CNC Turning- and Milling Center
Machinelist: CNC Turning- and Milling Center
CNC Turning- and Milling Center
- Kirchgeorg Werkzeugmaschinen
- Frankfurter Straße 141
- 63303 Dreieich-Sprendlingen
- Deutschland
-
0049-(0)-6103-9909-0
0049-(0)-6103-9909-50 -
info@kirchgeorg.de
www.kirchgeorg.de
#1072-20344 · CNC Turning- and Milling Center
GILDEMEISTER - CTX 420 linear/CNC-Heidenhain - - 2004 - Data Pilot 4290 HEIDENHAIN
Technical details
- Serial-No.: 02260003251 - Machine ON: 19.039 h - Programm ON: 2.676 h - control: HEIDENHAIN Data Pilot 4290 - New main spindle bearings - Z-Axis ball screw reconditioned incl. new bearings - electronic hand wheel - C-Axis / driven tools - chip conveyor - coolant equipment - machine lamp
Datasheet
Request / Contact
- Knops Werkzeugmaschinen
- Konrad-Zuse-Straße 5
- 40789 Monheim
- Deutschland
-
02173 - 39494-0
02173 - 39494-29 -
maschinen@knops.de
www.knops.de
#1022-2284 · CNC Turning- and Milling Center
GILDEMEISTER - GMX 300 linear - - 2004 - SIEMENS 840 D
Technical details
First put into operation February 2005 Working hours February 2024: - Machine on: 64.333 h - Program-cycle: 41.420 h - Spindle-hours: 32.272 h * Main and subspindle, 2 x C-axis * 3-jaw power chuck RÖHM KFD-HS 250/3 for mainspindle * 3-jaw power chuck RÖHM KFD-HS 250/3 for subspindle * CNC control SIEMENS Sinumerik 840 D powerline * Turning and milling unit (HSK-A63), B-axis, Y-axis * 120-station tool changer * 12-position turret (bottom), all positions driven (10.7 kW, 4000 rpm) * Cooling unit * Coolant filter system 980 L * Chip conveyor * Oilmist extractor Optionally, a short bar loader, make Breuning ILS, passage 90 mm can be offered for € 5.500,-
- Stiens Werkzeugmaschinen GmbH
- Mittelweg 92
- 59302 Oelde
- Deutschland
-
+49 252283490
(0049) - 2522 - 8349-20 -
info@stiens.de
www.stiens.de
#1039-9178 · CNC Turning- and Milling Center
GILDEMEISTER - CTX 410 V3 - - 2004 - Heidenhain Plus iT
Technical details
CNC Turning- and Milling Center Gildemeister - CTX 410 V3 - ToolDrive - C-Axis - BarFeeder
- Kirchgeorg Werkzeugmaschinen
- Frankfurter Straße 141
- 63303 Dreieich-Sprendlingen
- Deutschland
-
0049-(0)-6103-9909-0
0049-(0)-6103-9909-50 -
info@kirchgeorg.de
www.kirchgeorg.de
#1072-20346 · CNC Turning- and Milling Center
GILDEMEISTER - CTX 420 linear V3 - Siem. 840D - - 2003 - SINUMERIK 840D ShopTurn
Technical details
- Serial-No.: 02260001561 - Machine ON: 64.692 h - Programm ON: 18.296 h - control: SIEMENS 840D ShopTurn - electronic hand wheel - C-Axis / driven tools - Spindle bearings NEW - Ball screw Z-Axis incl. bearings NEW - chip conveyor - coolant equipment - machine lamp
Datasheet
Request / Contact
- Stiens Werkzeugmaschinen GmbH
- Mittelweg 92
- 59302 Oelde
- Deutschland
-
+49 252283490
(0049) - 2522 - 8349-20 -
info@stiens.de
www.stiens.de
#1039-9126 · CNC Turning- and Milling Center
GILDEMEISTER - CTX 310 V3 - - 2003 - 840 D Siemens
Technical details
CNC Turning- and Milling Center GILDEMEISTER - CTX 310 V3 - incl. bar loading magazine IRCO Breuning - incl. 2x collet chucks - incl. 2x jaw chuck including various clamping jaws - various VDI30 rotary holders - various reducing tubes - approx. 20x collets 173E - Pressure sleeve for collets 185E (for bars up to Ø50) - 11x collets 185E
- Marcels Maschinen AG
- Anthoptstrasse 11
- 8222 Beringen (Schaffhausen)
- Schweiz
-
(0041) 44 872 3400
(0041) 44 872 3403 -
info@marcels-maschinen.ch
http://www.marcels-maschinen.ch
#1065-4699 · CNC Turning- and Milling Center
GILDEMEISTER - Twin 42-II - - 2003 - SIEMENS 840D Powerline
Technical details
Y- & B- axes Misc. accessories more details on www.marcels-maschinen.ch
Datasheet
Request / Contact
- STEINHAND GmbH
- Am Stahlwerk 15
- 45527 Hattingen
- Deutschland
-
+49 (0) 2324 / 977 26 - 01
+49 (0) 2324 / 977 26 - 99 -
info@steinhand.de
www.steinhand.de
#2026-1661 · CNC Turning- and Milling Center
NAKAMURA TOME - WT-250 MMY - - 2003 - Fanuc 18i TB
Technical details
CNC Turning- and Milling Center | NAKAMURA TOME - WT-250 MMY equipped with bar loader (Profimat) Equipment/accessories: - Bar loader - driven tool holders Further technical data: - Chuck size: Hainbuch collets - Distance between spindle end faces: 555 mm - Max. outside diameter for bar material: 65 mm - Spindle power 1 = 11 / 15 kW - Spindle power 2 = 7.5 / 11 kW - Max. torque: Nm 265 (kgf-m 27) The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: WT-250MMY | WT 250MMY | WT250MMY
- STEINHAND GmbH
- Am Stahlwerk 15
- 45527 Hattingen
- Deutschland
-
+49 (0) 2324 / 977 26 - 01
+49 (0) 2324 / 977 26 - 99 -
info@steinhand.de
www.steinhand.de
#2026-1540 · CNC Turning- and Milling Center
JOHNFORD - SL-50-CF-Y - - 2003 - FANUC Oi-TB
Technical details
CNC Turning- and Milling Center | JOHNFORD - SL-50-CF-Y equipped with chip conveyor and bar feeder. Additional equipment: + C axis + Y axis + driven tools The machine is in good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SL 50 | SL50 | SL-50 CF Y | SL50 CF Y
- STEINHAND GmbH
- Am Stahlwerk 15
- 45527 Hattingen
- Deutschland
-
+49 (0) 2324 / 977 26 - 01
+49 (0) 2324 / 977 26 - 99 -
info@steinhand.de
www.steinhand.de
#2026-1525 · CNC Turning- and Milling Center
GILDEMEISTER - SPRINT 32 linear - - 2003 - FANUC
Technical details
CNC Turning- and Milling Center | GILDEMEISTER - SPRINT 32 linear equipped with C-axis for mainspindle and counter-spindle and bar feeder Iemca Further information: - collet holder for main and pick up spindle - 5 position 16x16 toolholder for slide 1 - 3 driven tools on slide 1 with spindles ESX16 - drive for rotating tools slide 2 - 4-pos.tool holder diam.32mm for slide - 2-chip conveyor h=1100 mm - pneum. ejector and unloading system with belt -pneum. - cleaning system for counterspindle¬ - collet - Mechanical preparation for oil mist filter - electr. and software preparation for bar loader – synchronization between main and counter spindle - constant cutting speed and rigid tapping - spindle speed control - piece/time counter - Software for bar-feeding in overlapped time - Load Monitor software (tool effort management) - manuals The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 32linear | SPRINT32linear | 32-linear
- Knops Werkzeugmaschinen
- Konrad-Zuse-Straße 5
- 40789 Monheim
- Deutschland
-
02173 - 39494-0
02173 - 39494-29 -
maschinen@knops.de
www.knops.de
#1022-2288 · CNC Turning- and Milling Center
GILDEMEISTER - TWIN 42 - - 2002 - Siemens 840 D Powerline
Technical details
Equipment: CNC control Siemens 840 D Powerline. 2 x 12-station turret, all positions driven (speed 30-6000 rpm., 3,8/2,1 kW) Y axis Collection device with gripper Belt filter system Bar feeder, make Breuning/IRCO, model ILS TBL 72.12, bar length 1200 mm Counter spindle from RUN-TEC, completely overhauled Additional tailstock under the counter spindle Chip conveyor
- Stiens Werkzeugmaschinen GmbH
- Mittelweg 92
- 59302 Oelde
- Deutschland
-
+49 252283490
(0049) - 2522 - 8349-20 -
info@stiens.de
www.stiens.de
#1039-9042 · CNC Turning- and Milling Center
MAZAK - SQT 250 MS - - 2002 - PC Fusion CNC 640 T
Technical details
CNC - Turning- and MillingCenter MAZAK - Super Quick Turn 250 MS - Main- and Subspindle - Tool-Drive - C-Axis
- GWM GmbH
- Gewerbestr. 2
- 79639 Grenzach-Wyhlen
- Deutschland
-
(0049) 7624 9082 0
07624 9082-206 -
info@gromag.ch
www.gromag.ch
#1044-3285 · CNC Turning- and Milling Center
HITACHI SEIKI - HiCell 400 - - 2002 - CNC Fanuc
Technical details
Machine is in very good condition. Many tool holders Serial number CH- 40012
- FIMOTEC
- 20 RUE AMPERE
- 67500 HAGUENAU
- Frankreich
-
+33 (0)388720247
+33 (0)388936066 -
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR
#1105-03816 · CNC Turning- and Milling Center
MAZAK - SQT 200 M - - 2001 - MAZATROL FUSION 640 T Dialog
Technical details
Machine IN VERY GOOD CONDITION 1 straight (radial) and 1 angular (axial) rotarytool holders are included. CHIP CONVOYER TAILSTOCK
- FIMOTEC
- 20 RUE AMPERE
- 67500 HAGUENAU
- Frankreich
-
+33 (0)388720247
+33 (0)388936066 -
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR
#1105-03910 · CNC Turning- and Milling Center
MORI SEIKI - SL 153 SY - - 2001 - MSG 501 FANUC
Technical details
WITH C + Y AXIS MSG FANUC 501 - Programming - driven tools SUP SPINDEL - coolant equipment SHIP CONVEYOR
- FIMOTEC
- 20 RUE AMPERE
- 67500 HAGUENAU
- Frankreich
-
+33 (0)388720247
+33 (0)388936066 -
FIMOTEC@WANADOO.FR
WWW.FIMOTEC.FR
#1105-03990 · CNC Turning- and Milling Center
HARDINGE - QUEST 6/42 - - 2001 - fanuc 16 it
Technical details
CNC-Lathe with driven tools,c axis , sub-spindel - chipconveyor - - some toolholders live and fixed vdi 30 - programmable partscatcher cnc fanuc 16 it
- Christoph Busch GmbH
- Dieselstr. 22
- 41352 Korschenbroich
- Deutschland
-
+49 (0) 2182 570 5930
+49 (0) 2182 5785202 -
mail@busch-gruppe.de
www.busch-gruppe.de
#2052-06524 · CNC Turning- and Milling Center
REINECKER KOPP - VSC 250 DS - - 2001 - Siemens 840 D
Technical details
- Knops Werkzeugmaschinen
- Konrad-Zuse-Straße 5
- 40789 Monheim
- Deutschland
-
02173 - 39494-0
02173 - 39494-29 -
maschinen@knops.de
www.knops.de
#1022-H08710 · CNC Turning- and Milling Center
MAZAK - Integrex 200 SY + GL100C - - 2001 - MAZATROL 640 MT
Technical details
MAZATROL 640 MT control max. turning diameter 540 mm Z-axis movements 1.065 mm Main spindle, max. speed 5.000 rpm Main spindle full C-axis Sub spindle, max. speed 6.000 rpm Y-axis +/- 80 mm Milling spindle, max. speed 6.000 rpm Full B-axis, 225° ATC 40 tools KM-63 toolholders Tooleye 1 x 3-Backenfutter, Diameter 210 mm 1 x 3-Backenfutter, Diameter 170 mm Portallader Flex GL-100C High pressure coolant, 20 bar Swarf conveyor
- STEINHAND GmbH
- Am Stahlwerk 15
- 45527 Hattingen
- Deutschland
-
+49 (0) 2324 / 977 26 - 01
+49 (0) 2324 / 977 26 - 99 -
info@steinhand.de
www.steinhand.de
#2026-1364 · CNC Turning- and Milling Center
INDEX - G300 - - 2000 - Siemens C 200-4
Technical details
CNC Turning- and Milling Center | INDEX - G300 + 2 turret + tailstock + bar feeder: Index MBL 65 Scope of delivery: - tool holder fixed The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G 300 | G-300
- Stiens Werkzeugmaschinen GmbH
- Mittelweg 92
- 59302 Oelde
- Deutschland
-
+49 252283490
(0049) - 2522 - 8349-20 -
info@stiens.de
www.stiens.de
#1039-9182 · CNC Turning- and Milling Center
EMCO - EmcoTurn 465 DS - - 2000 - Sinumerik 840 D Siemens
Technical details
CNC - Turning- and Milling Center EMCO - Emcoturn 465 DS - Main- and Subspindle - 2 turrets - live tool positions - C-Achse - Stangenlademagazin BREUNING Profimat
- Stiens Werkzeugmaschinen GmbH
- Mittelweg 92
- 59302 Oelde
- Deutschland
-
+49 252283490
(0049) - 2522 - 8349-20 -
info@stiens.de
www.stiens.de
#1039-9061 · CNC Turning- and Milling Center
OKUMA - MacTurn 50 - - 2000 - OSP 7000 L
Technical details
CNC - Turning- and MillingCenter OKUMA - MacTurn 50
- Gustav Schönberger GmbH
- Hünderstr. 14
- 74080 Heilbronn
- Deutschland
-
(0049)7131 46060
(0049)7131 460620 -
schoenberger@gsh-maschinen.de
www.gsh-maschinen.de
#1036-032998 · CNC Turning- and Milling Center
MAZAK - Integrex 35 - - 1999 - Mazatrol PC Fusion 640MT
Technical details
Mazatrol PC Fusion 640 MT control milling spindle C-axis Y-axis 40-fold magazine 3-jaw chuck Kitagawa Steady rest tail stock Tool Eye coolant device chip conveyor Technische Daten / technical details: Drehdurchmesser / turning diameter 575 mm Drehdurchmesser über Schlitten / turning diameter over sledge 470 mm max. Drehlänge / max. turning length 1500 mm X-Achsenverfahrweg / travel x-axis 450 mm Z-Achsenverfahrweg / travel z-axis 1527 mm Y-Achsenverfahrweg / travel y-axis +-90 mm max. Drehzahl Hauptspindel / max. spindle speed main spindle 35-3000 UpM / rpm Drehzahl Frässpindel / speed of milling spindle 15-6000 UpM / rpm Anzahl der Magazinplätze / number of places in magazine 40 fach /fold Gewicht der Maschine / weight 9500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
- Marcels Maschinen AG
- Anthoptstrasse 11
- 8222 Beringen (Schaffhausen)
- Schweiz
-
(0041) 44 872 3400
(0041) 44 872 3403 -
info@marcels-maschinen.ch
http://www.marcels-maschinen.ch
#1065-J734 · CNC Turning- and Milling Center
MURATEC - MT-25 MCY - - 1999 - FANUC 16T-C
Technical details
Datasheet
Request / Contact
- Brandner Revalue GmbH
- Mozartstr. 24
- 89264 Weißenhorn
- Deutschland
-
+49 (0) 7309 928 58 75
+49 (0) 7309 928 58 74 -
mb@b-rv.de
www.b-rv.de
#2011-22104 · CNC Turning- and Milling Center
OKUMA - MacTurn 50 - - 1999 -
Technical details
- STEINHAND GmbH
- Am Stahlwerk 15
- 45527 Hattingen
- Deutschland
-
+49 (0) 2324 / 977 26 - 01
+49 (0) 2324 / 977 26 - 99 -
info@steinhand.de
www.steinhand.de
#2026-1662 · CNC Turning- and Milling Center
NAKAMURA TOME - WT-250 MMY - - 1999 - FANUC 18i-T
Technical details
CNC Turning- and Milling Center | NAKAMURA TOME - WT-250 MMY equipped with tool changer and measuring system. Equipment/accessories: - parts gripper - small package of tools (2x radial & 2x axial driven tools + various passive holders) The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: WT-250MMY | WT 250MMY | WT250MMY
TOP Manufacturer:
GILDEMEISTER - MORI SEIKI - MAZAK - INDEX - DMG MORI - KRAFT - CMZ - DOOSAN - OKUMA - DOOSAN DAEWOO -