,

Bitte einen Suchbegriff eingeben - Unesite pojam za pretraživanje
Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Folding Machine

          used Sheet metal working / shaeres / bending Folding Machine RAS 73.40


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-788454 · Folding Machine

          RAS - 73.40 - - 2004 -

          Technical details
          sheet width 4000 mm︱plate thickness 2,5 mm︱distance between columns 4060 mm︱Control ︱total power requirement 3 kW︱weight of the machine ca. 5,5 t︱dimensions of the machine ca. m︱
            sheet width 4000 mm
            plate thickness 2,5 mm
            distance between columns 4060 mm
            total power requirement 3 kW
            weight of the machine ca. 5,5 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake TRUMPF TRUMABEND V 85


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-695168 · Hydr. pressbrake

          TRUMPF - TRUMABEND V 85 - - 1996 - TRUMPF Delem DA 65T

          Technical details
          pressure 85 t︱chamfer lenght 2000 mm︱distance between columns 1750 mm︱Control TRUMPF Delem DA 65T ︱total power requirement 10 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. m︱
          T R U M P F (Germany) CNC - Controlled Hydraulic Press Brake Model TRUMABEND V 85, year 1996 Serial No. 88 31 52 __________________________________________________________________________________ Pressure, max. 85 to Working width, max. 2.050 mm Working width between columns 1,750 mm Side daylight of each column 410 mm Max. distance between upper and lower tool holder w/o tools 350 mm Adjustment of upper tool holder approx. 300 mm Table width approx 105 mm Height of Table from floor approx. 1.050 mm Max. stroke 215 mm Stroke, bending speed 1 - 10 mm/sec Stroke, rapid traverse 200/135 mm/sec Adjustment range of back gauge, approx. 800 x 300 (vertical) mm Total electrical load, approx. 10 kW - 400 V - 50 Hz Weight, approx. 7,5 to Accessories / Special Features: * The stroke movement of the upper toolslide is driven by two hydraulic pistons and proportional valves and controlled by two electronic measurement scales. Therefore it can be achieved a tilting line of the upper tool of approx. 10 mm * TRUMPF – CNC Control model DELEM Type DA 65 T with 6 controllable Axis like: Y1, Y2, X, R, Z1 a. Z 2, with direct programming of bending cycles on the pendant control and screen with grafics. * CNC-Controlled Cambering by separate control unit inside the table. * Hydraulic driven fast clamping of upper and lower tools * On backside of machine mounted a gauge stop slide controlled in 2 axis ( =R a.X-Axis) in vertical stroke and forward and backwards, three sheet metal stopfingers. * Two-handed release on mobile control stand, and/or foot switch. * Pressure Manometer for the Hydraulic System and oil filter * In front of machine there are 2 lengthwise adjustable sheet metal supports. * Various Bending tools smaller size, * Swivable Safety covers on side and backside doors with plexi-glass shields, etc. Condition : Good to very good – stable design. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.
            pressure 85 t
            chamfer lenght 2000 mm
            distance between columns 1750 mm
            Control TRUMPF Delem DA 65T
            total power requirement 10 kW
            weight of the machine ca. 7,5 t
            Description :
            T R U M P F (Germany)
            CNC - Controlled Hydraulic Press Brake
            Model TRUMABEND V 85, year 1996 Serial No. 88 31 52
            __________________________________________________________________________________

            Pressure, max. 85 to
            Working width, max. 2.050 mm
            Working width between columns 1,750 mm

            Side daylight of each column 410 mm
            Max. distance
            between upper and lower tool holder w/o tools 350 mm
            Adjustment of upper tool holder approx. 300 mm
            Table width approx 105 mm
            Height of Table from floor approx. 1.050 mm

            Max. stroke 215 mm
            Stroke, bending speed 1 - 10 mm/sec
            Stroke, rapid traverse 200/135 mm/sec
            Adjustment range of back gauge, approx. 800 x 300 (vertical) mm

            Total electrical load, approx. 10 kW - 400 V - 50 Hz
            Weight, approx. 7,5 to

            Accessories / Special Features:
            * The stroke movement of the upper toolslide is driven by two hydraulic
            pistons and proportional valves and controlled by two electronic
            measurement scales.
            Therefore it can be achieved a tilting line of the upper tool of
            approx. 10 mm
            * TRUMPF – CNC Control model DELEM Type DA 65 T with 6 controllable Axis
            like:
            Y1, Y2, X, R, Z1 a. Z 2, with direct programming of bending cycles on
            the pendant control and screen with grafics.
            * CNC-Controlled Cambering by separate control unit inside the table.
            * Hydraulic driven fast clamping of upper and lower tools
            * On backside of machine mounted a gauge stop slide controlled in 2 axis
            ( =R a.X-Axis) in vertical stroke and forward and backwards, three
            sheet metal stopfingers.
            * Two-handed release on mobile control stand, and/or foot switch.
            * Pressure Manometer for the Hydraulic System and oil filter
            * In front of machine there are 2 lengthwise adjustable sheet metal
            supports.
            * Various Bending tools smaller size,
            * Swivable Safety covers on side and backside doors with plexi-glass
            shields, etc.

            Condition : Good to very good – stable design.
            Machine can be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic BRÜCK SCT 1225 SS


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-200544 · Plate Shear - Hydraulic

          BRÜCK - SCT 1225 SS - - 1989 -

          Technical details
          sheet width 2500 mm︱plate thickness 12,5 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Width of metal, max. 2,500 mm Metal thickness, max. 12.5 mm Weight, approx. 19,000 kg Drive 40 kW Equipment / Special Features: Adjustment of cutting gap. Hydraulic blank holder. Automatic arrester adjustment for cutting blanks. Program input and piece number input. Transportation device for blanks. Stacking device. This is an ideal machine for cutting lots of small blanks out of large pieces of sheet metal. Machine is equipped with a complex stacking device on the back of the machine. This is a heavy and rigid machine. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest.
            sheet width 2500 mm
            plate thickness 12,5 mm
            Description :
            Width of metal, max. 2,500 mm
            Metal thickness, max. 12.5 mm

            Weight, approx. 19,000 kg
            Drive 40 kW

            Equipment / Special Features:
            Adjustment of cutting gap.
            Hydraulic blank holder.
            Automatic arrester adjustment for cutting blanks.
            Program input and piece number input.
            Transportation device for blanks.
            Stacking device.


            This is an ideal machine for cutting lots of small blanks out of large pieces
            of sheet metal. Machine is equipped with a complex stacking device on
            the back of the machine. This is a heavy and rigid machine.

            Condition : Good to very good. Machine can soon be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

            Thank you for your interest.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Shear - Mechanical

          used Sheet metal working / shaeres / bending Plate Shear - Mechanical SCHULER STa 5/1000


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-191798 · Plate Shear - Mechanical

          SCHULER - STa 5/1000 - - 1960 -

          Technical details
          sheet width 5 mm︱plate thickness 1000 mm︱distance between columns mm︱total power requirement 4 kW︱weight of the machine ca. 2,8 t︱dimensions of the machine ca. m︱
            sheet width 5 mm
            plate thickness 1000 mm
            total power requirement 4 kW
            weight of the machine ca. 2,8 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Roller leveller

          used Sheet metal working / shaeres / bending Roller leveller DUNKES HR 63/TR 25/HRW 25


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-734635 · Roller leveller

          DUNKES - HR 63/TR 25/HRW 25 - - 1990 -

          Technical details
          material width 3000 mm︱material thickness 0 mm︱no. of straightening rolls 0 ︱total power requirement 22 kW︱weight of the machine ca. 14,5 t︱dimensions of the machine ca. 7,5 x 2,5 x 2,9 m︱
          D U N K E S Hydraulic Straightening System for Flat material and Section Material With Straightening Press ( C-Frame ) Model HR 63/TR 25/ HRW 25 Year 1990 ( H 89-1960 ) ____________________________________________________________ Consisting of: Straightening C-Frame Press, Model HR 63, Pressure 63 to, Stroke of Piston 160 mm, Straightening speed up/down 25/75 mm/s, Daylight 550 mm, Distance to column 620 mm, sensitive Straightening stroke via handlever with turret-stop, Measuring device for accurate straitening via a lightbar Horizontal Straightening Device Model HRW 25, Pressure 25 tons attached on right hand side of vertical Press, straightening stroke 160 mm, straightening speed fwd/bwd 57/10 mm/s, designed as Pressbow which moves in both directions against a straightening tool to avoid the turnovers of workpiece during straightening process, 4 tool posts front and backside/left and right with a distance of 600 mm, Handlever for stroke movement. Torsion straightening device for twisting the section material up to a power of 25.000 Nm, Resistance Moment 69.000 mm³, twisting force max. 320 N/mm², workpiece glamping 320 kN, mounted on left hand side of Press as a integrated unit. The left handed slide can be moved approx.. 3000 mm and is equipped as the clamping station for the workpieces and the right handed unit is for clamping and twisting hydraulically this workpiece up to 35 ° Display to see the torsion on a lightbar.For the crossmovement/loading of workpiece is a roller chain available Straightening Bed for placing and for moving the workpiece towards to the straightening devices, consisting of conveyor roller tables left and right on the press with each approx. 3000 mm length,rollers can be lifted pneumatically for easier transportation. Between the two beds is a working gap for the vertical straightening cylinder with two adjustable counter steadies with exchangeables jaws. Mechanical measuring device to check tension of workpiece built on presstable. The 3 Straightening positions are electrically separated, so only one position can be used on a time. Various pressing tools in different shapes and lengths available. Also a roller support for straighten cylindrical shafts or tubes up to 1.800 mm length to place it on the a.m. straightening bed. Oil tank capacity for hydraulic oil approx. 500 liters Total electrical load approx. 22 kW - 400 V - 50 cycles Weight approx. 14,5 to, Outside dimension: 7,5 x 2,5 x 2,9 m height Condition : good to very good – can be soon inspected under power. Delivery : ex stock – as inspected here in stock Payment : net – after completion of contract
            material width 3000 mm
            total power requirement 22 kW
            weight of the machine ca. 14,5 t
            dimensions of the machine ca. 7,5 x 2,5 x 2,9 m
            Description :
            D U N K E S
            Hydraulic Straightening System for Flat material and Section Material
            With Straightening Press ( C-Frame ) Model HR 63/TR 25/ HRW 25
            Year 1990 ( H 89-1960 )
            ____________________________________________________________

            Consisting of:
            Straightening C-Frame Press, Model HR 63, Pressure 63 to, Stroke of
            Piston 160 mm, Straightening speed up/down 25/75 mm/s, Daylight 550 mm,
            Distance to column 620 mm, sensitive Straightening stroke via handlever with
            turret-stop, Measuring device for accurate straitening via a lightbar
            Horizontal Straightening Device Model HRW 25, Pressure 25 tons attached on
            right hand side of vertical Press, straightening stroke 160 mm, straightening speed fwd/bwd
            57/10 mm/s, designed as Pressbow which moves in both directions against a
            straightening tool to avoid the turnovers of workpiece during straightening
            process, 4 tool posts front and backside/left and right with a distance of
            600 mm, Handlever for stroke movement.
            Torsion straightening device for twisting the section material up to a power
            of 25.000 Nm,
            Resistance Moment 69.000 mm³, twisting force max. 320 N/mm², workpiece
            glamping 320 kN,
            mounted on left hand side of Press as a integrated unit. The left handed
            slide can be moved approx.. 3000 mm and is equipped as the clamping station
            for the workpieces and the right handed unit is for clamping and twisting
            hydraulically this workpiece up to 35 ° Display to see the torsion on a
            lightbar.For the crossmovement/loading of workpiece is a roller chain
            available
            Straightening Bed for placing and for moving the workpiece towards to the
            straightening devices,
            consisting of conveyor roller tables left and right on the press with each
            approx. 3000 mm length,rollers can be lifted pneumatically for easier
            transportation. Between the two beds is a working gap for the vertical
            straightening cylinder with two adjustable counter steadies with
            exchangeables jaws. Mechanical measuring device to check tension of
            workpiece built on presstable.
            The 3 Straightening positions are electrically separated, so only one
            position can be used on a time. Various pressing tools in different shapes
            and lengths available. Also a roller support for straighten cylindrical
            shafts or tubes up to 1.800 mm length to place it on the a.m. straightening
            bed.

            Oil tank capacity for hydraulic oil approx. 500 liters

            Total electrical load approx. 22 kW - 400 V - 50 cycles
            Weight approx. 14,5 to,
            Outside dimension: 7,5 x 2,5 x 2,9 m height

            Condition : good to very good – can be soon inspected under power.
            Delivery : ex stock – as inspected here in stock
            Payment : net – after completion of contract



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Sheet Metal Deburring Machine

          used Sheet metal working / shaeres / bending Sheet Metal Deburring Machine ERNST EM 5 N/II/L + 2 B/1400


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-673954 · Sheet Metal Deburring Machine

          ERNST - EM 5 N/II/L + 2 B/1400 - - 2007 -

          Technical details
          working width 1380 mm︱workpiece height 70 mm︱ ︱total power requirement 45 kW︱weight of the machine ca. 5.500 kg︱dimensions of the machine ca. m︱
            working width 1380 mm
            workpiece height 70 mm
            total power requirement 45 kW
            weight of the machine ca. 5.500 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          waste cutter

          used Sheet metal working / shaeres / bending waste cutter SCHWARZ ASM


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-337588 · waste cutter

          SCHWARZ - ASM - - 1975 -

          Technical details
          material width 300 mm︱material thickness 3 mm︱cross cut ︱weight of the machine ca. 0,12 t︱dimensions of the machine ca. 0,5; 1; 1 m︱
          Coil Shredder
            material width 300 mm
            material thickness 3 mm
            weight of the machine ca. 0,12 t
            dimensions of the machine ca. 0,5; 1; 1 m
            Description :
            Coil Shredder


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.