,

Bitte einen Suchbegriff eingeben - Unesite pojam za pretraživanje
Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:

          Intermach BV - Stockist for used machines

          Machinelist:


          CNC Lathe

          used  CNC Lathe PHOENIX FL8040CNC


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-D745 · CNC Lathe

          PHOENIX - FL8040CNC - - 2001 - cnc

          Technical details
          turning diameter 800 mm︱turning length 4000 mm︱control cnc ︱total power requirement kW︱weight of the machine ca. 7,3 t︱dimensions of the machine ca. 6,6x2,2x2 m︱
          Brand: Phoenix Type: FL 8040 CNC IT Year of make: 2001 Distance between centers: 4.000 mm Centre height: 400 mm Swing over bed: 800 mm ø Swing over support: 510 mm ø Swing in the gap: 1.100 mm ø Spindle boring: 250 mm ø Steady rest: 350 mm ø 3-Jaw chuck: 630 mm ø Machine dimensions (lxwxh): 6.500 x 2.200 x 2.000 mm Machine weight: 7.300 kg
            turning diameter 800 mm
            turning length 4000 mm
            control cnc
            weight of the machine ca. 7,3 t
            dimensions of the machine ca. 6,6x2,2x2 m
            Description :
            Brand: Phoenix
            Type: FL 8040 CNC IT
            Year of make: 2001
            Distance between centers: 4.000 mm
            Centre height: 400 mm
            Swing over bed: 800 mm ø
            Swing over support: 510 mm ø
            Swing in the gap: 1.100 mm ø
            Spindle boring: 250 mm ø
            Steady rest: 350 mm ø
            3-Jaw chuck: 630 mm ø
            Machine dimensions (lxwxh): 6.500 x 2.200 x 2.000 mm
            Machine weight: 7.300 kg
          Datasheet
          Request / Contact

          Facing Lathe

          used  Facing Lathe TADU FS 1250 CNC


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-1010063 · Facing Lathe

          TADU - FS 1250 CNC - - NB - FAGOR 8050 T

          Technical details
          faceplate diameter 1800 mm︱turning diameter over slide rest 2500 mm︱turning length mm︱Control FAGOR 8050 T ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1010063 Type of machine CNC Facelathe Make TADU Type FS 1250 Build in nb Type of control FAGOR, 8050T Turnung diameter over bed 2500 mm Additional information 4-jaws chuck 1800 mm
            faceplate diameter 1800 mm
            turning diameter over slide rest 2500 mm
            Control FAGOR 8050 T
            Description :
            Stocknumber 1010063
            Type of machine CNC Facelathe
            Make TADU
            Type FS 1250
            Build in nb
            Type of control FAGOR, 8050T
            Turnung diameter over bed 2500 mm


            Additional information
            4-jaws chuck 1800 mm

          Datasheet
          Request / Contact

          lathe-conventional-electronic

          used  lathe-conventional-electronic JMTCL CW61125B


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-D273 · lathe-conventional-electronic

          JMTCL - CW61125B - - 2021 -

          Technical details
          turning diameter 1250 mm︱turning length 1500 mm︱swing diameter over bed slide 850 mm︱total power requirement 22 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. 3100x2150x1825 m︱
          Brand: JMTCL Type: CW61125B Distance between centers: 1.500 mm Centerheight: 625 mm Swing over bed: 1.250 mm ø Swing over support: 850 mm ø Maximum turning diameter : 1.250ø x 1.500 mm ø Spindle boring: 135 mm ø
            turning diameter 1250 mm
            turning length 1500 mm
            swing diameter over bed slide 850 mm
            total power requirement 22 kW
            weight of the machine ca. 6 t
            dimensions of the machine ca. 3100x2150x1825 m
            Description :
            Brand: JMTCL
            Type: CW61125B
            Distance between centers: 1.500 mm
            Centerheight: 625 mm
            Swing over bed: 1.250 mm ø
            Swing over support: 850 mm ø
            Maximum turning diameter : 1.250ø x 1.500 mm ø
            Spindle boring: 135 mm ø
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic COLOMBO VUP-2S


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-D805 · lathe-conventional-electronic

          COLOMBO - VUP-2S - - 1978 -

          Technical details
          turning diameter 1120 mm︱turning length 6000 mm︱swing diameter over bed slide 760 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Brand: Colombo Type: VUP 2S Year of make: 1978 Distance between centers: 6.000 mm Centre height: 560 mm Swing over bed: 1.120 mm ø Swing over support: 760 mm ø 4-Jaw chuck: 1.000 mm ø Digital read-out: Sony Including: 1 x steady rest 520 mm ø 1 x steady rest 950 mm ø 1 x open steady rest Chisel holder Chisel support automatic feed Rapid traverse chisel support Electrically movable counter center Drilling bar: length 2046 mm x 170 mm ø
            turning diameter 1120 mm
            turning length 6000 mm
            swing diameter over bed slide 760 mm
            Description :
            Brand: Colombo
            Type: VUP 2S
            Year of make: 1978
            Distance between centers: 6.000 mm
            Centre height: 560 mm
            Swing over bed: 1.120 mm ø
            Swing over support: 760 mm ø
            4-Jaw chuck: 1.000 mm ø
            Digital read-out: Sony
            Including:
            1 x steady rest 520 mm ø
            1 x steady rest 950 mm ø
            1 x open steady rest

            Chisel holder
            Chisel support automatic feed
            Rapid traverse chisel support
            Electrically movable counter center

            Drilling bar:
            length 2046 mm x 170 mm ø
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic EST-TICINO 520/2000


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-D858 · lathe-conventional-electronic

          EST-TICINO - 520/2000 - - -

          Technical details
          turning diameter 1040/1900 mm︱turning length 2000/3000/1250 mm︱swing diameter over bed slide 740 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Make: EST-Ticino type: 520/2000 distance between centers min/max: 2000/3000 mm center height 520 mm Max. turning diameter over bed 1040 mm Max. turning diameter over support 710 mm max. turning diameter/length 1900 x 1250 mm spindle passage 135 mm with 3 jaw chuck with 4-jaw chuck quick change holder in very good and immediately ready condition
            turning diameter 1040/1900 mm
            turning length 2000/3000/1250 mm
            swing diameter over bed slide 740 mm
            Description :
            Make: EST-Ticino
            type: 520/2000
            distance between centers min/max: 2000/3000 mm
            center height 520 mm
            Max. turning diameter over bed 1040 mm
            Max. turning diameter over support 710 mm
            max. turning diameter/length 1900 x 1250 mm
            spindle passage 135 mm
            with 3 jaw chuck
            with 4-jaw chuck
            quick change holder

            in very good and immediately ready condition
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic GEMINIS GE870


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-d748 · lathe-conventional-electronic

          GEMINIS - GE870 - - -

          Technical details
          turning diameter 880 mm︱turning length 6000 mm︱swing diameter over bed slide 540 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Brand: Geminis Type: GE870 Distance between centers: 6.000 mm Centre height: 440 mm Swing over bed: 880 mm ø Swing over support: 540 mm ø Swing in the gap: 1.100 mm ø Spindle boring: 85 mm ø Steadys: 400 mm ø + 600 mm ø 3 jaw chuck Digital read-out
            turning diameter 880 mm
            turning length 6000 mm
            swing diameter over bed slide 540 mm
            Description :
            Brand: Geminis
            Type: GE870
            Distance between centers: 6.000 mm
            Centre height: 440 mm
            Swing over bed: 880 mm ø
            Swing over support: 540 mm ø
            Swing in the gap: 1.100 mm ø
            Spindle boring: 85 mm ø
            Steadys: 400 mm ø + 600 mm ø
            3 jaw chuck
            Digital read-out
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic TACCHI MT400


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-d833 · lathe-conventional-electronic

          TACCHI - MT400 - - -

          Technical details
          turning diameter 800 mm︱turning length 1500 mm︱swing diameter over bed slide 250 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Next image can not be found: d833 tacchi mt400 (2) Brand: Tacchi Type: MT400 Distance between centers: 1.500 mm Centre height: 400 mm Swing over bed: 800 mm ø Swing over support: 250 mm ø Swing in the gap: 550 mm ø Spindle boring: 130 mm ø 3-Jaw chuck: 390 mm ø Digital read-out Rapid traverse on longitudinal and cross travelling
            turning diameter 800 mm
            turning length 1500 mm
            swing diameter over bed slide 250 mm
            Description :
            Next image can not be found: d833 tacchi mt400 (2)
            Brand: Tacchi
            Type: MT400
            Distance between centers: 1.500 mm
            Centre height: 400 mm
            Swing over bed: 800 mm ø
            Swing over support: 250 mm ø
            Swing in the gap: 550 mm ø
            Spindle boring: 130 mm ø
            3-Jaw chuck: 390 mm ø
            Digital read-out
            Rapid traverse on longitudinal and cross travelling
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column HANKOOK VLC 30/70


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-1020041 · Vertical Turret Lathe - Single Column

          HANKOOK - VLC 30/70 - - 2004 - FANUC 18i-TB

          Technical details
          faceplate diameter 3.000 mm︱swing diameter 7.000 mm︱turning height 3.000 mm︱Control FANUC 18i-TB ︱total power requirement 60/75 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Hankook Type: VLC 30/70 CNC brand: Fanuc CNC model: 18i-TB Year of make: 2004 CNC controlled Jawplate diameter: 3.000 mm ø Maximum turning diameter : 7.000 mm ø Turning height: 3.000 mm X: 2.225 mm Z: 1.600 mm W: 2.000 mm Incl. Spindle for live tools C axis attachment Tool changer: 24 Maximum table load: 30.000 kg Machine weight: 88.500 kg Including tools as in the photos and turntable extensions for turning diameter of 7000 mm ø This machine was overhauled in 2016 In top condition Max. speed C axis: 0 - 0.5 rpm Motor C axis: 9 kW Feeds X / Z: 0.01 - 500 mm / min RPM table: 1-80 rpm
            faceplate diameter 3.000 mm
            swing diameter 7.000 mm
            turning height 3.000 mm
            Control FANUC 18i-TB
            total power requirement 60/75 kW
            Description :
            Hankook
            Type: VLC 30/70
            CNC brand: Fanuc
            CNC model: 18i-TB
            Year of make: 2004
            CNC controlled
            Jawplate diameter: 3.000 mm ø
            Maximum turning diameter : 7.000 mm ø
            Turning height: 3.000 mm
            X: 2.225 mm
            Z: 1.600 mm
            W: 2.000 mm
            Incl. Spindle for live tools
            C axis attachment
            Tool changer: 24
            Maximum table load: 30.000 kg
            Machine weight: 88.500 kg
            Including tools as in the photos and turntable extensions for turning diameter of 7000 mm ø

            This machine was overhauled in 2016
            In top condition

            Max. speed C axis: 0 - 0.5 rpm
            Motor C axis: 9 kW
            Feeds X / Z: 0.01 - 500 mm / min
            RPM table: 1-80 rpm
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column PIETRO CARNAGHI AC10 CNC


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-1020042 · Vertical Turret Lathe - Single Column

          PIETRO CARNAGHI - AC10 CNC - - 1987 - SIEMENS 850M

          Technical details
          faceplate diameter 1000 mm︱swing diameter 1400 mm︱turning height 1400 mm︱control SIEMENS 850M ︱total power requirement 125 kW︱weight of the machine ca. 38 t︱dimensions of the machine ca. m︱
          Stocknumber 1020042 Type of machine CNC VTL Make PIETRO CARNAGHI Type AC 10 CNC Build in 1987 Type of control Siemens 850 M/E Faceplate diameter 1000 mm Max. Swing diameter 1400 mm Turning height max. 1400 mm Total Power (KW) totaal 125 Lenght (mm) 11000 Width (mm) 8000 Height (mm) 6000 Weight 38000 kg Additional information with driven tools with pallet changer
            faceplate diameter 1000 mm
            swing diameter 1400 mm
            turning height 1400 mm
            control SIEMENS 850M
            total power requirement 125 kW
            weight of the machine ca. 38 t
            Description :
            Stocknumber 1020042
            Type of machine CNC VTL
            Make PIETRO CARNAGHI
            Type AC 10 CNC
            Build in 1987
            Type of control Siemens 850 M/E
            Faceplate diameter 1000 mm
            Max. Swing diameter 1400 mm
            Turning height max. 1400 mm
            Total Power (KW) totaal 125
            Lenght (mm) 11000
            Width (mm) 8000
            Height (mm) 6000
            Weight 38000 kg


            Additional information
            with driven tools
            with pallet changer

          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column STANKO 1512


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-D489 · Vertical Turret Lathe - Single Column

          STANKO - 1512 - - 1977 -

          Technical details
          faceplate diameter 1130 mm︱swing diameter 1500 mm︱turning height 1100 mm︱faceplate diameter mm︱swing diameter mm︱total power requirement 30 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Brand: STANKO TYPEL 1512 Build in: 1977 with pneumatick 3-jaw stuck 1130 mm max. turning diameter 1500 mm max. turning height 1100 mm Motor 30 KW
            faceplate diameter 1130 mm
            swing diameter 1500 mm
            turning height 1100 mm
            total power requirement 30 kW
            Description :
            Brand: STANKO
            TYPEL 1512
            Build in: 1977
            with pneumatick 3-jaw stuck 1130 mm
            max. turning diameter 1500 mm
            max. turning height 1100 mm
            Motor 30 KW
          Datasheet
          Request / Contact

          Floor Type Boring and Milling M/C - Hor.

          used  Floor Type Boring and Milling M/C - Hor. PEGARD af 11


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-1210014 · Floor Type Boring and Milling M/C - Hor.

          PEGARD - af 11 - - nb -

          Technical details
          spindle diameter 110 mm︱x-travel 4000 mm︱y-travel 2000 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1210014 Type of machine Floortype Boring Machine Make PEGARD Type AF11 Type of control Conventional Spindle diameter 110 mm X-stroke (mm) 4000 Y-stroke (mm) 2000 Z-stroke (mm) 300/750 Table dimensions (mm) 1200 x 1600 mm Table rotation (degrees) 360 Tool Taper Iso 50 Speeds (Rpm) 4 - 1000
            spindle diameter 110 mm
            x-travel 4000 mm
            y-travel 2000 mm
            Description :

            Stocknumber 1210014
            Type of machine Floortype Boring Machine
            Make PEGARD
            Type AF11
            Type of control Conventional
            Spindle diameter 110 mm
            X-stroke (mm) 4000
            Y-stroke (mm) 2000
            Z-stroke (mm) 300/750
            Table dimensions (mm) 1200 x 1600 mm
            Table rotation (degrees) 360
            Tool Taper Iso 50
            Speeds (Rpm) 4 - 1000



          Datasheet
          Request / Contact
          used  Floor Type Boring and Milling M/C - Hor. WOTAN Rapid 5C


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-1210057 · Floor Type Boring and Milling M/C - Hor.

          WOTAN - Rapid 5C - - 2004 -

          Technical details
          spindle diameter 160 mm︱x-travel 10.000 mm︱y-travel 3.000 mm︱Control ︱total power requirement 120/63 spindel kW︱weight of the machine ca. 63 t︱dimensions of the machine ca. 15x3.85x7.36 m︱
          Stocknumber 1210057 Type of machine CNC Floortype boring machine Make WOTAN Type Rapid 5C Build in 2004 Type of control HEIDENHAIN iTNC 530 Spindle diameter 160 mm X-stroke (mm) 10.000 Y-stroke (mm) 3.800 Z-stroke (mm) 700 W-stroke 700 mm Tool Taper Iso 50 Speeds (Rpm) 1,25 - 1250 Feeds (mm/R) 1 - 5000 mm/min Rapid feeds 5 mtr/min. Total Power (KW) 120 /spindel 83 Lenght (mm) 14.500 Width (mm) 3.850 Height (mm) 7.360 Weight 62.300 kg Additional information completely overhould in 2004 and retrofitted by Dorries Scharmann with CNC control HEIDENHAIN iTNC 530 - 4 different angular milling heads - hydrostatic spindle bearing - aerostatic guideways - coolant device - chip conveyor - oil cooler Film YouTube: https://www.youtube.com/watch?v=ks6D5rutslg
            spindle diameter 160 mm
            x-travel 10.000 mm
            y-travel 3.000 mm
            total power requirement 120/63 spindel kW
            weight of the machine ca. 63 t
            dimensions of the machine ca. 15x3.85x7.36 m
            Description :
            Stocknumber 1210057
            Type of machine CNC Floortype boring machine
            Make WOTAN
            Type Rapid 5C
            Build in 2004
            Type of control HEIDENHAIN iTNC 530
            Spindle diameter 160 mm
            X-stroke (mm) 10.000
            Y-stroke (mm) 3.800
            Z-stroke (mm) 700
            W-stroke 700 mm
            Tool Taper Iso 50
            Speeds (Rpm) 1,25 - 1250
            Feeds (mm/R) 1 - 5000 mm/min
            Rapid feeds 5 mtr/min.
            Total Power (KW) 120 /spindel 83
            Lenght (mm) 14.500
            Width (mm) 3.850
            Height (mm) 7.360
            Weight 62.300 kg


            Additional information
            completely overhould in 2004 and retrofitted by Dorries Scharmann with CNC
            control HEIDENHAIN iTNC 530
            - 4 different angular milling heads
            - hydrostatic spindle bearing
            - aerostatic guideways
            - coolant device
            - chip conveyor
            - oil cooler

            Film YouTube: https://www.youtube.com/watch?v=ks6D5rutslg


          Datasheet
          Request / Contact

          Machining Center - Vertical

          used  Machining Center - Vertical UNISIGN UV4000


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-F523 · Machining Center - Vertical

          UNISIGN - UV4000 - - 2007 -

          Technical details
          x-travel 1600 mm︱y-travel 600 mm︱z-travel 500 mm︱total power requirement kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. m︱
          Brand: Unisign Type: UV 4000 CNC brand: Siemens CNC model: Sinumerik 840 D Year of make: 2007 Vertically Table length: 2.500 mm Table width: 600 mm Number of pallets: 1 X: 1.600 mm Y: 600 mm Z: 500 mm Preparation for 4th axis Clamping possibility 4th axis: 1.660 x 200 mm Spindle taper: BT40 Tool changer: 51 Maximum speed: 12.000 RPM Max. workpiece height: 690 mm Chip conveyor Machine weight: 6.500 kg
            x-travel 1600 mm
            y-travel 600 mm
            z-travel 500 mm
            weight of the machine ca. 6,5 t
            Description :
            Brand: Unisign
            Type: UV 4000
            CNC brand: Siemens
            CNC model: Sinumerik 840 D
            Year of make: 2007
            Vertically
            Table length: 2.500 mm
            Table width: 600 mm
            Number of pallets: 1
            X: 1.600 mm
            Y: 600 mm
            Z: 500 mm
            Preparation for 4th axis
            Clamping possibility 4th axis: 1.660 x 200 mm
            Spindle taper: BT40
            Tool changer: 51
            Maximum speed: 12.000 RPM
            Max. workpiece height: 690 mm
            Chip conveyor
            Machine weight: 6.500 kg
          Datasheet
          Request / Contact

          Milling Machining Centers 5 Axis

          used  Milling Machining Centers 5 Axis UNISIGN Uniport4


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-F588 · Milling Machining Centers 5 Axis

          UNISIGN - Uniport4 - - 2005 -

          Technical details
          x-travel 1500 mm︱y-travel 500 mm︱z-travel 400 mm︱total power requirement kW︱weight of the machine ca. 19 t︱dimensions of the machine ca. 6x3,45x3,15 m︱
          Brand: Unisign Type: Uniport 4 CNC brand: Siemens CNC model: Sinumerik Year of make: 2005 Table length: 2.200 mm Table width: 1.500 mm Number of pallets: 2 X: 1.500 mm Y: 500 mm Z: 400 mm Machine dimensions: 6.000 x 3.450 x 3.150 mm Machine weight: 19.000 kg 5 Axis
            x-travel 1500 mm
            y-travel 500 mm
            z-travel 400 mm
            weight of the machine ca. 19 t
            dimensions of the machine ca. 6x3,45x3,15 m
            Description :
            Brand: Unisign
            Type: Uniport 4
            CNC brand: Siemens
            CNC model: Sinumerik
            Year of make: 2005
            Table length: 2.200 mm
            Table width: 1.500 mm
            Number of pallets: 2
            X: 1.500 mm
            Y: 500 mm
            Z: 400 mm
            Machine dimensions: 6.000 x 3.450 x 3.150 mm
            Machine weight: 19.000 kg
            5 Axis
          Datasheet
          Request / Contact

          Radial Drilling Machine

          used  Radial Drilling Machine TOS VO 50


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-1610008 · Radial Drilling Machine

          TOS - VO 50 - - NB -

          Technical details
          bore capacity in steel (diameter) 50 mm︱arm length 1500 mm︱workpiece height max. mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1610008 Type of machine Radial drill Make MAS Type VO 50 Admision in drilling spindle MT 5 Max. drill capacity 50 mm Base dimensions 1820 x 986 mm Speeds (Rpm) 28 - 2500 Feeds (mm/R) 0,5 - 2 Lenght (mm) 3250 Width (mm) 1120 Height (mm) 3396 Weight 4550
            bore capacity in steel (diameter. 50 mm
            arm length 1500 mm
            Description :
            Stocknumber 1610008
            Type of machine Radial drill
            Make MAS
            Type VO 50
            Admision in drilling spindle MT 5
            Max. drill capacity 50 mm
            Base dimensions 1820 x 986 mm
            Speeds (Rpm) 28 - 2500
            Feeds (mm/R) 0,5 - 2
            Lenght (mm) 3250
            Width (mm) 1120
            Height (mm) 3396
            Weight 4550


          Datasheet
          Request / Contact
          used  Radial Drilling Machine KAO MING Lux-drill-1250 H


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-br295 · Radial Drilling Machine

          KAO MING - Lux-drill-1250 H - - 1982 -

          Technical details
          bore capacity in steel (diameter) 50 mm︱arm length 1250 mm︱workpiece height max. mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Brand: Kao Ming Type: Lux Drill-1250 DH Year of make: 1982 Capacity: 50 mm Throat depth: 1.250 mm Spindle taper: MK5 Without drill block (is available separately)
            bore capacity in steel (diameter. 50 mm
            arm length 1250 mm
            Description :
            Brand: Kao Ming
            Type: Lux Drill-1250 DH
            Year of make: 1982
            Capacity: 50 mm
            Throat depth: 1.250 mm
            Spindle taper: MK5
            Without drill block (is available separately)
          Datasheet
          Request / Contact

          Ram-Type Floor Boring and Milling M/C

          used  Ram-Type Floor Boring and Milling M/C SKODA W 160 HC


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-1210060 · Ram-Type Floor Boring and Milling M/C

          SKODA - W 160 HC - - 1990 -

          Technical details
          spindle diameter 160 mm︱x-travel 15000 mm︱y-travel 4000 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1210060 Type of machine Floortype Boring machine Make SKODA Type W160HC Build in 1990 Spindle diameter 160 mm X-stroke (mm) 15.000 Y-stroke (mm) 4.000 Z-stroke (mm) 1.600 W-stroke 1.250 Tool Taper Iso 50 Additional information With 3 floorplates 1880x5615 mm en 3x 1880x6400 mm 3 millingheads and 1 support 1 rotarytable Skoda S-35 C, 35 ton 2800 x 3150 mm
            spindle diameter 160 mm
            x-travel 15000 mm
            y-travel 4000 mm
            Description :
            Stocknumber 1210060
            Type of machine Floortype Boring machine
            Make SKODA
            Type W160HC
            Build in 1990
            Spindle diameter 160 mm
            X-stroke (mm) 15.000
            Y-stroke (mm) 4.000
            Z-stroke (mm) 1.600
            W-stroke 1.250
            Tool Taper Iso 50


            Additional information
            With 3 floorplates 1880x5615 mm en 3x 1880x6400 mm
            3 millingheads and 1 support
            1 rotarytable Skoda S-35 C, 35 ton 2800 x 3150 mm

          Datasheet
          Request / Contact
          used  Ram-Type Floor Boring and Milling M/C SKODA W 160 CNC


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-1210050 · Ram-Type Floor Boring and Milling M/C

          SKODA - W 160 CNC - - 1974/2002 - ICEM 402

          Technical details
          spindle diameter 160 mm︱x-travel 10.000 mm︱y-travel 3.000 mm︱Control ICEM 402 ︱total power requirement kW︱weight of the machine ca. 80 t︱dimensions of the machine ca. m︱
          Stocknumber 1210050 Type of machine CNC Floortype Boring Machine Make SKODA Type W 160 CNC Build in 1974/retrofitted in 2002 Type of control ICEM 402 Spindle diameter 160 mm X-stroke (mm) 10.000 Y-stroke (mm) 3.000 Z-stroke (mm) 1600 W-stroke 1250 mm Speeds (Rpm) 1 - 1.200 Feeds (mm/R) 0,5 - 8.000 mm/min. Rapid feeds 8.000 mm/min Total Power (KW) 180 KvA Weight 80 ton
            spindle diameter 160 mm
            x-travel 10.000 mm
            y-travel 3.000 mm
            Control ICEM 402
            weight of the machine ca. 80 t
            Description :
            Stocknumber 1210050
            Type of machine CNC Floortype Boring Machine
            Make SKODA
            Type W 160 CNC
            Build in 1974/retrofitted in 2002
            Type of control ICEM 402
            Spindle diameter 160 mm
            X-stroke (mm) 10.000
            Y-stroke (mm) 3.000
            Z-stroke (mm) 1600
            W-stroke 1250 mm
            Speeds (Rpm) 1 - 1.200
            Feeds (mm/R) 0,5 - 8.000 mm/min.
            Rapid feeds 8.000 mm/min
            Total Power (KW) 180 KvA
            Weight 80 ton

          Datasheet
          Request / Contact

          Rapid Radial Drilling Machine

          used  Rapid Radial Drilling Machine BATLIBOI BPR-50


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-br311 · Rapid Radial Drilling Machine

          BATLIBOI - BPR-50 - - -

          Technical details
          bore capacity in steel (diameter) 50 mm︱arm length 2000 mm︱workpiece height max. mm︱total power requirement kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 5,8x4,5x3,4 m︱
          Brand: Batliboi Type: BPR-50 Boiler radial drilling machine Capacity: 50 mm Throat depth: 2.000 mm Spindle taper: MK5 Stroke: 350 mm Drilling Spindle: 75 mm ø Head in degrees adjustable Speed min: 16 RPM Speed max: 800 RPM Clamping surface: 2.610 x 1.050 x 260 mm Machine dimensions (lxwxh): 5.740 x 4.450 x 3.397 mm Machine weight: 6.570 kg
            bore capacity in steel (diameter. 50 mm
            arm length 2000 mm
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 5,8x4,5x3,4 m
            Description :
            Brand: Batliboi
            Type: BPR-50
            Boiler radial drilling machine
            Capacity: 50 mm
            Throat depth: 2.000 mm
            Spindle taper: MK5
            Stroke: 350 mm
            Drilling Spindle: 75 mm ø
            Head in degrees adjustable
            Speed min: 16 RPM
            Speed max: 800 RPM
            Clamping surface: 2.610 x 1.050 x 260 mm
            Machine dimensions (lxwxh): 5.740 x 4.450 x 3.397 mm
            Machine weight: 6.570 kg
          Datasheet
          Request / Contact

          Table Type Boring and Milling Machine

          used  Table Type Boring and Milling Machine FEMCO1200 WBT-100SR2


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-kot180 · Table Type Boring and Milling Machine

          FEMCO1200 - WBT-100SR2 - - 1995 -

          Technical details
          spindle diameter 100 mm︱x-travel 1200 mm︱y-travel 800 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 5,6x3,4x3,x7 m︱
          Brand: Femco Type: WBT-100SR2 CNC brand: Mitsubishi CNC model: Meldas C3 Year of make: 1995-05 Facing support Table length: 1.440 mm Table width: 1.600 mm Spindle diameter: 100 mm ø Machine dimensions (lxwxh): 5.680 x 3.400 x 3.700 mm incl. right-angle milling head type Huron
            spindle diameter 100 mm
            x-travel 1200 mm
            y-travel 800 mm
            dimensions of the machine ca. 5,6x3,4x3,x7 m
            Description :
            Brand: Femco
            Type: WBT-100SR2
            CNC brand: Mitsubishi
            CNC model: Meldas C3
            Year of make: 1995-05
            Facing support
            Table length: 1.440 mm
            Table width: 1.600 mm
            Spindle diameter: 100 mm ø
            Machine dimensions (lxwxh): 5.680 x 3.400 x 3.700 mm
            incl. right-angle milling head type Huron
          Datasheet
          Request / Contact
          used  Table Type Boring and Milling Machine JUARISTI MDR105 cnc


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-kot162 · Table Type Boring and Milling Machine

          JUARISTI - MDR105 cnc - - 1983 -

          Technical details
          spindle diameter 105 mm︱x-travel 1000 mm︱y-travel 1000 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Brand: Juaristi Type: MDR105 CNC CNC brand: Heidenhain CNC model: TNC145 Year of make: 1983 Table length: 1.000 mm Table width: 1.000 mm X: 1.000 mm Y: 1.000 mm Z/W: 1.000 mm Spindle taper: ISO 50 Spindle diameter: 105 mm ø
            spindle diameter 105 mm
            x-travel 1000 mm
            y-travel 1000 mm
            Description :
            Brand: Juaristi
            Type: MDR105 CNC
            CNC brand: Heidenhain
            CNC model: TNC145
            Year of make: 1983
            Table length: 1.000 mm
            Table width: 1.000 mm
            X: 1.000 mm
            Y: 1.000 mm
            Z/W: 1.000 mm
            Spindle taper: ISO 50
            Spindle diameter: 105 mm ø
          Datasheet
          Request / Contact

          Bed Type Milling Machine - Universal

          used  Bed Type Milling Machine - Universal ANAYAK HVM-5000


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-F607 · Bed Type Milling Machine - Universal

          ANAYAK - HVM-5000 - - 1997 -

          Technical details
          x-travel 4300 mm︱y-travel 1000 mm︱z-travel 1050 mm︱total power requirement kW︱weight of the machine ca. 35 t︱dimensions of the machine ca. m︱
          Brand: ANAYAK Type: HVM-5000 Build in : 1997 CNC Control HEIDEHAIN, TNC 426 Tablesize: 5000 x 1000 mm X= 4.300 mm Y= 1.200 mm Z= 1.050 mm Toolchanger for 40 tools Tools: BT 50 CNC Controlled head 2,5 degrees Cooling trough the spindle Number of controlles axes: 4 machineweight 35.000 kg Moveable column
            x-travel 4300 mm
            y-travel 1000 mm
            z-travel 1050 mm
            weight of the machine ca. 35 t
            Description :
            Brand: ANAYAK
            Type: HVM-5000
            Build in : 1997
            CNC Control HEIDEHAIN, TNC 426
            Tablesize: 5000 x 1000 mm
            X= 4.300 mm
            Y= 1.200 mm
            Z= 1.050 mm
            Toolchanger for 40 tools
            Tools: BT 50
            CNC Controlled head 2,5 degrees
            Cooling trough the spindle
            Number of controlles axes: 4
            machineweight 35.000 kg
            Moveable column
          Datasheet
          Request / Contact
          used  Bed Type Milling Machine - Universal ANAYAK HVM 7000


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-F592 · Bed Type Milling Machine - Universal

          ANAYAK - HVM 7000 - - 1997 -

          Technical details
          x-travel 6300 mm︱y-travel 1200 mm︱z-travel 2000 mm︱Control ︱total power requirement kW︱weight of the machine ca. 57 t︱dimensions of the machine ca. 7000x1300x5000 mm︱
          Brand: Anayak Type: HVM7000 CNC brand: Heidenhain Year of make: 1997 Table length: 7.040 mm Table width: 1.000 mm X: 6.300 mm Y: 1.200 mm Z: 2.000 mm max. 3000 Rpm Machine dimensions (lxwxh): 7000 x 1300 x 5000 mm Machine weight: 57.000 kg including 6 angleplates 2500 x 700 mm this machine is in perfekt working order and can be inspected under power
            x-travel 6300 mm
            y-travel 1200 mm
            z-travel 2000 mm
            weight of the machine ca. 57 t
            dimensions of the machine ca. 7000x1300x5000 mm
            Description :
            Brand: Anayak
            Type: HVM7000
            CNC brand: Heidenhain
            Year of make: 1997
            Table length: 7.040 mm
            Table width: 1.000 mm
            X: 6.300 mm
            Y: 1.200 mm
            Z: 2.000 mm
            max. 3000 Rpm
            Machine dimensions (lxwxh): 7000 x 1300 x 5000 mm
            Machine weight: 57.000 kg
            including 6 angleplates 2500 x 700 mm

            this machine is in perfekt working order and can be inspected under power
          Datasheet
          Request / Contact
          used  Bed Type Milling Machine - Universal SORALUCE Soramill 4 TF4


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-F536 · Bed Type Milling Machine - Universal

          SORALUCE - Soramill 4 TF4 - - 1995 -

          Technical details
          x-travel 4000 mm︱y-travel 1000 mm︱z-travel 1000 mm︱total power requirement 22 kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. 10.000 x 6.000 x 4.250 m︱
          Brand: Soraluce Type: Soramill 4 TF4 CNC brand: Heidenhain CNC model: TNC 415 B Year of make: 1995 Table length: 4.000 mm Table width: 1.000 mm X: 4.000 mm Y: 1.000 mm Z: 1.500 mm Spindle taper: ISO50 Speed: 3.000 RPM Huron milling head Motor: 22 kW Machine dimensions (lxwxh): 10.000 x 6.000 x 4.250 mm Machine weight: 25.000 kg
            x-travel 4000 mm
            y-travel 1000 mm
            z-travel 1000 mm
            total power requirement 22 kW
            weight of the machine ca. 25 t
            dimensions of the machine ca. 10.000 x 6.000 x 4.250 m
            Description :
            Brand: Soraluce
            Type: Soramill 4 TF4
            CNC brand: Heidenhain
            CNC model: TNC 415 B
            Year of make: 1995
            Table length: 4.000 mm
            Table width: 1.000 mm
            X: 4.000 mm
            Y: 1.000 mm
            Z: 1.500 mm
            Spindle taper: ISO50
            Speed: 3.000 RPM
            Huron milling head
            Motor: 22 kW
            Machine dimensions (lxwxh): 10.000 x 6.000 x 4.250 mm
            Machine weight: 25.000 kg
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

          Intermach BV   8316BC - Marknesse lange voor 71 Niederlande
          Intermach BV

          lange voor 71



          Contact Trader


            Intermach BV
           lange voor 71
            8316BC - Marknesse
            Niederlande
            +31 (0)653235637
           
            info@intermach.nl
            www.intermach.nl
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Bandsäge - Automatisch · Bearbeitungszentrum · Bearbeitungszentrum 5 Achs · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Bohrmaschine - Universal · Bohrwerkstisch · CNC Drehmaschine · Drehmaschine-konventionell-elektronisch · Fahrständerfräsmaschine · Fräsmaschine - Universal · Fräsmaschine - Vertikal · Karusselldrehmaschine - Einständer · Kopfdrehmaschine · Plattenbohrwerk - Horizontal · Plattenbohrwerk - Traghülse · Portalfräsmaschine · Radialbohrmaschine · Rundschleifmaschine · Rundschleifmaschine - Außen · Schnellradialbohrmaschine · Schweißdrehtisch · Tafelschere - hydraulisch · Tischbohrwerk · Werkstattpresse - hydraulisch ·