Flaring Cup Wheel Grinding Machine

5-125 mm︱ 50-1000 mm︱ 1000 mm︱ 1.9 KVA︱ 630 kg︱ 100 kg︱

---

workpiece diameter 110 mm︱grinding depth 60 mm︱clamping length 2500 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

workpiece diameter 100 mm︱grinding depth 50 mm︱clamping length 1000 mm︱total power requirement 0,5 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. m︱

---

workpiece diameter 8-125 mm︱grinding depth 130 mm︱clamping length 50-1100 mm︱max. workpiece diameter 0 mm︱min. workpiece diameter 0 mm︱workpiece length mm︱total power requirement 1 kW︱weight of the machine ca. 500 kg︱dimensions of the machine ca. m︱

---

T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400 _______________________________________________________ Distance between centres 50 – 1,100 mm Height of centres 145 mm Workpiece Ø 8 – 125 mm Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice 4 – 150 mm Stroke of grinding head 130 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Workpiece drive 0 rpm Total electrical load, approx. 0.5 kW - 380 V - 50 Hz Weight, approx. 500 kg Accessories / Special Features: * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. * The workpiece remains stationary, enabling the procuction of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw chuck which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering tool with carbide inserts. Manual adjustment of appropriate workpiece diameter with a rachet coupling. * Manual dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form. * Pre-centering device for Workpiece only partially available. * Height-adjustable tailstock and bore in machine base allow longer workpieces. Condition : average to good/should be reconditioned. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

workpiece diameter 125 mm︱grinding depth 50 mm︱clamping length 2000 mm︱total power requirement 0,5 kW︱weight of the machine ca. 1000 kg︱dimensions of the machine ca. m︱

---

T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278 _______________________________________________________ Distance between centres 50 – 2.000 mm Height of centres approx. 125 mm Workpiece Ø in clamping Vice 8 – 125 mm Swing of workpiece over tailstockguide 290 mm Swing of Workpiece max. over grinding head pillar 300 mm Max.weight of workpiece 250 kg Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 5 – 160 mm Grinding head adjustable in vertical axis 160 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Total electrical load, approx. 1 kW - 380 V - 50 Hz Weight, approx. 1.000 kg Accessories / Special Features Machine is suitable for workpiece length up to 2.000 mm with a basement extension * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. The workpiece remains stationary, enabling the generation of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw vice which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering vice with carbide inserts. Manual adjustment of appropriate workpiece diameter with clamping screw. * Dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form and with oscillation of diamond tool. * Pre-centering device for Workpiece adjustment between centers. * Pneumatic Oil Lubrification of grinding spindle by oil-mist. * Manually adjustable Tailstock with handwheel but without motorized drive. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

workpiece diameter 2 - 60 mm︱clamping range 4 - 220 mm︱workpiece length 50 - 1.100 mm︱workpiece weight max. 120 kg︱Angle 60 Grad︱grinding wheel speeds max. 45.000 U/min︱total power requirement - kW︱weight of the machine ca. 0,7 t︱dimensions of the machine ca. 1,0 x 1,0 x 2,0 m︱Documents ︱

---

Center Grinding Machine TECHNICA - ZSM 150

workpiece diameter 60 mm︱grinding depth 30 mm︱clamping length 1000 mm︱total power requirement kW︱weight of the machine ca. 0,6 t︱dimensions of the machine ca. 0,5 x 0,5 x 2,1 m︱

---

center hole 2-50 mm︱workpiece diameter 8-125 mm︱workpiece length - min. 50 mm︱workpiece length - max. 1000 mm︱column - center height 145 mm︱grinding wheel speeds: ︱number 3 ︱from/to 13000-45000 U/min︱spindle turning speed range 400 U/min︱dimensions of the machine ca. 750x850x1800 mm︱weight of the machine ca. 475 kg︱

---

workpiece diameter 30 - 325 mm︱grinding depth 60 mm︱clamping length 1000 mm︱center hole 1 - 30 mm︱total power requirement kW︱weight of the machine ca. 0,2 t︱dimensions of the machine ca. 0,5 x 0,5 x 1,7 m︱

---

workpiece diameter 150 mm︱grinding depth 5,0 mm︱workpiece length 1.100 mm︱grinding spindle speed 45.000 U/min︱voltage 380 V︱total power requirement 0,5 kW︱weight of the machine ca. 490 kg︱dimensions of the machine ca. 1,00 x 0,85 x 1,85 m︱suction device 0,40 x 0,75 x 0,60 m︱

---

- Serial-No.: J20720-89 - Machine ON: 3.680 h - Workpiece drive - Dressing device - Suction

gebraucht ︱ 2007 ︱ 5533 ︱ prompt, Zwischenverkauf v ︱ Italien ︱ 5460 €︱ 1 ︱ 178 x 78 x 78 mm︱ 2840 1/min︱ 250 x 150 mm︱ 2.2 kW︱ 830 mm︱ 750 mm︱ 1630 mm︱ 400 kg︱

---

Cooling Equipment Distance column axis - disc axis 300 mm Max. Distance table - grinding wheel 280 mm Max. Grinding surface 140 x 330 mm Quick feed / handwheel rotation: 2 mm Fine feed 0,01 mm Dimensions of the abrasive elements 50x16x90 mm no User Manual DOES NOT COMPLY WITH GERMAN UVV & AUSTRIAN AMVO

table-size 200x110 mm︱grinding height 230 mm︱cup wheel dimensions 150 mm︱weight of the machine ca. 130 kg︱dimensions of the machine ca. 650x550x1500 mm x mm x mm︱Grinding wheel flange: No 3 ︱Balancing arbor ︱

---

Magnetic table D-125mm Dressing attachment www.marcels-maschinen.ch

workpiece length 360 mm︱work piece width 155 mm︱workpiece height 280 mm︱range L-W-H 1.050 x 950 x 1.750 mm︱total power requirement 3,0 kW︱weight of the machine ca. 550 kg︱

---

Flaring Cup Wheel Grinding Machine - Horizontal / Brand: DELTA / Type: LF 350 Year of construction: approx. 2000 The machine can be inspected by appointment in the factory. Technical data: - Grinding length: 360 mm - Grinding width: 155 mm - Workpiece height: 280 mm - Spindle speeds: 2.840 rpm - Grinding wheel dimension: Ø 200 x 80 x 78 mm - Total power requirement: 3,0 KW - Machine weight approx.: 550 kg - Dimensions Length-Width-Height: 1.050 x 950 x 1.750 mm - Electric magnetic clamping plate: 200 x 300 x 75 mm - SD 20-30 Magnetic table - Instruction manual There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale.

workpiece length 610 mm︱work piece width 180 mm︱workpiece height 240 mm︱dia. of cup wheel 200 mm︱table-size Ø 280 mm︱spindle throat 250 mm︱spindle speed: 3000 U/min.︱voltage 380 V︱total power requirement 2,94 kW︱weight of the machine ca. 430 kg︱dimensions of the machine ca. 0,85 x 0,75 x 1,90 m︱

---

grinding length 500 mm︱grinding width 200 mm︱workpiece height 260 mm︱total power requirement 3 kW︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. 1,2 x 1,2 x 1,5 m︱

---

Universal Tool- and Surface Grinding Machine Dust Extraction, Tool Cabinet Workspace: 500 x 200 x 260

FS-D-NC 120200 | FS-D-NC ︱grinding length 2000 | 3000 | 4000 | 5000 mm︱grinding width 1200/1600 mm︱distance spindle nose and table 1000 (Option 1200) | 1000 mm︱max. table load 5200 | 6340 | 7600 | 8700 kg︱table-size 1200 (1600) x 2000 | 1200 mm︱table speeds 1~25 m/min︱table guideways V-Führung ︱automatic cross feed adjustable 0.1 - 40 mm/Hub︱rapid traverse cross 900 mm/min︱cross feed on handwheel (x1) 0.1/(x5) 0.5/(x10) 1 mm︱cross feed on handwheel (x1) 0.001/(x5) 0.005/(x1 mm︱rapid traverse vertical 300 mm/min︱autom. vertical feed 0.001 – 0.1 mm︱vertical feed on handwheel (x1) 0.1/(x5) 0.5/(x10) 1 mm︱vertical feed on handwheel (x1) 0.001/(x5) 0.005/(x1 mm︱spindle speed 1100 1/min︱dimensions of grinding wheel 508 x 50 x 203 mm︱spindle drive 15 (Option 22) kW︱drive motor for hydraulic pump 11 | 11 | 15 | 15 kW︱

---

FS-NC-50AHR | FS-NC-60AHR ︱grinding length 1020/1520/2020 mm︱grinding width 500 | 600 | 700 mm︱Distance spindle center to table 600 (Option 800, 1000) mm︱table surface area 500x1000/500x1500/500x200 mm︱table load capacity 800/1000/1000 | 1200/1400 kg︱table speed -stepless- 5-25 m/min︱Auto. cross feed increment 0,5~20 mm/min︱rapid traverse cross 900 mm/min︱autom. vertical feed 0,001~0,999 (Option) mm︱grinding wheel speeds 1450 U/min︱dimensions of grinding wheel 405x50x127 mm︱spindle drive 7,5 (Opt. 11) kW︱weight of the machine ca. 6000/7200/8400 | 6300/750 kg︱machine width/height 4600x2300 | 4600x2450 | 4 mm︱machine length 4600/4800/6000 mm︱grinding wheel ︱grinding wheel flange ︱grinding wheel extractor ︱ ︱

---

FSM 2550 | FSM 3060 | FSM ︱grinding length 500 | 600 | 800 mm︱grinding width 250 | 300 | 400 mm︱Distance table/spindle center 500 (Option 600) | 500 (O mm︱table-size 250x500 | 300x600 | 400x8 mm︱max. table load 250 | 300 | 400 kg︱table speed -stepless- 5-25 m/min︱rapid traverse cross 900 mm/min︱cross feed 0,1-20 mm︱cross feed on handwheel 5 mm/U︱vertical feed on handwheel 5 mm/U︱autom. vertical feed 0,005 | 0,01 | 0,01 mm︱vertical rapid traverse 450 mm/min︱vertical infeed, min. 0,001 mm︱dimensions of grinding wheel 200x20x31,75 | 355x38x127 mm︱spindle speed 2900 | 1450 | 1450 1/min︱spindle drive 1,5 | 3,7 | 3,7 kW︱hydraulic motor 0,75 | 0,75 | 1,5 kW︱weight of the machine ca. 1350 | 1700 | 3250 kg︱machine length 2250 | 2650 | 3000 mm︱

---

FS-C 80150/100150AHD | FS ︱grinding length 1500 | 2000 | 3000 | 4000 mm︱grinding width 800/1000 mm︱distance spindle nose and table 800 [Option: 1000] | 800 mm︱max. table load 800x1500 (2000kg)/1000x15 kg︱table-size 800/1000x1500|800/1000x20 mm︱table speeds 3?25 m/min︱table guideways V- und Flachführung ︱automatic cross feed adjustable 0.5?20 mm/Hub︱rapid traverse cross 900 mm/min︱cross feed on handwheel 5 (Umdrehung) / 0.02 (Gra mm︱rapid traverse vertical 240 mm/min︱autom. vertical feed 0.001 ~ 0,1 mm︱spindle speed 1450 1/min︱dimensions of grinding wheel 406 x 50.8 x 127 mm︱spindle drive 7,5 (11 Opt.) kW︱drive motor for hydraulic pump 5,5 | 7,5 | 7,5 | 11 kW︱weight of the machine ca. 12800/13800 | 14300/15300 kg︱Machine size 516x 240/266x256 | 626x 2 cm︱autom. vertical feed ︱

---

Optimal 2550 | 3060 | 408 ︱grinding length 500 | 600 | 800 | 1000 mm︱grinding width 250 | 300 | 400 | 400 mm︱Distance table/spindle center 450 | 580 | 580 | 580 mm︱table-size 250x500 | 300x600 | 400x8 mm︱max. table load 180 | 270 | 500 | 600 kg︱table speed -stepless- 7-25 m/min︱longitudinal travel 560 | 765 | 910 | 1130 mm︱rapid traverse cross 990 mm/min︱cross travel 275 | 340 | 450 | 450 mm︱rapid traverse vertical 460 m/min︱dimensions of grinding wheel 200x20x31,75 | 350x40x127 mm︱spindle speed 2850 | 1450 | 1450 | 1450 1/min︱spindle drive 2,2 | 5,5 | 5,5 | 5,5 kW︱weight of the machine ca. 1800 | 2600 | 3500 | 4000 kg︱machine length 2300 | 2900 | 3600 | 4400 mm︱machine width 1650 | 2200 | 2400 | 2400 mm︱Machine height 1680 | 1900 | 1900 | 1900 mm︱grinding wheel ︱grinding wheel flange ︱

---

FS 2550 ADP | FS 3060 ADP ︱grinding length 500 | 600 | 800 mm︱grinding width 250 | 300 | 400 mm︱Distance table/spindle center 500 (Option 600) | 500 (O mm︱table-size 250x500 | 300x600 | 400x8 mm︱max. table load 250 | 300 | 400 kg︱table speed -stepless- 5-25 m/min︱rapid traverse cross 900 mm/min︱cross feed on handwheel 0,1/0,5/1 mm/U; 0,001/0,0 ︱vertical feed on handwheel 0,1/0,5/1 mm/U; 0,001/0,0 ︱vertical rapid traverse 450 mm/min︱vertical infeed, min. 0,001 mm︱dimensions of grinding wheel 180x13x31,75 | 355x38x127 mm︱spindle speed 2900 | 1450 | 1450 1/min︱spindle drive 1,5 | 3,7 | 3,7 kW︱hydraulic motor 0,75 | 1,5 | 1,5 kW︱weight of the machine ca. 2350 | 2500 | 3700 kg︱machine length 2680 | 3000 | 3300 mm︱machine width 2350 | 2350 | 2650 mm︱SPS machine control ︱

---

Optimized Structure – The major parts of KRAFT grinders are manufactured from high quality cast iron combined with an outstanding structural design by Finite Element Analysis (FEA). Major parts are stress relieved to ensure maximun rigidity, stability and machining accuracy. 2. Turcite-B on Slideways – The X and Z axes slideways are coated with Turcite-B for stable movement and long term accuracy. 3. Precision Spindle Design – The spindle runs in a class P4 high precision angular contact bearing, assuring run-out accuracy in 2 µm. The cartridge-type spindle is completely sealed and lubricated for long working lifetime, provideing high accuracy grinding and a long service life. 4. X axis driven by Stepless Variable Proportional Valve Hydraulic System – Allowing for feed speed adjustment according to the workpiece type for increased convenience of operation. 5. Y & Z axes driven by AC servomotor + MPG hand wheel – Providing high accuracy and convenient operating. 6. Semi enclosed splash shield (ride side open) – More safty and more cleaning. 7. Cross stroke adjustment for X & Z axes – Travel setting by joystick, more convenient. 8. Spindle motor inverter – Variable spindle speed adjustment for different material. 9. Auto dressing and compensation (Diamond dresser on the table) function for increasing more processing efficiency. 10. Grinding mode : Surface, Crisscross, Plunge , and Pitch (same pitch and same depth). 11. Position display (for Y & Z axes). 12. 10” LCD touch screen panel (PLC controller) and Graphical HMI Interface. Operating more easier, friendly and efficiency. 13. [Option] Auto balancing system – Providing superior grinding accuracy and finishing. 14. [Option] NC Auto parallel dressing and compensating device (over spindle head) function for increasing more processing efficiency and saving grinding time.

gebraucht ︱ 2019 ︱ 5538 ︱ prompt, Zwischenverkauf v ︱ Taiwan ︱ 47800 €︱ 1 ︱ 630 mm︱ 1000 x 400 mm︱ 1000 mm︱ 1000 x 400 mm︱ 1050 mm︱ 11000 mm︱ 5 - 25 m/min︱ 0 - 2250 mm/min︱ 0,001 mm︱ 405 mm︱ 0,001 - 0,04 mm︱ 675 mm/min︱ 0.001 mm︱

---

8" grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list Aut. vertical feed Servo drive for grinding wheel feed and table cross feed Hardened slide ways in all 3 axes with roller bearings Grinding wheel spindle on 4 high precision angular contact bearings Electro-magnetic chuck Coolant equiptment with aut. paper filter and magnetic separator Over the wheel automatic dressing device with automatic compensation Grinding wheel Grinding wheel flange Grinding wheel balancing scale Balance arbor LED machine lamp Machine and equipment according to the CE-regulations User manual in ENGLISH and GERMAN

gebraucht ︱ 2015 ︱ 5413 ︱ prompt, Zwischenverkauf v ︱ China ︱ 14400 €︱ 11520 €︱ 1 ︱ 450 mm︱ 600 x 254 mm︱ 600 mm︱ 508 x 254 mm︱ 180 kg︱ 2850 1/min︱ 2.2 kW︱ 2200 mm︱ 1800 mm︱ 1850 mm︱ 1800 kg︱ 200 x 20 x 312 mm︱

---

2-axes digital read-out grinding wheel with flange wheel balance arbour electro-magnetic chuck hydraulic longitudinal feed automatic cross feed automatic vertical feed automatic demagnetiser man. parallel wheel dressing device coolant device separate hydraulic unit aut. central lubrication dressing diamond operator tools machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH

gebraucht ︱ 2006 ︱ 5539 ︱ Mai 2024, Zwischenverkauf ︱ Taiwan ︱ 49600 €︱ 1 ︱ 850 mm︱ 1000 x 610 mm︱ 1000 mm︱ 1000 x 600 mm︱ 1000 mm︱ 5 - 25 m/min︱ 1250 mm/min︱ 3 - 32 mm︱ 0.02 ︱ 400 mm/min︱ 0.001 mm︱ 1450 1/min︱ 11 kW︱

---

Servo drive for grinding wheel feed, hardened and grounded slide ways Grinding wheel spindle on 6 high precision angular contact bearings Electro-magnetic chuck Coolant equiptment with aut. paper filter and magnetic separator Over the wheel automatic dressing device (with automatic compensation) Grinding wheel Grinding wheel flange machine lamp Machine and equipment according to the CE-regulations User manual in ENGLISH NEW GRINDING SPINDLE, SPINDLE BEARINGS AND GRINDING WHEEL