,

Bitte einen Suchbegriff eingeben - Unesite pojam za pretraživanje
Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Decoilers for Coils

          used Sheet metal working / shaeres / bending Decoilers for Coils UNGERER HSSH y 16/490


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-7696 · Decoilers for Coils

          UNGERER - HSSH y 16/490 - - überh./rev. 2006 -

          Technical details
          sheet width - max. 1600/1780 mm︱coil weight 5,00 t︱coil internal dia. 508 mm︱height of the drum over the floor ca. 1150 mm︱total power requirement kW︱weight of the machine ca. 5,50 t︱dimensions of the machine ca. m︱
          Equipment: - Substructure frame - hydraulic - Hydraulic spread - Pressure arm hydraulic - Pressing roller driven - Brake / disc brake - hydraulic Hydraulics not available Dimensions (L x W x H): reel: approx. 3,740 x 1,470 x 1,520 mm Substructure frame: approx. 1,760 x 960 x 600 mm
            sheet width - max. 1600/1780 mm
            coil weight 5,00 t
            coil internal dia. 508 mm
            height of the drum over the floo. 1150 mm
            weight of the machine ca. 5,50 t
            Description :
            Equipment:
            - Substructure frame - hydraulic
            - Hydraulic spread
            - Pressure arm hydraulic
            - Pressing roller driven
            - Brake / disc brake - hydraulic

            Hydraulics not available

            Dimensions (L x W x H): reel: approx. 3,740 x 1,470 x 1,520 mm
            Substructure frame: approx. 1,760 x 960 x 600 mm


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Decoilers for Coils UNGERER HSSHy 1600/490/5,5


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-01583 · Decoilers for Coils

          UNGERER - HSSHy 1600/490/5,5 - - 1982/überh./rev.2006 -

          Technical details
          Coil Weight 5,5 t︱Mandrel Length 1.600 (1.780) mm︱coil inside diameter 508 mm︱clamping range 465 - 510 mm︱Height Floor - Middle of Mandrel app. 1.150 mm︱Machine Weight app. 5,5 t︱Required Space app. m︱
          accessories base frame expanding process - hydraulically press arm - hydraulically press roll - motor driven brake disc brake – hydraulically hydraulic unit not available dimensions (l x w x h): decoiler: app. 3.740 x 1.470 x 1.520 mm base frame: app. 1.760 x 960 x 600 mm
            Coil Weight 5,5 t
            Mandrel Length 1.600 (1.780) mm
            coil inside diameter 508 mm
            clamping range 465 - 510 mm
            Height Floor - Middle of Mandrel. 1.150 mm
            Machine Weight app. 5,5 t
            Description :
            accessories
            base frame
            expanding process - hydraulically
            press arm - hydraulically
            press roll - motor driven
            brake disc brake – hydraulically

            hydraulic unit not available

            dimensions (l x w x h):
            decoiler: app. 3.740 x 1.470 x 1.520 mm
            base frame: app. 1.760 x 960 x 600 mm


        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

        • Datasheet
          Request / Contact

          Roller leveller

          used Sheet metal working / shaeres / bending Roller leveller UNGERER 1800/2,25/23


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-0614 · Roller leveller

          UNGERER - 1800/2,25/23 - - -

          Technical details
          Material Width 1.650 mm︱Material Thickness 0,50-2,00 mm︱No. Levelling Rolls 23 ︱Levelling Roll Diameter 53,6 mm︱distance between stands 1.750 mm︱length of rolls 1.820 mm︱total power requirement 58 kW︱speed app. m/min︱Required Space app. 6,00x3,00x2,90 m︱Machine Weight app. 19,60 t︱
          daylight width (distance between stands) app. 1.750 mm no. - support blocks 14 (7 x above / 7 x below) with support rolls no. - support rolls 175 (84 x above / 91 x below) support roll – Ø app. 112 mm power – main motor 55 kW height adjustment motor driven tilting adjustment motor driven support block adjustment (below) mechanically/manually and individually adjustable 1 set leveling rolls (spare part) Ø 53,68 mm central grease lubrication of bearing rails circulating oil lubrication of drive and drive shafts control unit - not available all motors: main motor (NEW), swivel motor, motor for height adjustment and oil pump are provisionally equipped with a connection cable. For the swivel motor and motor for height adjustment a 24 V transformer is needed - for the brake.
            Material Width 1.650 mm
            Material Thickness 0,50-2,00 mm
            No. Levelling Rolls 23
            Levelling Roll Diameter 53,6 mm
            distance between stands 1.750 mm
            length of rolls 1.820 mm
            total power requirement 58 kW
            Required Space app. 6,00x3,00x2,90 m
            Machine Weight app. 19,60 t
            Description :
            daylight width (distance between stands) app. 1.750 mm

            no. - support blocks 14 (7 x above / 7 x below) with support rolls
            no. - support rolls 175 (84 x above / 91 x below)
            support roll – Ø app. 112 mm
            power – main motor 55 kW
            height adjustment motor driven
            tilting adjustment motor driven
            support block adjustment (below) mechanically/manually and individually
            adjustable
            1 set leveling rolls (spare part) Ø 53,68 mm
            central grease lubrication of bearing rails
            circulating oil lubrication of drive and drive shafts
            control unit - not available
            all motors:
            main motor (NEW), swivel motor, motor for height adjustment and oil pump
            are provisionally equipped with a connection cable.
            For the swivel motor and motor for height adjustment a 24 V transformer is
            needed - for the brake.


        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller UNGERER RA 600/4,5/17


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-06043 · Roller leveller

          UNGERER - RA 600/4,5/17 - - -

          Technical details
          Material Width 400 mm︱Material Thickness 0,40 - 4,00 mm︱No. Levelling Rolls 17 ︱leveling roll diameter app. 68 (69) mm︱distance between stands 580 mm︱total power requirement 20 kW︱Required Space app. m︱Machine Weight app. t︱
          LEVELER WITH DRIVE adjustment: mechanically tilting: mechanically support: 1 x mechanically number - support rolls: 18 ( 9 x above / 9 x below) support roll diameter: 130 mm pneumatical ventible length measuring roll mounted on frame construction electrical drive power: 20 kW accessories: toggle lever shear as cut to length shear knife length: 670 mm control cabinet control element mounted on frame construction
            Material Width 400 mm
            Material Thickness 0,40 - 4,00 mm
            No. Levelling Rolls 17
            leveling roll diameter app. 68 (69) mm
            distance between stands 580 mm
            total power requirement 20 kW
            Description :
            LEVELER WITH DRIVE

            adjustment: mechanically
            tilting: mechanically
            support: 1 x mechanically
            number - support rolls: 18 ( 9 x above / 9 x below)
            support roll diameter: 130 mm
            pneumatical ventible length measuring roll mounted on frame construction
            electrical drive power: 20 kW

            accessories:
            toggle lever shear as cut to length shear
            knife length: 670 mm
            control cabinet
            control element mounted on frame construction


        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.