,

Bitte einen Suchbegriff eingeben - Unesite pojam za pretraživanje
Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:

          Lathe - cycle-controlled

          Machinelist: Lathe - cycle-controlled


          Lathe - cycle-controlled

          used Lathes Lathe -  cycle-controlled VOEST-ALPINE STEINEL W570 E/2


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02590 · Lathe - cycle-controlled

          VOEST-ALPINE STEINEL - W570 E/2 - - 1990 -

          Technical details
          turning diameter 570 mm︱turning length 2000 mm︱control ︱centre height 280 mm︱turning diameter over slide rest 340 mm︱bed width 350 mm︱spindle diameter 100 mm︱spindle hollow 63 mm︱transmission ratio 2 ︱spindle turning speed range 1-2500 U/min︱quill stroke 160 mm︱total power requirement 15 kW︱weight of the machine ca. 3,15 t︱dimensions of the machine ca. 2,75x1,65x1,75 m︱
            turning diameter 570 mm
            turning length 2000 mm
            centre height 280 mm
            turning diameter over slide rest 340 mm
            bed width 350 mm
            spindle diameter 100 mm
            spindle hollow 63 mm
            transmission ratio 2
            spindle turning speed range 1-2500 U/min
            quill stroke 160 mm
            total power requirement 15 kW
            weight of the machine ca. 3,15 t
            dimensions of the machine ca. 2,75x1,65x1,75 m


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled VOEST-ALPINE STEINEL W 570 E


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05993 · Lathe - cycle-controlled

          VOEST-ALPINE STEINEL - W 570 E - - 1990 - 805

          Technical details
          . ︱centre distance 2000 mm︱turning diameter max. 570 mm︱spindle bore 70 mm︱control 805 ︱weight of the machine ca. 3 t︱
            .
            centre distance 2000 mm
            turning diameter max. 570 mm
            spindle bore 70 mm
            control 805
            weight of the machine ca. 3 t


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled VOEST-ALPINE-WEIPERT WNE 570/2


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02583 · Lathe - cycle-controlled

          VOEST-ALPINE-WEIPERT - WNE 570/2 - - 1987 - Siemens Sinumeric

          Technical details
          turning diameter 570 mm︱turning length 2000 mm︱control Siemens Sinumeric ︱steady ︱chip conveyor ︱turning dia. in gap 600 mm︱turning diameter over slide 340 mm︱spindle bore 63 mm︱Tool changer ︱total power requirement 22 kW︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. 3,5x1,5x1,5 m︱
            turning diameter 570 mm
            turning length 2000 mm
            control Siemens Sinumeric
            turning dia. in gap 600 mm
            turning diameter over slide 340 mm
            spindle bore 63 mm
            total power requirement 22 kW
            weight of the machine ca. 4,5 t
            dimensions of the machine ca. 3,5x1,5x1,5 m


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled BOEHRINGER DNE 820/DL 3000


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03780 · Lathe - cycle-controlled

          BOEHRINGER - DNE 820/DL 3000 - - 1983 -

          Technical details
          turning diameter 820 mm︱turning length 300 mm︱turning diameter over slide 465 mm︱control ︱max. torque on the spindle 3000 Nm︱turning speeds 5,6-1120 U/min︱Feed 1-5000 mm/min︱Rapid movement 5000 mm/min︱tailstock quill taper MT 6 ︱3 jaw chuck Forckrath mm︱steady mm︱main drive motor 50 kW︱diameter of main spindle 170 mm︱spindle passage 128 mm︱tailstock quill diameter 125 mm︱tailstock quill stroke 250 mm︱z-axis 3000 mm︱x-axis 550 mm︱total power requirement 52 kW︱weight of the machine ca. 7,1 t︱
            turning diameter 820 mm
            turning length 300 mm
            turning diameter over slide 465 mm
            max. torque on the spindle 3000 Nm
            turning speeds 5,6-1120 U/min
            Feed 1-5000 mm/min
            Rapid movement 5000 mm/min
            tailstock quill taper MT 6
            main drive motor 50 kW
            diameter of main spindle 170 mm
            spindle passage 128 mm
            tailstock quill diameter 125 mm
            tailstock quill stroke 250 mm
            z-axis 3000 mm
            x-axis 550 mm
            total power requirement 52 kW
            weight of the machine ca. 7,1 t
            Description :



        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled KAMI DKM 630 / 2000 ZS


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78100 · Lathe - cycle-controlled

          KAMI - DKM 630 / 2000 ZS - - -neu- -

          Technical details
          turning diameter over bed 630 mm︱turning diameter over slide rest 360 mm︱turning length 2000 mm︱turning speeds 20 - 1120 U/min︱centre height 315 mm︱spindle bore 105 mm︱tailstock quill taper MT 5 MK︱tailstock travel 250 mm︱tailstock quill diameter 100 mm︱travel -x axis 370 mm︱travel -z axis 1370 mm︱rapid traverse X-axis 6000 mm/min︱rapid traverse Z-axis 7000 mm/min︱bed width 560 mm︱total power requirement 11 kW︱weight of the machine ca. 5,1 t︱dimensions of the machine ca. 4,5 x 1,6 x 1,85 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 630 mm
            turning diameter over slide rest 360 mm
            turning length 2000 mm
            turning speeds 20 - 1120 U/min
            centre height 315 mm
            spindle bore 105 mm
            tailstock quill taper MT 5 MK
            tailstock travel 250 mm
            tailstock quill diameter 100 mm
            travel -x axis 370 mm
            travel -z axis 1370 mm
            rapid traverse X-axis 6000 mm/min
            rapid traverse Z-axis 7000 mm/min
            bed width 560 mm
            total power requirement 11 kW
            weight of the machine ca. 5,1 t
            dimensions of the machine ca. 4,5 x 1,6 x 1,85 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SCULFORT NN


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-11560C · Lathe - cycle-controlled

          SCULFORT - NN - - -

          Technical details
          centre distance 4000 mm︱turning diameter over bed 1020 mm︱turning diameter over slide rest 600 mm︱turning dia. in gap 1420 mm︱spindle bore 84 mm︱turning speeds 5 - 800 (48x) U/min︱total power requirement 20/40 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          4-jaw chuck Ø 520 mm
            centre distance 4000 mm
            turning diameter over bed 1020 mm
            turning diameter over slide rest 600 mm
            turning dia. in gap 1420 mm
            spindle bore 84 mm
            turning speeds 5 - 800 (48x) U/min
            total power requirement 20/40 kW
            Description :
            4-jaw chuck Ø 520 mm



        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled HEYLIGENSTAEDT 500 EN 8000


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-11563C · Lathe - cycle-controlled

          HEYLIGENSTAEDT - 500 EN 8000 - - -

          Technical details
          centre distance 8000 mm︱turning diameter over bed 1050 mm︱turning diameter over slide rest 730 mm︱turning dia. in gap 1200 mm︱spindle bore 100 mm︱turning speeds 1,7 - 355 U/min︱total power requirement 37 kW︱weight of the machine ca. 11,5 t︱dimensions of the machine ca. m︱
          4-jaw chuck Ø 1000 mm steady rest 250-600 mm
            centre distance 8000 mm
            turning diameter over bed 1050 mm
            turning diameter over slide rest 730 mm
            turning dia. in gap 1200 mm
            spindle bore 100 mm
            turning speeds 1,7 - 355 U/min
            total power requirement 37 kW
            weight of the machine ca. 11,5 t
            Description :
            4-jaw chuck Ø 1000 mm
            steady rest 250-600 mm


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled ZMM C13


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-11537C · Lathe - cycle-controlled

          ZMM - C13 - - -

          Technical details
          spindle passage 136 mm︱turning diameter over bed 800 mm︱turning diameter over slide rest 540 mm︱turning diameter in the gap 1050 mm︱centre distance 6000 mm︱turning speeds 3,3 - 850 (24x) U/min︱coolant ︱chuck diameter 460 mm︱chuck diameter 630 mm︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Rapid traverse Taper turning attachment 2-Axis D.R.O. Steady rest 500 mm
            spindle passage 136 mm
            turning diameter over bed 800 mm
            turning diameter over slide rest 540 mm
            turning diameter in the gap 1050 mm
            centre distance 6000 mm
            turning speeds 3,3 - 850 (24x) U/min
            chuck diameter 460 mm
            chuck diameter 630 mm
            Description :
            Rapid traverse
            Taper turning attachment
            2-Axis D.R.O.
            Steady rest 500 mm


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SAEILO Dialog A-50


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78102 · Lathe - cycle-controlled

          SAEILO - Dialog A-50 - - - 828D SL + ShopTurn Siemens

          Technical details
          turning diameter 500 mm︱turning length 1250 mm︱control 828D SL + ShopTurn Siemens︱greates pass round over bed 500 mm︱swing diameter over face slide 280 mm︱bed width mm︱turning speed range - main spindle max. 3000 U/min︱power capacity - main spindel 9/13 kW︱spindle bore 86 mm︱spindle head ︱diameter of quill 100 mm︱taper of center MK 5 ︱quill stroke 200 mm︱weight of the machine ca. 2,5 t︱dimensions 3,3 x 2,02 x 1,9 m︱
          Lathe cycle controled VDF BOEHRINGER - DUS 560 / 3000
            turning diameter 500 mm
            turning length 1250 mm
            control 828D SL + ShopTurn Siemens
            greates pass round over bed 500 mm
            swing diameter over face slide 280 mm
            turning speed range - main spind. max. 3000 U/min
            power capacity - main spindel 9/13 kW
            spindle bore 86 mm
            diameter of quill 100 mm
            taper of center MK 5
            quill stroke 200 mm
            weight of the machine ca. 2,5 t
            dimensions 3,3 x 2,02 x 1,9 m
            Description :
            Lathe cycle controled
            VDF BOEHRINGER - DUS 560 / 3000


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WMW-NILES DP 4000 DP 5000


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-11948C · Lathe - cycle-controlled

          WMW-NILES - DP 4000 DP 5000 - - -

          Technical details
          centre distance 5000 mm︱turning diameter over bed 4000 mm︱turning dia. in gap 5000 mm︱spindle bore 104 mm︱turning speeds 1,4 - 71 (18x) U/min︱total power requirement 30 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          4-jaw face plate Ø 3.150 mm modular lathe!
            centre distance 5000 mm
            turning diameter over bed 4000 mm
            turning dia. in gap 5000 mm
            spindle bore 104 mm
            turning speeds 1,4 - 71 (18x) U/min
            total power requirement 30 kW
            Description :
            4-jaw face plate Ø 3.150 mm
            modular lathe!


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WOHLENBERG PT1 U1070 S111


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-11994CE · Lathe - cycle-controlled

          WOHLENBERG - PT1 U1070 S111 - - - Alan Bradley 9-series

          Technical details
          centre distance 8500 mm︱turning diameter over bed 1070 mm︱turning diameter over slide rest 800 mm︱spindle bore 128 mm︱turning speeds 1,12 - 1120 U/min︱Control Alan Bradley 9-series ︱total power requirement 62 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          3 Shear Bed, Carriage can bypass Steady Rest and Tailstock 6-position Sauter Turret 360 mm Capacity Self Centering Hydraulic Steady Rest 385 mm Capacity Rotaring Work Support (Used for Gun Barrels) 800 mm 4-Jaw Chuck Tailstock Quill diameter Ø 200 mm Tailstock Taper M.T. 6 Chip Conveyor
            centre distance 8500 mm
            turning diameter over bed 1070 mm
            turning diameter over slide rest 800 mm
            spindle bore 128 mm
            turning speeds 1,12 - 1120 U/min
            Control Alan Bradley 9-series
            total power requirement 62 kW
            Description :
            3 Shear Bed, Carriage can bypass Steady Rest and Tailstock
            6-position Sauter Turret
            360 mm Capacity Self Centering Hydraulic Steady Rest
            385 mm Capacity Rotaring Work Support (Used for Gun Barrels)
            800 mm 4-Jaw Chuck
            Tailstock Quill diameter Ø 200 mm
            Tailstock Taper M.T. 6
            Chip Conveyor



        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled PADOVANI Labor E 300


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12109C · Lathe - cycle-controlled

          PADOVANI - Labor E 300 - - - Siemens 805

          Technical details
          turning diameter 720 mm︱turning length 4000 mm︱control Siemens 805 ︱turn - diameter over facing slide 360 mm︱spindle diameter 100 mm︱spindle passage 100 mm︱3-jaw-chuck diameter 400 mm︱4-jaw-chuck diameter 250 mm︱steady 360 mm︱total power requirement 22 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          3- jaw chuck diameter: 400 mm 4- jaw chuck diameter: 250 mm Fixed bezel diameter: 360 mmIncludes: 4 jaw turrets and coolant.
            turning diameter 720 mm
            turning length 4000 mm
            control Siemens 805
            turn - diameter over facing slid. 360 mm
            spindle diameter 100 mm
            spindle passage 100 mm
            3-jaw-chuck diameter 400 mm
            4-jaw-chuck diameter 250 mm
            steady 360 mm
            total power requirement 22 kW
            Description :
            3- jaw chuck diameter: 400 mm 4- jaw chuck diameter: 250 mm Fixed bezel diameter: 360 mmIncludes: 4 jaw turrets and coolant.


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled GILDEMEISTER NEF 710


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03709 · Lathe - cycle-controlled

          GILDEMEISTER - NEF 710 - - - Heidenhain

          Technical details
          turning diameter 710 mm︱turning length 2000 mm︱control Heidenhain ︱type Manuel Plus ︱turning diameter over slide 410 mm︱x-travel 385 mm︱turning speeds 9-1800 U/min︱transmission ratio 2 ︱drive capacity - workpiece 22 kW︱Torque 2500 Nm︱spindle diameter 160 mm︱spindle passage 92 mm︱total power requirement 49 KVA︱weight of the machine ca. 5,6 t︱dimensions of the machine ca. 5x2x2,2 m︱
          The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale; it apply only our business and conditions of sale. About Us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us.
            turning diameter 710 mm
            turning length 2000 mm
            control Heidenhain
            type Manuel Plus
            turning diameter over slide 410 mm
            x-travel 385 mm
            turning speeds 9-1800 U/min
            transmission ratio 2
            drive capacity - workpiece 22 kW
            Torque 2500 Nm
            spindle diameter 160 mm
            spindle passage 92 mm
            total power requirement 49 KVA
            weight of the machine ca. 5,6 t
            dimensions of the machine ca. 5x2x2,2 m
            Description :
            The tech. Data are manufacturer or operator information and therefore for us
            not binding. We reserve the right to prior sale; it apply
            only our business
            and conditions of sale.

            About Us
            more than 400 own machines in stock
            over 12000 m² storage area, crane capacity 70 t
            more than 10000 articles accessories for your workshop
            You want to sell machines, production lines or your company,
            Then contact us.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled MONFORTS KNC 8 2000


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03735 · Lathe - cycle-controlled

          MONFORTS - KNC 8 2000 - - - Monfort R&D

          Technical details
          turning diameter 800 mm︱turning length 2000 mm︱control Monfort R&D ︱turning diameter over slide 520 mm︱spindle hollow 88 mm︱total power requirement 53 kW︱weight of the machine ca. t︱dimensions of the machine ca. 4,2x2,2x1,9 m︱
            turning diameter 800 mm
            turning length 2000 mm
            control Monfort R&D
            turning diameter over slide 520 mm
            spindle hollow 88 mm
            total power requirement 53 kW
            dimensions of the machine ca. 4,2x2,2x1,9 m


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled BOEHRINGER DNE 820/DL 5000


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03440 · Lathe - cycle-controlled

          BOEHRINGER - DNE 820/DL 5000 - - - B2T

          Technical details
          turning diameter 820 mm︱turning length 5000 mm︱turning diameter over slide 460 mm︱control B2T ︱max. torque on the spindle 3400 Nm︱turning speeds 5,6-1120 U/min︱Feed 1-5000 mm/min︱Rapid movement 5000 mm/min︱tailstock quill taper MT 6 ︱3 jaw chuck Forckrath 630 mm︱steady 525 mm︱steady 335 mm︱main drive motor 50 kW︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter 820 mm
            turning length 5000 mm
            turning diameter over slide 460 mm
            control B2T
            max. torque on the spindle 3400 Nm
            turning speeds 5,6-1120 U/min
            Feed 1-5000 mm/min
            Rapid movement 5000 mm/min
            tailstock quill taper MT 6
            3 jaw chuck Forckrath 630 mm
            steady 525 mm
            steady 335 mm
            main drive motor 50 kW
            Description :



        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SAEILO CONTUR Dialog HS-71


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78103 · Lathe - cycle-controlled

          SAEILO - CONTUR Dialog HS-71 - - - 840D SL + ShopTurn Siemens

          Technical details
          turning diameter 720 mm︱turning length 2000 mm︱control 840D SL + ShopTurn Siemens︱greates pass round over bed 720 mm︱swing diameter over face slide 460 mm︱bed width 433 mm︱turning speed range - main spindle max. 2.500 U/min︱power capacity - main spindel 18,5 kW︱spindle bore 120 mm︱spindle head D 1-8 ︱diameter of quill 100 mm︱taper of center MK 5 ︱quill stroke 200 mm︱weight of the machine ca. 6,1 t︱dimensions 4,3 x 2,35 x 2,15 m︱
          Lathe cycle controled VDF BOEHRINGER - DUS 560 / 3000
            turning diameter 720 mm
            turning length 2000 mm
            control 840D SL + ShopTurn Siemens
            greates pass round over bed 720 mm
            swing diameter over face slide 460 mm
            bed width 433 mm
            turning speed range - main spind. max. 2.500 U/min
            power capacity - main spindel 18,5 kW
            spindle bore 120 mm
            spindle head D 1-8
            diameter of quill 100 mm
            taper of center MK 5
            quill stroke 200 mm
            weight of the machine ca. 6,1 t
            dimensions 4,3 x 2,35 x 2,15 m
            Description :
            Lathe cycle controled
            VDF BOEHRINGER - DUS 560 / 3000


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled PADOVANI Labor E 300


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-V0171 · Lathe - cycle-controlled

          PADOVANI - Labor E 300 - - - Siemens 805

          Technical details
          turning diameter 720 mm︱turning length 4000 mm︱control Siemens 805 ︱turn - diameter over facing slide 360 mm︱spindle diameter 100 mm︱spindle passage 100 mm︱3-jaw-chuck diameter 400 mm︱4-jaw-chuck diameter 250 mm︱steady 360 mm︱total power requirement 22 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          3- jaw chuck diameter: 400 mm 4- jaw chuck diameter: 250 mm Fixed bezel diameter: 360 mmIncludes: 4 jaw turrets and coolant.
            turning diameter 720 mm
            turning length 4000 mm
            control Siemens 805
            turn - diameter over facing slid. 360 mm
            spindle diameter 100 mm
            spindle passage 100 mm
            3-jaw-chuck diameter 400 mm
            4-jaw-chuck diameter 250 mm
            steady 360 mm
            total power requirement 22 kW
            Description :
            3- jaw chuck diameter: 400 mm 4- jaw chuck diameter: 250 mm Fixed bezel diameter: 360 mmIncludes: 4 jaw turrets and coolant.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled MONFORTS KNC5-1500


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03704 · Lathe - cycle-controlled

          MONFORTS - KNC5-1500 - - - Monforts MTCK

          Technical details
          turning diameter 555 mm︱turning length 1500 mm︱turning diameter over slide 290 mm︱3-jaw-chuck diameter 315 mm︱make Röhn ︱control Monforts MTCK︱quick change tool holder Multifix C ︱steady ︱turning speeds 2-2800 U/min︱transmission ratio 3 ︱face slide travel 235 mm︱spindle passage 70 mm︱tailstock quill taper MT 5 ︱total power requirement kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2,9x1,6x1,8 m︱
          The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale; it apply only our business and conditions of sale. About Us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us.
            turning diameter 555 mm
            turning length 1500 mm
            turning diameter over slide 290 mm
            3-jaw-chuck diameter 315 mm
            make Röhn
            control Monforts MTCK
            quick change tool holder Multifix C
            turning speeds 2-2800 U/min
            transmission ratio 3
            face slide travel 235 mm
            spindle passage 70 mm
            tailstock quill taper MT 5
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2,9x1,6x1,8 m
            Description :
            The tech. Data are manufacturer or operator information and therefore for us
            not binding. We reserve the right to prior sale; it apply
            only our business
            and conditions of sale.

            About Us
            more than 400 own machines in stock
            over 12000 m² storage area, crane capacity 70 t
            more than 10000 articles accessories for your workshop
            You want to sell machines, production lines or your company,
            Then contact us.




        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled CONTUR DIALOG H-66


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-8360 · Lathe - cycle-controlled

          CONTUR - DIALOG H-66 - - - SIEMENS 840 D + SHOPTURN

          Technical details
          turning diameter 660 mm︱turning length / mm︱control SIEMENS 840 D + SHOPTURN 660 mm︱ 400 mm︱ 105 mm︱ 2 /min︱ 2500 /min︱ 2 18.8 kW︱ 21000 Nm︱ 5 mm/min︱ 3200 mm/min︱ 5 mm/min︱ 3200 mm/min︱ 8000 mm/min︱ 8000 mm/min︱
            turning diameter 660 mm
            turning length / mm
            control SIEMENS 840 D + SHOPTURN
            660 mm
            400 mm
            105 mm
            2 /min
            2500 /min
            2
            18.8 kW
            21000 Nm
            5 mm/min
            3200 mm/min
            5 mm/min
            3200 mm/min
            8000 mm/min
            8000 mm/min


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled Narvik CD 460TI


          • Valk Machines BV
          • Kadijk 6
          • 8531XD Lemmer
          • Niederlande

          • +31 514562904
          • sales@valkmachines.com
            www.valkmachines.com
          #2079-066 · Lathe - cycle-controlled

          Narvik - CD 460TI - - - Fagor 8055

          Technical details
          turning diameter over bed 460 mm︱turning diameter over slide rest 288 mm︱centre distance 1000 mm︱spindle bore diameter 52 mm︱turning speed range 2500 U/min︱tool taper 8x positions Turret︱total power requirement 10 kW︱weight of the machine ca. 2 t︱required space 2400x1200x1350 mm︱
            turning diameter over bed 460 mm
            turning diameter over slide rest 288 mm
            centre distance 1000 mm
            spindle bore diameter 52 mm
            turning speed range 2500 U/min
            tool taper 8x positions Turret
            total power requirement 10 kW
            weight of the machine ca. 2 t
            required space 2400x1200x1350 mm


        • Valk Machines BV
        • Kadijk 6
        • 8531XD Lemmer
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled ZMM LS 600 M


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2118 · Lathe - cycle-controlled

          ZMM - LS 600 M - - -

          Technical details
          neuca. 4 Monate ab AuftragseBulgarien68840 €︱ 1383.68 €︱ 600 mm︱ 1500 mm︱ 300 mm︱ 80 mm︱ 400 mm︱ 400 mm︱ 890 M︱ 320 - 100, 80 - 400, 400 - U/Min︱ max. 8 m/min︱ max. 8 m/min︱ 290 mm︱ 90 mm︱ 5 MK︱
          Fast and simple communication between the operator and the lathe. Simple workpieces are machined in the same way as on the universal lathe, but more efficient. Complicated workpieces are machined in the same way as on the universal lathe, but faster. Complicated workpieces are machined in the same way as on the CNC lathe, but easier. Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven software leads the operator also without programming skills simple and fast to the finished workpiece. The interface is simple and with large icons, which is convenient in a specific work environment. The intuitive menu facilitates the transition to next screens and operations. Well visualized and structured cyclic operations,threads and steps. Possibility to set up the feeds, threads, etc. both mechanically and digitally (via the display). The manual, automatic and combined mode allows more precise operation compared to universal lathe. Easy transition from manual to automatic operation mode. ACCESSORIES: Siemens motor with Siemens Inverter (3 gear steps) CNC control Schneider Magelis Quick change tool post Amestra Multifix Typ C inkl. 4 Halter (3x Rechteck, 1 Rund) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm, max. 2500 r/min Spindle dead center Ball screw spindles for longitudinal and cross axes Coolant equipment Full length rear splash guard Spindle protection Splash guard for the chuck Levelling bols and shims Quick release tailstock Machine lamp Operating manual Machine according to "CE“ FURTHER TURNING LENGTHS: 1000 mm € 67.640,00 2000 mm € 70.240,00 3000 mm € 72.940,00 4000 mm € 75.840,00 5000 mm € 78.640,00
            neu
            ca. 4 Monate ab Auftragse
            Bulgarien
            68840 €
            1383.68 €
            600 mm
            1500 mm
            300 mm
            80 mm
            400 mm
            400 mm
            8
            90 M
            3
            20 - 100, 80 - 400, 400 - U/Min
            max. 8 m/min
            max. 8 m/min
            290 mm
            90 mm
            5 MK
            Description :
            Fast and simple communication between the operator and the lathe.
            Simple workpieces are machined in the same way as on the universal lathe, but more efficient.
            Complicated workpieces are machined in the same way as on the universal lathe, but faster.
            Complicated workpieces are machined in the same way as on the CNC lathe, but easier.
            Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven software
            leads the operator also without programming skills simple and fast to the finished workpiece.
            The interface is simple and with large icons, which is convenient in a specific work environment.
            The intuitive menu facilitates the transition to next screens and operations.
            Well visualized and structured cyclic operations,threads and steps.
            Possibility to set up the feeds, threads, etc. both mechanically and digitally (via the display).
            The manual, automatic and combined mode allows more precise operation compared to universal lathe.
            Easy transition from manual to automatic operation mode.

            ACCESSORIES:
            Siemens motor with Siemens Inverter (3 gear steps)
            CNC control Schneider Magelis
            Quick change tool post Amestra Multifix Typ C inkl. 4 Halter (3x Rechteck, 1 Rund)
            3-jaw chuck Bison 3204/DIN6350, Ø 250 mm, max. 2500 r/min
            Spindle dead center
            Ball screw spindles for longitudinal and cross axes
            Coolant equipment
            Full length rear splash guard
            Spindle protection
            Splash guard for the chuck
            Levelling bols and shims
            Quick release tailstock
            Machine lamp
            Operating manual
            Machine according to "CE“

            FURTHER TURNING LENGTHS:

            1000 mm

            67.640,00

            2000 mm

            70.240,00

            3000 mm

            72.940,00

            4000 mm

            75.840,00

            5000 mm

            78.640,00


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •