,

Bitte einen Suchbegriff eingeben - Unesite pojam za pretraživanje
Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:

          Presses

          Machinelist: Presses


          bending press

          used Presses bending press LOTZE PZ 100


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3744 · bending press

          LOTZE - PZ 100 - - 1982 - DNC 73 PC

          Technical details
          pressure 100 t︱distance between columns 2540 mm︱chamfer lenght 3500 mm︱table height over floor 760 mm︱stroke 150 mm︱control DNC 73 PC ︱total power requirement 11 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. 4,1x1,7x2,9 m︱
            pressure 100 t
            distance between columns 2540 mm
            chamfer lenght 3500 mm
            table height over floor 760 mm
            stroke 150 mm
            control DNC 73 PC
            total power requirement 11 kW
            weight of the machine ca. 8 t
            dimensions of the machine ca. 4,1x1,7x2,9 m


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact

          Double-Column Presse

          used Presses Double-Column Presse DIEFFENBACHER PO 2000 (1000)


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-903 · Double-Column Presse

          DIEFFENBACHER - PO 2000 (1000) - - 1978 -

          Technical details
          pressure 2000 /1000* t︱distance between columns 2650 mm︱stroke 500 mm︱column travel -side 500 x 1000 mm︱diameter of piston 710 mm︱number of pistons 2 ︱distance between table / ram 1000 mm︱operating pressure 130 / 230 bar︱dayligth 800 mm︱table length 2500 mm︱table width 1600 mm︱table height 250 mm︱draw back pressure 500 kN︱number of T-slots 8 ︱turning speeds 1500 U/min︱rapid speed 120 - 140 mm/min︱closing speed max. 120 - 140 mm/sec.︱return of plunger by small single cylinders 100 - 110 mm/sec︱hydraulical ram locking ︱cutting sound absorber 300 t︱
          1991 assembly of a die cushion, pressure reduction to 1000 tons reason: tools were only constructed to 1000 tons press has run in a perfect condition until disassembly. It was replaced by a press line. important for UVV: press has a hydraulic ram locking!
            pressure 2000 /1000* t
            distance between columns 2650 mm
            stroke 500 mm
            column travel -side 500 x 1000 mm
            diameter of piston 710 mm
            number of pistons 2
            distance between table / ram 1000 mm
            operating pressure 130 / 230 bar
            dayligth 800 mm
            table length 2500 mm
            table width 1600 mm
            table height 250 mm
            draw back pressure 500 kN
            number of T-slots 8
            turning speeds 1500 U/min
            rapid speed 120 - 140 mm/min
            closing speed max. 120 - 140 mm/sec.
            return of plunger by small singl. 100 - 110 mm/sec
            cutting sound absorber 300 t
            Description :
            1991 assembly of a die cushion, pressure reduction to 1000 tons
            reason: tools were only constructed to 1000 tons
            press has run in a perfect condition until disassembly. It was replaced by a press line.

            important for UVV: press has a hydraulic ram locking!




        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact

          Eccentric Press - Single Column

          used Presses Eccentric Press - Single Column HIW HELMERDING ERH 110 B


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3750 · Eccentric Press - Single Column

          HIW HELMERDING - ERH 110 B - - 1986/2014 -

          Technical details
          pressure 110 t︱throat 290 mm︱stroke 20-124 mm︱no. of strokes 60 / 90 Hub/min︱ram adjustment 85 mm︱table surface area ca. 920 x 590 mm︱ram surface ca. 530 x 280 mm︱distance table to upper part of the press ca. 450 mm︱hole in the table ca. 180 x 300 mm mm︱table height ca. 750 mm︱tool hole in ram Ø 50 mm︱Number of working hours 8214 h︱distance table to upper part of the press mm︱weight of the machine ca. 5,5 t︱dimensions ca. 2000 x 2000 x 2600 mm︱
          overhauled by the manufacturer Helmerding in 2014 including conversion to new ones press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control
            pressure 110 t
            throat 290 mm
            stroke 20-124 mm
            no. of strokes 60 / 90 Hub/min
            ram adjustment 85 mm
            table surface area ca. 920 x 590 mm
            ram surface ca. 530 x 280 mm
            distance table to upper part of . ca. 450 mm
            hole in the table ca. 180 x 300 mm mm
            table height ca. 750 mm
            tool hole in ram Ø 50 mm
            Number of working hours 8214 h
            weight of the machine ca. 5,5 t
            dimensions ca. 2000 x 2000 x 2600 mm
            Description :
            overhauled by the manufacturer Helmerding in 2014 including conversion to new ones
            press safety control.
            Operating hours read since overhaul in 2014: 8214

            Documentation of press safety control available

            electrical grease central lubrication
            Hydraulic clutch-brake combination
            Mechanical break plate in the ram
            two-hand operation
            foot control


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact

          Spotting Press

          used Presses Spotting Press MILUTENSIL BV 26


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3610 · Spotting Press

          MILUTENSIL - BV 26 - - 1989 -

          Technical details
          pressure 30 t︱table length 1100 mm︱table width 750 mm︱table height 850 mm︱dayligth min/max 320/ 920 mm︱closing pressure 30 t︱opening capacity 40 t︱table load oben 1200 kg︱table load unten 4000 kg︱weight of the machine ca. 2800 t︱dimensions of the machine ca. 1900 x 1700 x 2200 mm︱
            pressure 30 t
            table length 1100 mm
            table width 750 mm
            table height 850 mm
            dayligth min/max 320/ 920 mm
            closing pressure 30 t
            opening capacity 40 t
            table load oben 1200 kg
            table load unten 4000 kg
            weight of the machine ca. 2800 t
            dimensions of the machine ca. 1900 x 1700 x 2200 mm


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact

          Straightening Press - Double Column

          used Presses Straightening Press - Double Column LÄPPLE Sockel LC


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-2875 · Straightening Press - Double Column

          LÄPPLE - Sockel LC - - 2006 - Siemens Simatic S7 400

          Technical details
          pressure 50 t︱distance between columns 2700 mm︱stroke 800 mm︱measuring system Absolutwertgeber ︱control Siemens Simatic S7 400 ︱table length 2500 mm︱table width 1600 mm︱ 150 ︱table height 1320 mm︱work height max. 1580 mm︱ 800 ︱total power requirement 15 kW︱
          Tool clamping upper and lower part: screwed manual tool change
            pressure 50 t
            distance between columns 2700 mm
            stroke 800 mm
            measuring system Absolutwertgeber
            control Siemens Simatic S7 400
            table length 2500 mm
            table width 1600 mm
            150
            table height 1320 mm
            work height max. 1580 mm
            800
            total power requirement 15 kW
            Description :
            Tool clamping upper and lower part: screwed
            manual tool change


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact

          Wobbling and Riveting Machine

          used Presses Wobbling and Riveting Machine STEINEL VS


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3795 · Wobbling and Riveting Machine

          STEINEL - VS - - 1983 -

          Technical details
          useable stroke 30 mm︱rivet shank max max. Ø 6 mm︱throat 130 mm︱spindle turning speed range 1400 U/min︱quill stroke 45 mm︱table surface area 284 x 235 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Roll riveting machine with safety device for low-noise rolling riveting of all types of rivet heads. The rivet stopper is mounted at an angle in the roll rivet head on roller bearings so that it can tumble freely regardless of the rotation of the head. Fast and powerful movement of the roller rivet head thanks to a directly pressurized compressed air cylinder. Force requirements can be adjusted steplessly. Manual availbale
            useable stroke 30 mm
            rivet shank max max. Ø 6 mm
            throat 130 mm
            spindle turning speed range 1400 U/min
            quill stroke 45 mm
            table surface area 284 x 235 mm
            Description :
            Roll riveting machine with safety device for low-noise rolling riveting of all
            types of rivet heads. The rivet stopper is mounted at an angle in the roll
            rivet head on roller bearings so that it can tumble freely regardless of the
            rotation of the head. Fast and powerful movement of the roller rivet head
            thanks to a directly pressurized compressed air cylinder. Force requirements
            can be adjusted steplessly.

            Manual availbale


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Find the perfect presses for your needs at LagerMaschinen
          Presses are multi-function tools for home or business

          The umbrella term press encompasses a wide range of different machines with an enormous array of functions. Presses can be used for the shaping, cutting, and punching of a variety of different materials. Whether youre in the market for a small manually-operated press for your home workshop or a massive industrial press for your business, you can easily find the most suitable machine for your specifications quickly and easily using LagerMaschinens online marketplace of used machines.

          Find the right used machines for you at LagerMaschinen

          From the publishing industry to the automotive sector, presses play a crucial role in the forming and finishing of products. Presses can be used to shape heavy material, imprint papers and plastic or cut and form metal, such as in coin production. For control and precision, look for used manually-operated presses. For mass-production, CNC operated presses offer quality and efficiency. No matter what your needs are, you can find used presses and more at LagerMaschinen.

          Investing in used machines is a business-savvy plan

          Buying used machines is a practical solution to the budgetary woes of buying equipment for your home or business. When you invest in used machines you get the quality you demand as a price you can afford. The machine marketplace offered by LagerMaschinen is a user-friendly forum for buying and selling used machines. Presses, lathes, grinders and more can be searched for and filtered by location, price or brand, ensuring a hassle-free shopping process from the comfort of your home or office.