driven toolspositions 12 pos.
            tool spindle speed range max. 4.000 min/-1
            Description :
            CNC Turning- and Milling Center
            Gildemeister - CTX 410 V3

            - ToolDrive
            - C-Axis
            - BarFeeder




        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER GMX 300 linear


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2284 · CNC Turning- and Milling Center

          GILDEMEISTER - GMX 300 linear - - 2004 - SIEMENS 840 D

          Technical details
          turning diameter 640 mm︱turning length 1585 mm︱control SIEMENS 840 D ︱swing diameter 640 mm︱spindle distance 1930 mm︱slide I - cross travel (X1) 550 mm︱slide I - longitudial travel (Z1) 1585 mm︱y-travel (Y1) 220 mm︱b-axis (B1) 240° deg.︱slide II - cross travel (X2) 225 mm︱slide II - longitudial travel (Z2) 1400 mm︱Travel subspindle (Z3) 1500 mm︱spindle bore 79 mm︱main spindle speeds: 5000 1/min.︱Subspindle spindle speeds 5000 1/min.︱main drive motor (40/100% ED) 35/25 kW︱rapid traverse (X1/Y/Z1) 40/24/70 m/min︱rapid traverse (X2/Z2) 24/40 m/min︱milling head speed 12000 U/min︱milling spindle drive (40/100% ED) 22/13,2 kW︱
          First put into operation February 2005 Working hours February 2024: - Machine on: 64.333 h - Program-cycle: 41.420 h - Spindle-hours: 32.272 h * Main and subspindle, 2 x C-axis * 3-jaw power chuck RÖHM KFD-HS 250/3 for mainspindle * 3-jaw power chuck RÖHM KFD-HS 250/3 for subspindle * CNC control SIEMENS Sinumerik 840 D powerline * Turning and milling unit (HSK-A63), B-axis, Y-axis * 120-station tool changer * 12-position turret (bottom), all positions driven (10.7 kW, 4000 rpm) * Cooling unit * Coolant filter system 980 L * Chip conveyor * Oilmist extractor Optionally, a short bar loader, make Breuning ILS, passage 90 mm can be offered for € 5.500,-
            turning diameter 640 mm
            turning length 1585 mm
            control SIEMENS 840 D
            swing diameter 640 mm
            spindle distance 1930 mm
            slide I - cross travel (X1) 550 mm
            slide I - longitudial travel (Z1) 1585 mm
            y-travel (Y1) 220 mm
            b-axis (B1) 240° deg.
            slide II - cross travel (X2) 225 mm
            slide II - longitudial travel (Z2) 1400 mm
            Travel subspindle (Z3) 1500 mm
            spindle bore 79 mm
            main spindle speeds: 5000 1/min.
            Subspindle spindle speeds 5000 1/min.
            main drive motor (40/100% ED) 35/25 kW
            rapid traverse (X1/Y/Z1) 40/24/70 m/min
            rapid traverse (X2/Z2) 24/40 m/min
            milling head speed 12000 U/min
            milling spindle drive (40/100% ED) 22/13,2 kW
            Description :
            First put into operation February 2005

            Working hours February 2024:
            - Machine on: 64.333 h
            - Program-cycle: 41.420 h
            - Spindle-hours: 32.272 h

            * Main and subspindle, 2 x C-axis
            * 3-jaw power chuck RÖHM KFD-HS 250/3 for mainspindle
            * 3-jaw power chuck RÖHM KFD-HS 250/3 for subspindle
            * CNC control SIEMENS Sinumerik 840 D powerline
            * Turning and milling unit (HSK-A63), B-axis, Y-axis
            * 120-station tool changer
            * 12-position turret (bottom), all positions driven (10.7 kW, 4000 rpm)
            * Cooling unit
            * Coolant filter system 980 L
            * Chip conveyor
            * Oilmist extractor

            Optionally, a short bar loader, make Breuning ILS, passage 90 mm
            can be offered for € 5.500,-


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER CTX 420 linear V3 - Siem. 840D


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20346 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 420 linear V3 - Siem. 840D - - 2003 - SINUMERIK 840D ShopTurn

          Technical details
          turning diameter 324 mm︱turning length 600 mm︱control SINUMERIK 840D ShopTurn︱swing diameter 680 mm︱bar diameter 65 mm︱travel -x axis 260 mm︱travel -z axis 635 mm︱spindle speed: 5000 1/min︱spindle bore 79 mm︱C-Axis 0,025 °︱turret head 12 Pos. / VDI 40︱Driven Tools 12 Pos. 4.500 U/min︱rapid traverse X-axis 60 m/min︱rapid traverse Z-axis 45 m/min︱taper in tailstock-quill MK 5 ︱tailstock travel 580 mm︱drive capacity - spindle motor 25 kW︱voltage 400 V︱total power requirement 50 kVA︱weight of the machine ca. 6,0 t︱
          - Serial-No.: 02260001561 - Machine ON: 64.692 h - Programm ON: 18.296 h - control: SIEMENS 840D ShopTurn - electronic hand wheel - C-Axis / driven tools - Spindle bearings NEW - Ball screw Z-Axis incl. bearings NEW - chip conveyor - coolant equipment - machine lamp
            turning diameter 324 mm
            turning length 600 mm
            control SINUMERIK 840D ShopTurn
            swing diameter 680 mm
            bar diameter 65 mm
            travel -x axis 260 mm
            travel -z axis 635 mm
            spindle speed: 5000 1/min
            spindle bore 79 mm
            C-Axis 0,025 °
            turret head 12 Pos. / VDI 40
            Driven Tools 12 Pos. 4.500 U/min
            rapid traverse X-axis 60 m/min
            rapid traverse Z-axis 45 m/min
            taper in tailstock-quill MK 5
            tailstock travel 580 mm
            drive capacity - spindle motor 25 kW
            voltage 400 V
            total power requirement 50 kVA
            weight of the machine ca. 6,0 t
            Description :
            - Serial-No.: 02260001561
            - Machine ON: 64.692 h
            - Programm ON: 18.296 h
            - control: SIEMENS 840D ShopTurn
            - electronic hand wheel
            - C-Axis / driven tools
            - Spindle bearings NEW
            - Ball screw Z-Axis incl. bearings NEW
            - chip conveyor
            - coolant equipment
            - machine lamp


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER CTX 310 V3


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9126 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 310 V3 - - 2003 - 840 D Siemens

          Technical details
          turning diameter 210 mm︱turning length 580 mm︱control 840 D Siemens︱centre height 190 mm︱turning diameter over bed 330 mm︱turning dia. over face-slide 260 mm︱Main spindle: ︱turning speed range - main spindle max. 4.000 min/-1︱power capacity - main spindel 10 / 7,5 kW︱max. Torque 115 / 86 Nm︱spindle bore 68,5 mm︱max. usable bar diameter 51 mm︱C - Axis 0,001 °︱axis stroke: ︱travel -x axis 185 mm︱travel -z axis 455 mm︱turret: ︱number of toolpositions 12 pos.︱tool taper VDI 30 ︱Driven Tool Stations: 6 pos.︱
          CNC Turning- and Milling Center GILDEMEISTER - CTX 310 V3 - incl. bar loading magazine IRCO Breuning - incl. 2x collet chucks - incl. 2x jaw chuck including various clamping jaws - various VDI30 rotary holders - various reducing tubes - approx. 20x collets 173E - Pressure sleeve for collets 185E (for bars up to Ø50) - 11x collets 185E
            turning diameter 210 mm
            turning length 580 mm
            control 840 D Siemens
            centre height 190 mm
            turning diameter over bed 330 mm
            turning dia. over face-slide 260 mm
            turning speed range - main spind. max. 4.000 min/-1
            power capacity - main spindel 10 / 7,5 kW
            max. Torque 115 / 86 Nm
            spindle bore 68,5 mm
            max. usable bar diameter 51 mm
            C - Axis 0,001 °
            travel -x axis 185 mm
            travel -z axis 455 mm
            number of toolpositions 12 pos.
            tool taper VDI 30
            Driven Tool Stations: 6 pos.
            Description :
            CNC Turning- and Milling Center
            GILDEMEISTER - CTX 310 V3

            - incl. bar loading magazine IRCO Breuning
            - incl. 2x collet chucks
            - incl. 2x jaw chuck including various clamping jaws
            - various VDI30 rotary holders
            - various reducing tubes
            - approx. 20x collets 173E
            - Pressure sleeve for collets 185E (for bars up to Ø50)
            - 11x collets 185E



        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER Twin 42-II


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4699 · CNC Turning- and Milling Center

          GILDEMEISTER - Twin 42-II - - 2003 - SIEMENS 840D Powerline

          Technical details
          turning diameter 200 mm︱turning length 635 mm︱control SIEMENS 840D Powerline ︱greates pass round over bed 250 mm︱spindle turning speed range 20-7000 U/min︱turret head 2x 12 ︱weight of the machine ca. 10 t︱
          Y- & B- axes Misc. accessories more details on www.marcels-maschinen.ch
            turning diameter 200 mm
            turning length 635 mm
            control SIEMENS 840D Powerline
            greates pass round over bed 250 mm
            spindle turning speed range 20-7000 U/min
            turret head 2x 12
            weight of the machine ca. 10 t
            Description :
            Y- & B- axes
            Misc. accessories

            more details on www.marcels-maschinen.ch


        • Marcels Maschinen AG
        • Anthoptstrasse 11
        • 8222 Beringen (Schaffhausen)
        • Schweiz

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER CTX 310


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-7020 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 310 - - 2002 - SIEMENS Sinumerik

          Technical details
          turning diameter 250 mm︱turning length 450 mm︱control SIEMENS Sinumerik ︱number of turret 12 pos︱number of driven tools 6 Stück︱turning speed range 0-5000 U/min︱max. torque 1250 Nm︱total power requirement 21 kW︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 3,7 x 1,5 x 1,7 m︱
          Kitagawa 3 - Jaw chuck 250 mm Tailstock Parts catcher Chip conveyor Switch-on hours: 27374 h Spindle hours: 157858 h
            turning diameter 250 mm
            turning length 450 mm
            control SIEMENS Sinumerik
            number of turret 12 pos
            number of driven tools 6 Stück
            turning speed range 0-5000 U/min
            max. torque 1250 Nm
            total power requirement 21 kW
            weight of the machine ca. 3,2 t
            dimensions of the machine ca. 3,7 x 1,5 x 1,7 m
            Description :
            Kitagawa 3 - Jaw chuck 250 mm
            Tailstock
            Parts catcher
            Chip conveyor
            Switch-on hours: 27374 h
            Spindle hours: 157858 h



        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER TWIN 42


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2288 · CNC Turning- and Milling Center

          GILDEMEISTER - TWIN 42 - - 2002 - Siemens 840 D Powerline

          Technical details
          turning diameter 100 mm︱turning length 210 mm︱control Siemens 840 D Powerline ︱tool taper VDI 25 ︱swing diameter 145 mm︱bar material dia. 42 mm︱centre distance 580 mm︱slide I - cross travel (X1) 220 mm︱slide I - longitudial travel (Z1) 320 mm︱y-axis (Y1) +/- 30 mm︱rapid travel x/y/z 30/15/30 m/min︱slide II - cross travel (X2) 120 mm︱slide II - longitudial travel (Z2) 345 mm︱rapid traverse x + z axis 30/30 m/min︱Subspindle: Ja / yes ︱longitudinal travel (Z3) 380 mm︱vertical stroke (X3) 145 mm︱rapid traverse x + z axis 20/30 m/min︱main spindle speeds: 35 - 7000 U/min.︱Subspindle spindle speeds 35 - 7000 U/min.︱
          Equipment: CNC control Siemens 840 D Powerline. 2 x 12-station turret, all positions driven (speed 30-6000 rpm., 3,8/2,1 kW) Y axis Collection device with gripper Belt filter system Bar feeder, make Breuning/IRCO, model ILS TBL 72.12, bar length 1200 mm Counter spindle from RUN-TEC, completely overhauled Additional tailstock under the counter spindle Chip conveyor
            turning diameter 100 mm
            turning length 210 mm
            control Siemens 840 D Powerline
            tool taper VDI 25
            swing diameter 145 mm
            bar material dia. 42 mm
            centre distance 580 mm
            slide I - cross travel (X1) 220 mm
            slide I - longitudial travel (Z1) 320 mm
            y-axis (Y1) +/- 30 mm
            rapid travel x/y/z 30/15/30 m/min
            slide II - cross travel (X2) 120 mm
            slide II - longitudial travel (Z2) 345 mm
            rapid traverse x + z axis 30/30 m/min
            Subspindle: Ja / yes
            longitudinal travel (Z3) 380 mm
            vertical stroke (X3) 145 mm
            rapid traverse x + z axis 20/30 m/min
            main spindle speeds: 35 - 7000 U/min.
            Subspindle spindle speeds 35 - 7000 U/min.
            Description :
            Equipment:
            CNC control Siemens 840 D Powerline.
            2 x 12-station turret, all positions driven (speed 30-6000 rpm.,
            3,8/2,1 kW)
            Y axis
            Collection device with gripper
            Belt filter system
            Bar feeder, make Breuning/IRCO, model ILS TBL 72.12, bar length 1200 mm
            Counter spindle from RUN-TEC, completely overhauled
            Additional tailstock under the counter spindle
            Chip conveyor


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          A CNC Turning and Milling Center from LagerMaschinen
          A CNC turning and milling center from LagerMaschinen - good for business

          A CNC turning and milling center from LagerMaschinen will certainly be a great advantage to your small or medium-sized business. Choose from a CNC turning and milling center that fits your needs exactly. A CNC turning and milling center uses either one of multiple axes to calibrate and work wood metal or other hard materials. When purchasing a CNC turning and milling center from LagerMaschinen you'll be able to ensure quality control as well as to speak directly with sellers. Let LagerMaschinen's qualified experts assist you in your search for your next business machine.

          CNC turning and milling center from LagerMaschinen

          A CNC turning and milling center (also known as a lathe) can be used for many different purposes. No matter what your end product a CNC turning and milling center from LagerMaschinen is just what you need. Used machines are more economically viable as well as kinder to the environment. A CNC turning and milling center from LagerMaschinen could be the logical solution for your production concerns. By purchasing your CNC turning and milling center through LagerMaschinen and its team of experts and professionals you'll not only find precisely what you're looking for but will also ensure that it lasts for a lifetime.

          CNC turning and milling center - the most logical choice

          No matter what type of CNC turning and milling center you're looking for LagerMaschinen has what you need. Log on create and account and start shopping at LagerMaschinen today.