,

Bitte einen Suchbegriff eingeben - Unesite pojam za pretraživanje
Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:

          Lathe - cycle-controlled

          Machinelist: Lathe - cycle-controlled


          Lathe - cycle-controlled

          used Lathes Lathe -  cycle-controlled MONFORTS KNC 6 x 3000


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-51210 · Lathe - cycle-controlled

          MONFORTS - KNC 6 x 3000 - - 2003 - Monforts EuroTurn

          Technical details
          turning diameter 290 mm︱turning length 3000 mm︱swing dia. 650 mm︱swing diameter over face slide 350 mm︱spindle bore diameter 71 mm︱number of controlled axis 2 ︱control Monforts EuroTurn ︱turning speed range 2- 1800 U/min︱rapid speed 10/5 m/min︱tail stock MK 6 ︱number of tapers in turret head Multifix C ︱bed width 550 mm︱power requirement 21/15 kW︱max. torque on the spindle 3320 Nm︱dimensions m︱weight of the machine ca. 6,5 t︱
          Used Teach in lathe in good condition Zubehör: - 3 jaw chuck - Multifix C with Capto quick change tool - coolant system - steady - chip conveyor - 4 mech. gear steps (2- 225/ 4- 450/ 8- 900/ 16- 1800 rpm) - electric break main motor
            turning diameter 290 mm
            turning length 3000 mm
            swing dia. 650 mm
            swing diameter over face slide 350 mm
            spindle bore diameter 71 mm
            number of controlled axis 2
            control Monforts EuroTurn
            turning speed range 2- 1800 U/min
            rapid speed 10/5 m/min
            tail stock MK 6
            number of tapers in turret head Multifix C
            bed width 550 mm
            power requirement 21/15 kW
            max. torque on the spindle 3320 Nm
            weight of the machine ca. 6,5 t
            Description :
            Used Teach in lathe in good condition

            Zubehör:
            - 3 jaw chuck
            - Multifix C with Capto quick change tool
            - coolant system
            - steady
            - chip conveyor
            - 4 mech. gear steps (2- 225/ 4- 450/ 8- 900/ 16- 1800 rpm)
            - electric break main motor


        • Klaus Rosenboom GmbH
        • Oppenheimer Str. 19
        • 28307 Bremen

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled MONFORTS KNC 5 1000


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04072 · Lathe - cycle-controlled

          MONFORTS - KNC 5 1000 - - 2001 - SYSTEM MTC-K

          Technical details
          turning diameter 500 mm︱turning length 1000 mm︱control MONFORTS CONTROL ︱control SYSTEM MTC-K ︱turning diameter over bed slide 290 mm︱spindle bore 70 mm︱spindle turning speed range 3 - 2800 U/min︱spindle power 15 kW︱max. torque on the spindle 1530 Nm︱spindle head DIN 55027 Gr. 8 ︱feed power X/Z axis 11300 N︱rapid travel - longitudinal/face 10 / 5 m/min︱bed width 360 mm︱travel of cross-slide 265 mm︱upper slide travel 140 mm︱turning tool - shaft cross cut 32 x 25 mm︱tailstock quill diameter 80 mm︱tailstock quill stroke 160 mm︱tailstock taper MT 5 ︱total power requirement kW︱
          Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant
            turning diameter 500 mm
            turning length 1000 mm
            control MONFORTS CONTROL
            control SYSTEM MTC-K
            turning diameter over bed slide 290 mm
            spindle bore 70 mm
            spindle turning speed range 3 - 2800 U/min
            spindle power 15 kW
            max. torque on the spindle 1530 Nm
            spindle head DIN 55027 Gr. 8
            feed power X/Z axis 11300 N
            rapid travel - longitudinal/face 10 / 5 m/min
            bed width 360 mm
            travel of cross-slide 265 mm
            upper slide travel 140 mm
            turning tool - shaft cross cut 32 x 25 mm
            tailstock quill diameter 80 mm
            tailstock quill stroke 160 mm
            tailstock taper MT 5
            Description :
            Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT,
            coolant


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled MONFORTS KNC 5 1500


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-04076 · Lathe - cycle-controlled

          MONFORTS - KNC 5 1500 - - 2000 - SYSTEM EURO TURN

          Technical details
          turning diameter 500 mm︱turning length 1500 mm︱control MONFORTS CONTROL ︱control SYSTEM EURO TURN ︱turning diameter over bed slide 290 mm︱spindle bore 70 mm︱spindle turning speed range 3 - 2800 U/min︱spindle power 15 kW︱max. torque on the spindle 1530 Nm︱spindle head DIN 55027 Gr. 8 ︱feed power X/Z axis 11300 N︱rapid travel - longitudinal/face 10 / 5 m/min︱bed width 360 mm︱travel of cross-slide 265 mm︱upper slide travel 140 mm︱turning tool - shaft cross cut 32 x 25 mm︱tailstock quill diameter 80 mm︱tailstock quill stroke 160 mm︱tailstock taper MT 5 ︱total power requirement kW︱
          Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant
            turning diameter 500 mm
            turning length 1500 mm
            control MONFORTS CONTROL
            control SYSTEM EURO TURN
            turning diameter over bed slide 290 mm
            spindle bore 70 mm
            spindle turning speed range 3 - 2800 U/min
            spindle power 15 kW
            max. torque on the spindle 1530 Nm
            spindle head DIN 55027 Gr. 8
            feed power X/Z axis 11300 N
            rapid travel - longitudinal/face 10 / 5 m/min
            bed width 360 mm
            travel of cross-slide 265 mm
            upper slide travel 140 mm
            turning tool - shaft cross cut 32 x 25 mm
            tailstock quill diameter 80 mm
            tailstock quill stroke 160 mm
            tailstock taper MT 5
            Description :
            Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT,
            coolant


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled MONFORTS KNC 5 - 1000 / SIEMENS


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20337 · Lathe - cycle-controlled

          MONFORTS - KNC 5 - 1000 / SIEMENS - - 1999 - Sinumerik 810 D SIEMENS

          Technical details
          centre height 255 mm︱centre distance 1080 mm︱turning diameter over bed 500 mm︱turning diameter over slide 290 mm︱turning length 1000 mm︱spindle taper KK 8 DIN 55027︱control Sinumerik 810 D SIEMENS︱bed width 360 mm︱spindle bore 70 mm︱turning speed range 2 - 2800 U/min︱rapid travel - longitudinal/face 10 / 5 m/min︱quick change toolholder MULTIFIX Typ B / CAPTO︱drive capacity - spindle motor 11,0 kW︱taper in tailstock-quill MK 5 ︱dia. of quill 80 mm︱quill stroke 160 mm︱coolant ︱voltage 400 V︱total power requirement 16,0 kVA︱weight of the machine ca. 3,0 t︱
          - Serial-No.: 346 / 03 - control: SIEMENS Sinumerik 810 D - quick change tool holder MULTIFIX - coolant equipment - machine lamp
            centre height 255 mm
            centre distance 1080 mm
            turning diameter over bed 500 mm
            turning diameter over slide 290 mm
            turning length 1000 mm
            spindle taper KK 8 DIN 55027
            control Sinumerik 810 D SIEMENS
            bed width 360 mm
            spindle bore 70 mm
            turning speed range 2 - 2800 U/min
            rapid travel - longitudinal/face 10 / 5 m/min
            quick change toolholder MULTIFIX Typ B / CAPTO
            drive capacity - spindle motor 11,0 kW
            taper in tailstock-quill MK 5
            dia. of quill 80 mm
            quill stroke 160 mm
            voltage 400 V
            total power requirement 16,0 kVA
            weight of the machine ca. 3,0 t
            Description :
            - Serial-No.: 346 / 03
            - control: SIEMENS Sinumerik 810 D
            - quick change tool holder MULTIFIX
            - coolant equipment
            - machine lamp


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled MONFORTS KNC 6-2000


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03580 · Lathe - cycle-controlled

          MONFORTS - KNC 6-2000 - - 1998 - MTC K

          Technical details
          turning diameter 650 mm︱turning length 2000 mm︱control MTC K ︱turning diameter over slide rest 360 mm︱turning speeds 1800 U/min︱3-jaw chuck 315 mm︱Holder Multifix ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us.
            turning diameter 650 mm
            turning length 2000 mm
            control MTC K
            turning diameter over slide rest 360 mm
            turning speeds 1800 U/min
            3-jaw chuck 315 mm
            Description :
            About usmore than 400 machines in the warehouse over 12000 m² storage area,
            crane capacity 70 tmore than 1000 items accessories for your workshopYou want
            to sell machines production lines or your company, then talk to us.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled MONFORTS KNC 8 2000


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03735 · Lathe - cycle-controlled

          MONFORTS - KNC 8 2000 - - - Monfort R&D

          Technical details
          turning diameter 800 mm︱turning length 2000 mm︱control Monfort R&D ︱turning diameter over slide 520 mm︱spindle hollow 88 mm︱total power requirement 53 kW︱weight of the machine ca. t︱dimensions of the machine ca. 4,2x2,2x1,9 m︱
            turning diameter 800 mm
            turning length 2000 mm
            control Monfort R&D
            turning diameter over slide 520 mm
            spindle hollow 88 mm
            total power requirement 53 kW
            dimensions of the machine ca. 4,2x2,2x1,9 m


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled MONFORTS KNC5-1500


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03704 · Lathe - cycle-controlled

          MONFORTS - KNC5-1500 - - - Monforts MTCK

          Technical details
          turning diameter 555 mm︱turning length 1500 mm︱turning diameter over slide 290 mm︱3-jaw-chuck diameter 315 mm︱make Röhn ︱control Monforts MTCK︱quick change tool holder Multifix C ︱steady ︱turning speeds 2-2800 U/min︱transmission ratio 3 ︱face slide travel 235 mm︱spindle passage 70 mm︱tailstock quill taper MT 5 ︱total power requirement kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2,9x1,6x1,8 m︱
          The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale; it apply only our business and conditions of sale. About Us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us.
            turning diameter 555 mm
            turning length 1500 mm
            turning diameter over slide 290 mm
            3-jaw-chuck diameter 315 mm
            make Röhn
            control Monforts MTCK
            quick change tool holder Multifix C
            turning speeds 2-2800 U/min
            transmission ratio 3
            face slide travel 235 mm
            spindle passage 70 mm
            tailstock quill taper MT 5
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2,9x1,6x1,8 m
            Description :
            The tech. Data are manufacturer or operator information and therefore for us
            not binding. We reserve the right to prior sale; it apply
            only our business
            and conditions of sale.

            About Us
            more than 400 own machines in stock
            over 12000 m² storage area, crane capacity 70 t
            more than 10000 articles accessories for your workshop
            You want to sell machines, production lines or your company,
            Then contact us.




        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Cycle controlled Lathe from LagerMaschinen
          Cycle controlled Lathe from LagerMaschinen

          In the world of business and production management the cycle controlled lathe draws from several other instruments. Lathes are used in modern and classical carpentry as well as modern electrical and metal pipe work. As with any machine it's important to seek advice from top consultants when purchasing such an item. LagerMaschinen's wide selection of the the cycle controlled lathe will certainly make your choices easier. Please visit the website today to get started on LagerMaschinen.

          LagerMaschinen provides everything you need.

          LagerMaschinen's wide array of services offers its clients many opportunities. For instance you can have your new-but-used used machine correctly installed and connected - both electrically and within the entire computer network - so you can get back to production and production management. With a cycle controlled lathe from LagerMaschinen you'll also have free access to senders and machine experts and be able to ask advice as well as ensure the quality of your machine. LagerMaschinen's wide network in the machining industry means you'll be able to find the exact machine you need around the corner or at least know when you can 'give it a spin'. The cycle controlled lathe from LagerMaschinen - log on today.

          A used machine gets you where you want to be.

          The cycle controlled lathe from LagerMaschinen will certainly increase your bottom line - whether working in the plastics industry or in metalworks a cycle controlled lathe from LagerMaschinen can raise revenue annually and within the short term. Take advantage of LagerMaschinen's various add-ons such as customized delivery and installation. LagerMaschinen.de's cycle controlled lathe - start looking today.