,

Bitte einen Suchbegriff eingeben - Unesite pojam za pretraživanje
Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:

          CNC Turning- and Milling Center

          Machinelist: CNC Turning- and Milling Center


          CNC Turning- and Milling Center

          used Lathes CNC Turning- and Milling Center MORI SEIKI NTX1000


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17959 · CNC Turning- and Milling Center

          MORI SEIKI - NTX1000 - - 2012 - MSX-711-IV Mori Seiki

          Technical details
          turning diameter 370 mm︱turning length 424 mm︱control MSX-711-IV Mori Seiki︱swing diameter 370 mm︱X1- Axis 380 mm︱X2- Axis 155 mm︱Z1- Axis 460+155 mm︱Z2- Axis 610 mm︱y-axis +/- 105 mm︱B - axis +/- 120 °︱bar material dia. 65 mm︱speed spindle max. S1 5.000 / S2 6.000 U/min.︱spindle bore S1/S2 65/38 mm︱ 12000 1/min︱tool taper Capto C5 ︱toolpiece magazine: chain magazine 76 Stück︱tool turret with 10 work positions ︱total power requirement 45 kW︱weight of the machine ca. 10,5 t︱dimensions of the machine ca. 2,71 x 2,43 x 2,40 m︱
          MAPPS control system Renishaw HPRA (manual tool presetter) Blum Laser Control Direct measuring system X;Y;Z;B Collet chuck SMW Autoblok KSZ-MB-040-Z140 Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll band filter KF10/500 / IKZ with milling spindle 7 stages up to 70 bar Chip conveyor ConSep 2000
            turning diameter 370 mm
            turning length 424 mm
            control MSX-711-IV Mori Seiki
            swing diameter 370 mm
            X1- Axis 380 mm
            X2- Axis 155 mm
            Z1- Axis 460+155 mm
            Z2- Axis 610 mm
            y-axis +/- 105 mm
            B - axis +/- 120 °
            bar material dia. 65 mm
            speed spindle max. S1 5.000 / S2 6.000 U/min.
            spindle bore S1/S2 65/38 mm
            12000 1/min
            tool taper Capto C5
            toolpiece magazine: chain magazi. 76 Stück
            total power requirement 45 kW
            weight of the machine ca. 10,5 t
            dimensions of the machine ca. 2,71 x 2,43 x 2,40 m
            Description :
            MAPPS control system
            Renishaw HPRA (manual tool presetter)
            Blum Laser Control
            Direct measuring system X;Y;Z;B
            Collet chuck SMW Autoblok KSZ-MB-040-Z140
            Workpiece conveyor belt
            Bar feeder Breuning Irco ILS-RBK-10012
            Knoll band filter KF10/500 / IKZ with milling spindle 7 stages up to 70 bar
            Chip conveyor ConSep 2000


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center WFL-MILLTURN M40-G/3000


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17881 · CNC Turning- and Milling Center

          WFL-MILLTURN - M40-G/3000 - - 2008 - SIN 840 D Siemens

          Technical details
          turning diameter 520 mm︱turning length 3000 mm︱control SIN 840 D Siemens︱z-axis 3150 mm︱Feed z- axis 1 - 40.000 mm / min︱rapid traverse Z-axis 40,00 m/min︱x-axis 600 mm︱feed x-axis 1 - 30.000 mm/min︱rapid traverse X-axis 30,00 m/min︱Main spindle S1 ︱spindle turning speed range 1 - 3.300 U/min︱power capacity at 100 % load 29,00 kW︱spindle head DIN 55026 - Size A11 ︱spindle diameter in front bearing 160 mm︱spindle bore 115 mm︱C-axis 360 x 0,001 °︱milling spindle S2 ︱tool taper Capto C6 ︱turning speed range - stepless 1 - 6.000 U/min︱y-axis -100 / +150 mm︱
          Main spindle full clamping cylinder on the left, 2-compression clamping, with SMW 3-jaw chuck KNCS-N 315-91 Counter spindle, full clamping cylinder on the right, 2-compression clamping, clamping path monitoring, with SMW 3-jaw chuck KNCS-N 315-91; tailstock function Cross slide below with 2x12-fold disc turret, tool holder Capto C6 hydraulic steady Ø 35 - 245 mm, incl. holder for installation on the left or right tool disc (not swivelling) probe plug gauge various tool holders Capto C6 Coolant paper band filter system DGS 1000L with skimmer air filter system
            turning diameter 520 mm
            turning length 3000 mm
            control SIN 840 D Siemens
            z-axis 3150 mm
            Feed z- axis 1 - 40.000 mm / min
            rapid traverse Z-axis 40,00 m/min
            x-axis 600 mm
            feed x-axis 1 - 30.000 mm/min
            rapid traverse X-axis 30,00 m/min
            Main spindle S1
            spindle turning speed range 1 - 3.300 U/min
            power capacity at 100 % load 29,00 kW
            spindle head DIN 55026 - Size A11
            spindle diameter in front bearin. 160 mm
            spindle bore 115 mm
            C-axis 360 x 0,001 °
            milling spindle S2
            tool taper Capto C6
            turning speed range - stepless 1 - 6.000 U/min
            y-axis -100 / +150 mm
            Description :
            Main spindle full clamping cylinder on the left, 2-compression clamping, with
            SMW 3-jaw chuck
            KNCS-N 315-91
            Counter spindle, full clamping cylinder on the right, 2-compression clamping,
            clamping path monitoring,
            with SMW 3-jaw chuck KNCS-N 315-91; tailstock function
            Cross slide below with 2x12-fold disc turret, tool holder Capto C6
            hydraulic steady Ø 35 - 245 mm, incl. holder for installation on the left or
            right tool disc (not swivelling)
            probe
            plug gauge
            various tool holders Capto C6
            Coolant paper band filter system DGS 1000L with skimmer
            air filter system


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center INDEX G200


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17898 · CNC Turning- and Milling Center

          INDEX - G200 - - 2007 - C200-4D INDEX

          Technical details
          turning diameter 200 mm︱turning length 400 mm︱control C200-4D INDEX︱spindle passage 42 mm︱ 6.000 1/min︱Main spindle 7.000 1/min︱counter-spindle 7.000 1/min︱spindle diameter in front bearing 85 mm︱clamping chuck diameter 140/160 mm︱Turret 1 14 tools VDI 25︱Turret 2 14 tools VDI 25︱total power requirement 38 kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 7,1 x 2,35 x 2,2 m︱
          Main (S3) and counter spindle (S4) with tailstock function hydraulic clamping cylinders in the main and counter spindle S3 spindle 42mm/13kW/7000 rpm S4 spindle 42mm/13kW/7000 rpm (electric shaft) S1;S2;S3;S4 as C axis 2 tool breakage sensors Turret 1 (X1;Y;Z1) with 14 stations / driven / VDI25 Turret 2 (X2;Z2) with 14 stations / powered / VDI25 Z4 axis counter spindle Z5 axis portal removal device Index conveyor belt 1 Transmit / Tracyl in CH1/CH2 Hainbuch collet system UNIMAG interface Short bar loader Breuning IRCO RBK 10012 built in 2007 chip conveyor Coolant device
            turning diameter 200 mm
            turning length 400 mm
            control C200-4D INDEX
            spindle passage 42 mm
            6.000 1/min
            Main spindle 7.000 1/min
            counter-spindle 7.000 1/min
            spindle diameter in front bearin. 85 mm
            clamping chuck diameter 140/160 mm
            Turret 1 14 tools VDI 25
            Turret 2 14 tools VDI 25
            total power requirement 38 kW
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 7,1 x 2,35 x 2,2 m
            Description :
            Main (S3) and counter spindle (S4) with tailstock function
            hydraulic clamping cylinders in the main and counter spindle
            S3 spindle 42mm/13kW/7000 rpm
            S4 spindle 42mm/13kW/7000 rpm (electric shaft)
            S1;S2;S3;S4 as C axis
            2 tool breakage sensors
            Turret 1 (X1;Y;Z1) with 14 stations / driven / VDI25
            Turret 2 (X2;Z2) with 14 stations / powered / VDI25
            Z4 axis counter spindle
            Z5 axis portal removal device
            Index conveyor belt 1
            Transmit / Tracyl in CH1/CH2
            Hainbuch collet system
            UNIMAG interface
            Short bar loader Breuning IRCO RBK 10012 built in 2007
            chip conveyor
            Coolant device


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center WFL-MILLTURN M40-G/3000


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17911 · CNC Turning- and Milling Center

          WFL-MILLTURN - M40-G/3000 - - 2004 - SIN 840 D Siemens

          Technical details
          turning diameter 520 mm︱turning length 3000 mm︱control SIN 840 D Siemens︱z-axis 3150 mm︱Feed z- axis 1 - 40.000 mm / min︱rapid traverse Z-axis 40,00 m/min︱x-axis 600 mm︱feed x-axis 1 - 30.000 mm/min︱rapid traverse X-axis 30,00 m/min︱Main spindle S1 ︱spindle turning speed range 1 - 3.300 U/min︱power capacity at 100 % load 29,00 kW︱spindle head DIN 55026 - Size A11 ︱spindle diameter in front bearing 160 mm︱spindle bore 115 mm︱C-axis 360 x 0,001 °︱milling spindle S2 ︱tool taper Capto C6 ︱turning speed range - stepless 1 - 6.000 U/min︱y-axis -100 / +150 mm︱
          Main / counter spindle with hydr. Power chuck SMW-Autoblok KNCS-N 225-65 SMW steady rest type KLU-222-ZSW (Ø20-254mm) Coolant band filter system POLO SB-A0.4 pressureless volume V1=100L/V2=1100L Chain oil skimmer Flexo Cooling lubricant care Hamma Mikro 1000 electronic hand wheel Infrared probe Pickup station for 3 tools max. length 1000mm chip conveyor leveling elements wooden grates
            turning diameter 520 mm
            turning length 3000 mm
            control SIN 840 D Siemens
            z-axis 3150 mm
            Feed z- axis 1 - 40.000 mm / min
            rapid traverse Z-axis 40,00 m/min
            x-axis 600 mm
            feed x-axis 1 - 30.000 mm/min
            rapid traverse X-axis 30,00 m/min
            Main spindle S1
            spindle turning speed range 1 - 3.300 U/min
            power capacity at 100 % load 29,00 kW
            spindle head DIN 55026 - Size A11
            spindle diameter in front bearin. 160 mm
            spindle bore 115 mm
            C-axis 360 x 0,001 °
            milling spindle S2
            tool taper Capto C6
            turning speed range - stepless 1 - 6.000 U/min
            y-axis -100 / +150 mm
            Description :
            Main / counter spindle with hydr. Power chuck SMW-Autoblok KNCS-N 225-65
            SMW steady rest type KLU-222-ZSW (Ø20-254mm)
            Coolant band filter system POLO SB-A0.4 pressureless volume V1=100L/V2=1100L
            Chain oil skimmer Flexo
            Cooling lubricant care Hamma Mikro 1000
            electronic hand wheel
            Infrared probe
            Pickup station for 3 tools max. length 1000mm
            chip conveyor
            leveling elements
            wooden grates


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center NILES-SIMMONS N50MCM


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-52764 · CNC Turning- and Milling Center

          NILES-SIMMONS - N50MCM - - 2002 - SINUMERIK 840D

          Technical details
          turning diameter 900 mm︱turning length 4500 mm︱control SINUMERIK 840D ︱speeds 10 - 1.600 U/min︱power capacity 60 kW︱spindle nose A15 DIN 55026 ︱bearing diameter 280 mm︱diameter of quill 135 mm︱quill stroke 250 mm︱quill taper MK5 ︱milling spindle HSK 100 A ︱y-travel -200 / +300 mm︱B - axis - 125 / +95 °︱tool magacine with 96 ︱total power requirement 158 kW︱weight of the machine ca. 52 t︱dimensions of the machine ca. 12,20 x 3,80 x 4,00 m︱
          Additional carriage with milling wheel from Burgsmüller: - Diameter 360mm - Drive power 37 kW - Immersion depth max. 260 mm
            turning diameter 900 mm
            turning length 4500 mm
            control SINUMERIK 840D
            speeds 10 - 1.600 U/min
            power capacity 60 kW
            spindle nose A15 DIN 55026
            bearing diameter 280 mm
            diameter of quill 135 mm
            quill stroke 250 mm
            quill taper MK5
            milling spindle HSK 100 A
            y-travel -200 / +300 mm
            B - axis - 125 / +95 °
            tool magacine with 96
            total power requirement 158 kW
            weight of the machine ca. 52 t
            dimensions of the machine ca. 12,20 x 3,80 x 4,00 m
            Description :
            Additional carriage with milling wheel from Burgsmüller:
            - Diameter 360mm
            - Drive power 37 kW
            - Immersion depth max. 260 mm


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          A CNC Turning and Milling Center from LagerMaschinen
          A CNC turning and milling center from LagerMaschinen - good for business

          A CNC turning and milling center from LagerMaschinen will certainly be a great advantage to your small or medium-sized business. Choose from a CNC turning and milling center that fits your needs exactly. A CNC turning and milling center uses either one of multiple axes to calibrate and work wood metal or other hard materials. When purchasing a CNC turning and milling center from LagerMaschinen you'll be able to ensure quality control as well as to speak directly with sellers. Let LagerMaschinen's qualified experts assist you in your search for your next business machine.

          CNC turning and milling center from LagerMaschinen

          A CNC turning and milling center (also known as a lathe) can be used for many different purposes. No matter what your end product a CNC turning and milling center from LagerMaschinen is just what you need. Used machines are more economically viable as well as kinder to the environment. A CNC turning and milling center from LagerMaschinen could be the logical solution for your production concerns. By purchasing your CNC turning and milling center through LagerMaschinen and its team of experts and professionals you'll not only find precisely what you're looking for but will also ensure that it lasts for a lifetime.

          CNC turning and milling center - the most logical choice

          No matter what type of CNC turning and milling center you're looking for LagerMaschinen has what you need. Log on create and account and start shopping at LagerMaschinen today.