,

Bitte einen Suchbegriff eingeben - Unesite pojam za pretraživanje
Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:

          MS Maschinenhandel GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe TOS SV 18R


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-122 · Center Lathe

          TOS - SV 18R - - 1959 -

          Technical details
          turning diameter over bed 380 mm︱turning diameter over slide rest 215 mm︱turning length 1000 mm︱total power requirement kW︱weight of the machine ca. 1800 kg︱dimensions of the machine ca. 2,7 x 1,2 x 1 m︱
            turning diameter over bed 380 mm
            turning diameter over slide rest 215 mm
            turning length 1000 mm
            weight of the machine ca. 1800 kg
            dimensions of the machine ca. 2,7 x 1,2 x 1 m
          Datasheet
          Request / Contact
          used  Center Lathe CONTUR SJ-520


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28231 · Center Lathe

          CONTUR - SJ-520 - - -

          Technical details
          WORKING RANGE TURNING / ︱- swing diameter (max) 520 mm︱- turning diameter (max) 260 mm︱- worpiece length max. 1500 mm︱MAIN SPINDLE ︱- spindle bore diameter 78 mm︱- spindle revolutions (min) 20 /min︱- spindle revolutions (max) 2000 /min︱- number of gears 12 ︱- spindle diameter 78 mm︱SCREW CUTTING SPINDLE ︱- advance z-axis (min.) 0.05 mm/r︱- advance z-axis (max.) 0.82 mm/r︱- advance x-axis (min.) 0.02 mm/r︱- advance x-axis (max.) 0.4 mm/r︱- pitch of spindle 6 mm︱TAILSTOCK ︱- sleeve diameter 68 mm︱- taper: MK 4 ︱ELECTRICAL SPECIFICATIONS
            WORKING RANGE TURNING /
            - swing diameter (max) 520 mm
            - turning diameter (max) 260 mm
            - worpiece length max. 1500 mm
            - spindle bore diameter 78 mm
            - spindle revolutions (min) 20 /min
            - spindle revolutions (max) 2000 /min
            - number of gears 12
            - spindle diameter 78 mm
            - advance z-axis (min.) 0.05 mm/r
            - advance z-axis (max.) 0.82 mm/r
            - advance x-axis (min.) 0.02 mm/r
            - advance x-axis (max.) 0.4 mm/r
            - pitch of spindle 6 mm
            - sleeve diameter 68 mm
          Datasheet
          Request / Contact
          used  Center Lathe CONTUR SJ-760


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28885 · Center Lathe

          CONTUR - SJ-760 - - -

          Technical details
          turning diameter over bed 760 mm︱turning diameter over slide rest 540 mm︱turning length / mm︱ / 760 mm︱ 540 mm︱ 115 mm︱ 10 /min︱ 1000 /min︱ 12 11 kW︱ 0.05 mm/r︱ 0.82 mm/r︱ 0.02 mm/r︱ 0.4 mm/r︱ 32 85 mm︱
            turning diameter over bed 760 mm
            turning diameter over slide rest 540 mm
            turning length / mm
            /
            760 mm
            540 mm
            115 mm
            10 /min
            1000 /min
            12
            11 kW
            0.05 mm/r
            0.82 mm/r
            0.02 mm/r
            0.4 mm/r
            32
            85 mm
          Datasheet
          Request / Contact
          used  Center Lathe CONTUR SJ-660


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28884 · Center Lathe

          CONTUR - SJ-660 - - -

          Technical details
          turning diameter over bed 660 mm︱turning diameter over slide rest 438 mm︱turning length / mm︱ 660 mm︱ 438 mm︱ 85 mm︱ 15 /min︱ 1500 /min︱ 12 11 kW︱ 0.05 mm/r︱ 0.82 mm/r︱ 0.02 mm/r︱ 0.4 mm/r︱ 32 85 mm︱
            turning diameter over bed 660 mm
            turning diameter over slide rest 438 mm
            turning length / mm
            660 mm
            438 mm
            85 mm
            15 /min
            1500 /min
            12
            11 kW
            0.05 mm/r
            0.82 mm/r
            0.02 mm/r
            0.4 mm/r
            32
            85 mm
          Datasheet
          Request / Contact
          used  Center Lathe CONTUR SJ-430


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28229 · Center Lathe

          CONTUR - SJ-430 - - -

          Technical details
          turning diameter over bed 430 mm︱turning diameter over slide rest 215 mm︱turning length 760 mm︱ 430 mm︱ 215 mm︱ 58 mm︱ 20 /min︱ 2000 /min︱ 12 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter over bed 430 mm
            turning diameter over slide rest 215 mm
            turning length 760 mm
            430 mm
            215 mm
            58 mm
            20 /min
            2000 /min
            12
          Datasheet
          Request / Contact
          used  Center Lathe CONTUR SJ-470


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28230 · Center Lathe

          CONTUR - SJ-470 - - -

          Technical details
          WORKING RANGE TURNING ︱- swing diameter (max) 470 mm︱- turning diameter (max) 235 mm︱- worpiece length max. 1000 mm︱BED GAP / BRIDGE ︱- swing in gap 690 mm︱MAIN SPINDLE ︱- spindle bore diameter 58 mm︱- spindle revolutions (min) 20 /min︱- spindle revolutions (max) 2000 /min︱- number of gears 12 ︱- spindle diameter 58 mm︱SCREW CUTTING SPINDLE ︱- advance z-axis (min.) 0.05 mm/r︱- advance z-axis (max.) 0.82 mm/r︱- advance x-axis (min.) 0.02 mm/r︱- advance x-axis (max.) 0.4 mm/r︱TAILSTOCK ︱- taper: MK 4 ︱ELECTRICAL SPECIFICATIONS
          << Machine is in stock at 6500 Landeck / TIROL and can be viewed under power.>> The machine is available with peak widths from 760mm to 2000mm. This offer is a storage machine at a promotional price (Original price incl. These options: 28962.- ) We will send you a non-binding offer with your desired specifications. -> Description as well as standard and special equipment can be found in the PDF file. This storage machine is equipped as follows: Including the following standard accessories, u. a .: - 3-way precision spindle with SKF (FAG) bearings - Spindle brake mechanically - Complete electrical equipment - Coolant device with rear splash guard and splash guard on the slide - Food protection - Shift rod with 3 adjustable cams - Solid grain tip - Covered tension spindle - Set of machine mounting plates - Machine lamp 24 V - Operating instructions with test report - CE conformity declaration Incl. Special accessories, u. a .: Article no. 5200 B Steel holder head B, type Multifix (without tool holder) Article no. 6405 DA3A-470-1000 Digital Position Indicator ARBAH (Made in EU) 1 for SJ-470 / 1000S, including counter, 3 scales, Stands, covers and mounting Article no. 5300 3544-250-6 3 jaw lathe chucks BISON, steel body Ø 250 mm, Camlock D-6, concentric clamping, bore Ø 76 mm each with a set of one-piece turning and drilling jaws
            - swing diameter (max) 470 mm
            - turning diameter (max) 235 mm
            - worpiece length max. 1000 mm
            - swing in gap 690 mm
            - spindle bore diameter 58 mm
            - spindle revolutions (min) 20 /min
            - spindle revolutions (max) 2000 /min
            - number of gears 12
            - spindle diameter 58 mm
            - advance z-axis (min.) 0.05 mm/r
            - advance z-axis (max.) 0.82 mm/r
            - advance x-axis (min.) 0.02 mm/r
            - advance x-axis (max.) 0.4 mm/r
            Description :
            << Machine is in stock at 6500 Landeck / TIROL and can be viewed under power.>>
            The machine is available with peak widths from 760mm to 2000mm.
            This offer is a storage machine at a promotional price
            (Original price incl. These options: 28962.- )

            We will send you a non-binding offer with your desired specifications.
            -> Description as well as standard and special equipment can be found in the PDF file.

            This storage machine is equipped as follows:
            Including the following standard accessories, u. a .:
            - 3-way precision spindle with SKF (FAG) bearings
            - Spindle brake mechanically
            - Complete electrical equipment
            - Coolant device with rear splash guard
            and splash guard on the slide
            - Food protection
            - Shift rod with 3 adjustable cams
            - Solid grain tip
            - Covered tension spindle
            - Set of machine mounting plates
            - Machine lamp 24 V
            - Operating instructions with test report
            - CE conformity declaration

            Incl. Special accessories, u. a .:
            Article no. 5200 B
            Steel holder head B, type Multifix
            (without tool holder)

            Article no. 6405 DA3A-470-1000
            Digital Position Indicator ARBAH (Made in EU) 1
            for SJ-470 / 1000S, including counter, 3 scales,
            Stands, covers and mounting

            Article no. 5300 3544-250-6
            3 jaw lathe chucks BISON, steel body Ø 250 mm,
            Camlock D-6, concentric clamping, bore Ø 76 mm
            each with a set of one-piece turning and drilling jaws
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center FAT FCT-700


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-163 · CNC Turning- and Milling Center

          FAT - FCT-700 - - 2005 - SIEMEMS 840 D Shop Turn

          Technical details
          turning diameter 700 mm︱turning length 2100 mm︱control SIEMEMS 840 D Shop Turn ︱feed 0-20 m/min︱spindle turning speed - stepless 2000 U/min︱c-axis Ja ︱turret (x-stations) 12 ︱speeds of tool U/min︱turning diameter over slide 490 mm︱tailstock quill taper MT 5 ︱dia. of quill 120 mm︱quill stroke 100 mm︱spindle bore 140 mm︱total power requirement kW︱weight of the machine ca. 13 t︱dimensions of the machine ca. 5,4 x 2,3 x 2,5 m︱
          This FAT Haco FCT-700 CNC lathe is in very good condition and available immediately.
            turning diameter 700 mm
            turning length 2100 mm
            control SIEMEMS 840 D Shop Turn
            feed 0-20 m/min
            spindle turning speed - stepless 2000 U/min
            c-axis Ja
            turret (x-stations) 12
            turning diameter over slide 490 mm
            tailstock quill taper MT 5
            dia. of quill 120 mm
            quill stroke 100 mm
            spindle bore 140 mm
            weight of the machine ca. 13 t
            dimensions of the machine ca. 5,4 x 2,3 x 2,5 m
            Description :
            This FAT Haco FCT-700 CNC lathe is in very good condition and available
            immediately.
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled EMCO E 300-2000


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-160 · Lathe - cycle-controlled

          EMCO - E 300-2000 - - 2000 - FAGOR 8055

          Technical details
          turning diameter 340 mm︱turning length 2000 mm︱control FAGOR 8055 ︱swing diameter 550 mm︱spindle bore 108 mm︱spindle turning speed - stepless 2500 U/min︱power capacity 16.5 kW︱quill stroke 220 mm︱diameter of quill 100 mm︱total power requirement 19 kW︱weight of the machine ca. 4300 kg︱dimensions of the machine ca. 4300 x 1600 x 1800 m︱
          This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders
            turning diameter 340 mm
            turning length 2000 mm
            control FAGOR 8055
            swing diameter 550 mm
            spindle bore 108 mm
            spindle turning speed - stepless 2500 U/min
            power capacity 16.5 kW
            quill stroke 220 mm
            diameter of quill 100 mm
            total power requirement 19 kW
            weight of the machine ca. 4300 kg
            dimensions of the machine ca. 4300 x 1600 x 1800 m
            Description :
            This EMCO E 300x2000 cycle lathe is supplied complete with all accessories.
            Description:
            - Coolant device
            - 1 piece Luenette open 20-145mm
            - 1 piece closed guide 15-185mm
            - 1 piece face plate
            - 1 piece three-jaw chuck
            - 1 piece wedge bar chuck D=400mm
            - Parat 4-fold tool holder
            - Various tool holders
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled BOEHRINGER DUS 560x1500


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-106 · Lathe - cycle-controlled

          BOEHRINGER - DUS 560x1500 - - 1996 - SIEMENS 810D

          Technical details
          turning diameter 560 mm︱turning length 1500 mm︱control SIEMENS 810D ︱taper in tailstock-quill MK 5 ︱turning speeds 2500 U/min︱spindle bore 62 mm︱total power requirement 19 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. 3,8 x 1,8 x 1,9 m︱
          This BOEHRINGER DUS 560 is in very good condition
            turning diameter 560 mm
            turning length 1500 mm
            control SIEMENS 810D
            taper in tailstock-quill MK 5
            turning speeds 2500 U/min
            spindle bore 62 mm
            total power requirement 19 kW
            weight of the machine ca. 4 t
            dimensions of the machine ca. 3,8 x 1,8 x 1,9 m
            Description :
            This BOEHRINGER DUS 560 is in very good condition
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled CONTUR DIALOG H-66


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-8360 · Lathe - cycle-controlled

          CONTUR - DIALOG H-66 - - - SIEMENS 840 D + SHOPTURN

          Technical details
          turning diameter 660 mm︱turning length / mm︱control SIEMENS 840 D + SHOPTURN 660 mm︱ 400 mm︱ 105 mm︱ 2 /min︱ 2500 /min︱ 2 18.8 kW︱ 21000 Nm︱ 5 mm/min︱ 3200 mm/min︱ 5 mm/min︱ 3200 mm/min︱ 8000 mm/min︱ 8000 mm/min︱
            turning diameter 660 mm
            turning length / mm
            control SIEMENS 840 D + SHOPTURN
            660 mm
            400 mm
            105 mm
            2 /min
            2500 /min
            2
            18.8 kW
            21000 Nm
            5 mm/min
            3200 mm/min
            5 mm/min
            3200 mm/min
            8000 mm/min
            8000 mm/min
          Datasheet
          Request / Contact

          Turning Automatic Lathe - swiss lathe

          used  Turning Automatic Lathe - swiss lathe STAR ECAS 32T


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-110 · Turning Automatic Lathe - swiss lathe

          STAR - ECAS 32T - - 2008 - YASKAWA SIEMENS 840 DI V2

          Technical details
          turning diameter over bed 32 mm︱spindle passage 32 mm︱turning length 125 mm︱Control YASKAWA SIEMENS 840 DI V2 ︱clamping diameter 32 mm︱spindle turning speed range 7000 U/min︱workpiece length - max. 150 mm︱feed 0 - 2000 mm/min︱total power requirement kW︱weight of the machine ca. 5,7 t︱dimensions of the machine ca. 10,5 x 2 x 1,9 m︱
          The sliding headstock automatic lathe is in good condition and ready for immediate use. with tool holders and spare parts. >> Two identical STAR 32T sliding headstock lathes are available << The bar feeder automatically fills the bars to the bar magazine. The bar magazine is an FMB turbo 3-36. The machine has 11 axes: X1, X2, X3 Y1, Y2, Y3 Z1, Z2, Z3 C1, C2
            turning diameter over bed 32 mm
            spindle passage 32 mm
            turning length 125 mm
            Control YASKAWA SIEMENS 840 DI V2
            clamping diameter 32 mm
            spindle turning speed range 7000 U/min
            workpiece length - max. 150 mm
            feed 0 - 2000 mm/min
            weight of the machine ca. 5,7 t
            dimensions of the machine ca. 10,5 x 2 x 1,9 m
            Description :
            The sliding headstock automatic lathe is in good condition and ready for
            immediate use.
            with tool holders and spare parts.
            >> Two identical STAR 32T sliding headstock lathes are available <<
            The bar feeder automatically fills the bars to the bar magazine.
            The bar magazine is an FMB turbo 3-36.
            The machine has 11 axes:
            X1, X2, X3
            Y1, Y2, Y3
            Z1, Z2, Z3
            C1, C2
          Datasheet
          Request / Contact
          used  Turning Automatic Lathe - swiss lathe STAR ECAS 32T


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-109 · Turning Automatic Lathe - swiss lathe

          STAR - ECAS 32T - - 2007 - YASKAWA SIEMENS 840 DI V2

          Technical details
          turning diameter over bed 32 mm︱spindle passage 32 mm︱turning length 125 mm︱Control YASKAWA SIEMENS 840 DI V2 ︱spindle turning speed range 7000 U/min︱workpiece length - max. 150 mm︱clamping diameter 32 mm︱feed 0 - 2000 mm/min︱total power requirement kW︱weight of the machine ca. 5,7 t︱dimensions of the machine ca. 10,5 x 2 x 1,9 m︱
          The sliding headstock automatic lathe is in good condition and ready for immediate use. with tool holders and spare parts. >> Two identical STAR 32T sliding headstock lathes are available << The bar feeder automatically fills the bars to the bar magazine. The bar magazine is an FMB turbo 3-36. The machine has 11 axes: X1, X2, X3 Y1, Y2, Y3 Z1, Z2, Z3 C1, C2
            turning diameter over bed 32 mm
            spindle passage 32 mm
            turning length 125 mm
            Control YASKAWA SIEMENS 840 DI V2
            spindle turning speed range 7000 U/min
            workpiece length - max. 150 mm
            clamping diameter 32 mm
            feed 0 - 2000 mm/min
            weight of the machine ca. 5,7 t
            dimensions of the machine ca. 10,5 x 2 x 1,9 m
            Description :
            The sliding headstock automatic lathe is in good condition and ready for
            immediate use.
            with tool holders and spare parts.
            >> Two identical STAR 32T sliding headstock lathes are available <<
            The bar feeder automatically fills the bars to the bar magazine.
            The bar magazine is an FMB turbo 3-36.
            The machine has 11 axes:
            X1, X2, X3
            Y1, Y2, Y3
            Z1, Z2, Z3
            C1, C2
          Datasheet
          Request / Contact
          used  Turning Automatic Lathe - swiss lathe TRAUB TNK 36


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-38209 · Turning Automatic Lathe - swiss lathe

          TRAUB - TNK 36 - - 2002 -

          Technical details
          turning diameter over bed / mm︱spindle passage 36 mm︱turning length 100 mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 2 ︱- - counter spindle: yes ︱- number of turrets 1 ︱- live positions: yes ︱- number of c-axes 2 ︱- number of y-axes 2 ︱WORKING RANGE TURNING ︱- bar diameter (max) 36 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 6300 /min︱- drive power S6 40% 10.7 kW︱COUNTER SPINDLE ︱- spindle revolutions (max) 6300 /min︱ELECTRICAL SPECIFICATIONS ︱- mains voltage 400 V︱
            turning diameter over bed / mm
            spindle passage 36 mm
            turning length 100 mm
            - number of spindles 2
            - number of turrets 1
            - number of c-axes 2
            - number of y-axes 2
            - bar diameter (max) 36 mm
            - spindle revolutions (min) 6300 /min
            - drive power S6 40% 10.7 kW
            - spindle revolutions (max) 6300 /min
            - mains voltage 400 V
          Datasheet
          Request / Contact
          used  Turning Automatic Lathe - swiss lathe TRAUB TNK 28


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-38259 · Turning Automatic Lathe - swiss lathe

          TRAUB - TNK 28 - - 1999 -

          Technical details
          turning diameter over bed / mm︱spindle passage 28 mm︱turning length 100 mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of turrets 2 ︱- live positions: yes ︱WORKING RANGE TURNING ︱- turning diameter (max) 28 mm︱- bar diameter (max) 28 mm︱- worpiece length max. 3000 mm︱MAIN SPINDLE ︱- c-axis: yes ︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 2600 mm︱- space requirements -front/back- 2400 mm︱- total height 1700 mm︱ATTACHMENTS (TURNING) ︱- - bar length (max) 3000 mm︱- - bar diameter (max) 28 mm︱
            turning diameter over bed / mm
            spindle passage 28 mm
            turning length 100 mm
            - number of turrets 2
            - turning diameter (max) 28 mm
            - bar diameter (max) 28 mm
            - worpiece length max. 3000 mm
            - space requirements -left/right. 2600 mm
            - space requirements -front/back. 2400 mm
            - total height 1700 mm
            - - bar length (max) 3000 mm
            - - bar diameter (max) 28 mm
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal TOS KURIM FSQ 100


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-39191 · Machining Center - Universal

          TOS KURIM - FSQ 100 - - 2001 - HEIDENHAIN TNC 426

          Technical details
          x travel 1600 mm︱y travel 1000 mm︱z travel 780 mm︱-------------------------------------------------- ︱WORKING RANGE -CUBIC- ︱- number of processing axes (excl parallel axes) 5 ︱- X-axis travel 1600 mm︱- Y-axis travel 1000 mm︱- Z-axis travel 780 mm︱TABLE ︱- table surface (left-right) 1000 mm︱- table surface (front-back) 1000 mm︱- workpiece load (max) 6000 kg︱- rotation axis: C ︱- - positioning/indexing 0.001 °︱MILLING SPINDLE / HEAD ︱- spindle type: tilting head ︱- - positioning/indexing 2.5 °︱- - positioning/indexing 2.5 °︱- spindle revolutions (max) 2500 /min︱
          The machine is in very good condition and available immediately.
            x travel 1600 mm
            y travel 1000 mm
            z travel 780 mm
            - number of processing axes (exc. 5
            - X-axis travel 1600 mm
            - Y-axis travel 1000 mm
            - Z-axis travel 780 mm
            - table surface (left-right) 1000 mm
            - table surface (front-back) 1000 mm
            - workpiece load (max) 6000 kg
            - - positioning/indexing 0.001 °
            - - positioning/indexing 2.5 °
            - - positioning/indexing 2.5 °
            - spindle revolutions (max) 2500 /min
            Description :
            The machine is in very good condition and available immediately.
          Datasheet
          Request / Contact

          Portal - Machining Center

          used  Portal - Machining Center WALDRICH-COBURG MULTITEC 2500 AP


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28 · Portal - Machining Center

          WALDRICH-COBURG - MULTITEC 2500 AP - - 2002 - SIEMENS 840 D

          Technical details
          x-axis 4000 mm︱y-axis 3500 mm︱z-axis 1500 mm︱Control SIEMENS 840 D ︱w-axis 1500 mm︱column daylight 2500 mm︱surface area 3000 x 2000 mm︱workpiece weight 10000 kg︱spindle turning speed range 5-6000 U/min︱transmission ratio 2 ︱power capacity - milling spindle 45 kW︱dist. cutter spindle - workpiece spindle 3500 mm︱max. torque on the spindle 1250 Nm︱tool change unit 200 -fach︱tool diameter 135 / 250 mm︱weight of tools max. 50 kg︱tool length - max. 400 mm︱tool taper ISO SK-50 ︱total power requirement kW︱
            x-axis 4000 mm
            y-axis 3500 mm
            z-axis 1500 mm
            Control SIEMENS 840 D
            w-axis 1500 mm
            column daylight 2500 mm
            surface area 3000 x 2000 mm
            workpiece weight 10000 kg
            spindle turning speed range 5-6000 U/min
            transmission ratio 2
            power capacity - milling spindle 45 kW
            dist. cutter spindle - workpiece. 3500 mm
            max. torque on the spindle 1250 Nm
            tool change unit 200 -fach
            tool diameter 135 / 250 mm
            weight of tools max. 50 kg
            tool length - max. 400 mm
            tool taper ISO SK-50
          Datasheet
          Request / Contact

          Radial Drilling Machine

          used  Radial Drilling Machine CSEPEL HFR 75/2000


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-123 · Radial Drilling Machine

          CSEPEL - HFR 75/2000 - - 1978 -

          Technical details
          bore capacity in steel (diameter) 75 mm︱arm length 2000 mm︱workpiece height max. mm︱tool taper MK 5 ︱spindle diameter mm︱spindle turning speed range 5 - 2000 U/min︱quill stroke 450 mm︱distance spindle /table 1700 mm︱surface area 2300 x 1100 mm︱total power requirement kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. 3,3 x 1,2 x 3,4 m︱
            bore capacity in steel (diameter. 75 mm
            arm length 2000 mm
            tool taper MK 5
            spindle turning speed range 5 - 2000 U/min
            quill stroke 450 mm
            distance spindle /table 1700 mm
            surface area 2300 x 1100 mm
            weight of the machine ca. 8 t
            dimensions of the machine ca. 3,3 x 1,2 x 3,4 m
          Datasheet
          Request / Contact
          used  Radial Drilling Machine STANKO 2H55


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-40280 · Radial Drilling Machine

          STANKO - 2H55 - - 1973 -

          Technical details
          bore capacity in steel diameter 55 mm︱arm length 1600 mm︱workpiece height max 1600 mm︱WORKING RANGE -BORING- ︱- drilling capacity full bore (steel) 55 mm︱- throat (max) 1600 mm︱- workpiece height (max) 1600 mm︱MILLING SPINDLE / HEAD ︱- tool fixture: MK 5 ︱- sleeve stroke 350 mm︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 2700 mm︱- space requirements -front/back- 1100 mm︱- total height 3400 mm︱- total weight approx. 4500 kg︱
            bore capacity in steel diameter 55 mm
            arm length 1600 mm
            workpiece height max 1600 mm
            - drilling capacity full bore (s. 55 mm
            - throat (max) 1600 mm
            - workpiece height (max) 1600 mm
            - sleeve stroke 350 mm
            - space requirements -left/right. 2700 mm
            - space requirements -front/back. 1100 mm
            - total height 3400 mm
            - total weight approx. 4500 kg
          Datasheet
          Request / Contact
          used  Radial Drilling Machine LODIFLEX CASER


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-33855 · Radial Drilling Machine

          LODIFLEX CASER - - - -

          Technical details
          bore capacity in steel diameter / mm︱arm length 1000 mm︱workpiece height max / mm︱-------------------------------------------------- ︱WORKING RANGE -BORING- ︱- throat (max) 1000 mm︱- sleeve stroke 250 mm︱MILLING SPINDLE / HEAD / ︱- spindle revolutions (min) 47.5 /min︱- spindle revolutions (max) 2120 /min︱- spindle diameter 60 mm︱- tool fixture: MK 4 ︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 2000 mm︱- space requirements -front/back- 750 mm︱- total height 2160 mm︱- total weight approx. 2500 kg︱
          Machine is not 100% OK, and needs an overhaul. - Height adjustment and cross adjustment must be repaired
            bore capacity in steel diameter / mm
            arm length 1000 mm
            workpiece height max / mm
            - throat (max) 1000 mm
            - sleeve stroke 250 mm
            MILLING SPINDLE / HEAD /
            - spindle revolutions (min) 47.5 /min
            - spindle revolutions (max) 2120 /min
            - spindle diameter 60 mm
            - space requirements -left/right. 2000 mm
            - space requirements -front/back. 750 mm
            - total height 2160 mm
            - total weight approx. 2500 kg
            Description :
            Machine is not 100% OK, and needs an overhaul.
            - Height adjustment and cross adjustment must be repaired
          Datasheet
          Request / Contact

          Bed Type Milling Machine - Universal

          used  Bed Type Milling Machine - Universal SACHMAN T10GP


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-168 · Bed Type Milling Machine - Universal

          SACHMAN - T10GP - - 2001 - HEIDENHAIN TNC 426

          Technical details
          x-travel 2000 mm︱y-travel 800 mm︱z-travel 800 mm︱Control HEIDENHAIN TNC 426 ︱total power requirement kW︱weight of the machine ca. 15 t︱dimensions of the machine ca. m︱
          This SACHMAN is in good condition and is available immediately.
            x-travel 2000 mm
            y-travel 800 mm
            z-travel 800 mm
            Control HEIDENHAIN TNC 426
            weight of the machine ca. 15 t
            Description :
            This SACHMAN is in good condition and is available immediately.
          Datasheet
          Request / Contact

          Milling Machine - Vertical

          used  Milling Machine - Vertical MAHO MH 2000


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-111 · Milling Machine - Vertical

          MAHO - MH 2000 - - 1986 - PHILIPS 432

          Technical details
          x-travel 1600 mm︱y-travel 1000 mm︱z-travel 650 mm︱quill stroke 125 mm︱spindle turning speed range 40 - 2000 U/min︱tool taper SK-40 ︱table surface area 1000 x 650 mm︱table load 4 t︱rapid traverse 6 m/min︱feed 1 - 3000 mm/min︱Control PHILIPS 432 ︱total power requirement kW︱weight of the machine ca. 11,5 t︱dimensions of the machine ca. 6,2 x 4,8 x 2,9 m︱
          The MAHO is 100% functional and can be viewed under power by arrangement. can be inspected Description: Number of axles: 5 Axle designation: X, Y, Z, B, A Speed range: 0, 40, 50, 100, 125, 160, 200, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000rpm Feed range: 0-4000 Rapid traverse: 6000 Special features: Horizontal-vertical spindle Rotary table can be set up (can be set up at different places on the table) Only fixed rotation ranges can be set
            x-travel 1600 mm
            y-travel 1000 mm
            z-travel 650 mm
            quill stroke 125 mm
            spindle turning speed range 40 - 2000 U/min
            tool taper SK-40
            table surface area 1000 x 650 mm
            table load 4 t
            rapid traverse 6 m/min
            feed 1 - 3000 mm/min
            Control PHILIPS 432
            weight of the machine ca. 11,5 t
            dimensions of the machine ca. 6,2 x 4,8 x 2,9 m
            Description :
            The MAHO is 100% functional and can be viewed under power by arrangement.
            can be inspected
            Description:
            Number of axles: 5
            Axle designation: X, Y, Z, B, A
            Speed range: 0, 40, 50, 100, 125, 160, 200, 315, 400, 500,
            630, 800, 1000, 1250, 1600, 2000rpm
            Feed range: 0-4000
            Rapid traverse: 6000
            Special features: Horizontal-vertical spindle

            Rotary table can be set up (can be set up at different places on the table)

            Only fixed rotation ranges can be set
          Datasheet
          Request / Contact

          milling machining centers - universal

          used  milling machining centers - universal EMCO MaxxMill 500


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-131 · milling machining centers - universal

          EMCO - MaxxMill 500 - - 2014 - SIEMENS 840D

          Technical details
          x-travel 750 mm︱y-travel 550 mm︱z-travel 500 mm︱Control SIEMENS 840D ︱B-axis (table) +-100 °︱c-axis 360 °︱spindle turning speed range 0 - 15000 U/min︱tool taper ISO SK-40 ︱workpiece weight 250 kg︱tool change unit 30 -fach︱rapid traverse 30 m/min︱table dimension - longitudinal 600 mm︱table dimension - cross 600 mm︱total power requirement 26,4 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 3,5 x 2,45 x 2,8 m︱
          This EMCO MaxxMill 500 machining centre is in good condition. can be inspected at any time by arrangement under chip at the seller. Emco Maxxmill500 built in 2014: Machine hours 20,939 h Spindle hours 6,731 h Operating hours (machining) 5,042 h
            x-travel 750 mm
            y-travel 550 mm
            z-travel 500 mm
            Control SIEMENS 840D
            B-axis (table) +-100 °
            c-axis 360 °
            spindle turning speed range 0 - 15000 U/min
            tool taper ISO SK-40
            workpiece weight 250 kg
            tool change unit 30 -fach
            rapid traverse 30 m/min
            table dimension - longitudinal 600 mm
            table dimension - cross 600 mm
            total power requirement 26,4 kW
            weight of the machine ca. 10 t
            dimensions of the machine ca. 3,5 x 2,45 x 2,8 m
            Description :
            This EMCO MaxxMill 500 machining centre is in good condition.
            can be inspected at any time by arrangement under chip at the seller.

            Emco Maxxmill500 built in 2014:
            Machine hours 20,939 h
            Spindle hours 6,731 h
            Operating hours (machining) 5,042 h
          Datasheet
          Request / Contact
          used  milling machining centers - universal EMCO MaxxMill 500


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-132 · milling machining centers - universal

          EMCO - MaxxMill 500 - - 2012 - SIEMENS 840D

          Technical details
          x-travel 750 mm︱y-travel 550 mm︱z-travel 500 mm︱Control SIEMENS 840D ︱tool taper ISO SK-40 ︱tool change unit 30 -fach︱rapid traverse 30 m/min︱table - swivable +/- 100 °︱table rotating 360 °︱table dimension - longitudinal 600 mm︱table dimension - cross 600 mm︱workpiece weight 250 kg︱spindle turning speed range 0-15000 U/min︱total power requirement 26,4 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 3,5 x 2,45 x 2,8 m︱
          This EMCO MaxxMill 500 machining centre is in good condition. can be inspected at any time by arrangement under chip at the seller. Emco Maxxmill500 Bj. 2012: Maschinenstunden 19.125 h Spindelstunden 4.954 h Betriebsstunden (zerspanen) 3.483 h
            x-travel 750 mm
            y-travel 550 mm
            z-travel 500 mm
            Control SIEMENS 840D
            tool taper ISO SK-40
            tool change unit 30 -fach
            rapid traverse 30 m/min
            table - swivable +/- 100 °
            table rotating 360 °
            table dimension - longitudinal 600 mm
            table dimension - cross 600 mm
            workpiece weight 250 kg
            spindle turning speed range 0-15000 U/min
            total power requirement 26,4 kW
            weight of the machine ca. 10 t
            dimensions of the machine ca. 3,5 x 2,45 x 2,8 m
            Description :
            This EMCO MaxxMill 500 machining centre is in good condition.
            can be inspected at any time by arrangement under chip at the seller.

            Emco Maxxmill500 Bj. 2012:
            Maschinenstunden 19.125 h
            Spindelstunden 4.954 h
            Betriebsstunden (zerspanen) 3.483 h
          Datasheet
          Request / Contact
          used  milling machining centers - universal HERMLE C600U


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-91 · milling machining centers - universal

          HERMLE - C600U - - 2001 - HEIDENHAIN TNC 430

          Technical details
          x-travel 600 mm︱y-travel 450 mm︱z-travel 450 mm︱spindle turning speed range 16000 U/min︱control HEIDENHAIN TNC 430 ︱Number of axles 5 simultan︱table rotating 360 °︱table - swivable Grad︱table - swivable Grad︱taper ISO SK-40 ︱table diameter 280 mm︱rapid traverse 30wer m/min︱tool change unit 30 -fach︱total power requirement kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 3100 x 2400 x 2500 m︱
          his HERMLE C600U is in very good condition and available immediately. Hours on: - Machine ON: 65'656h - Spindle ON: 28'281h Equipment & Description: - Coolant outside with 6bar 3 nozzles - Manual canopy - Electr. heat compensation - Electr. handwheel iTNC - Measuring probe HEIDENHAIN - Blum tool breakage control - Documentation / Operating instructions - NEW air filter system CABARON type: COB-H10-2 (year of construction 2012 never in use) Option: - Div. tool holders ISO SK-40, 109 pcs.
            x-travel 600 mm
            y-travel 450 mm
            z-travel 450 mm
            spindle turning speed range 16000 U/min
            control HEIDENHAIN TNC 430
            Number of axles 5 simultan
            table rotating 360 °
            taper ISO SK-40
            table diameter 280 mm
            rapid traverse 30wer m/min
            tool change unit 30 -fach
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 3100 x 2400 x 2500 m
            Description :
            his HERMLE C600U is in very good condition and available immediately.

            Hours on:
            - Machine ON: 65'656h
            - Spindle ON: 28'281h

            Equipment & Description:
            - Coolant outside with 6bar 3 nozzles
            - Manual canopy
            - Electr. heat compensation
            - Electr. handwheel iTNC
            - Measuring probe HEIDENHAIN
            - Blum tool breakage control
            - Documentation / Operating instructions
            - NEW air filter system CABARON type: COB-H10-2 (year of construction 2012
            never in use)

            Option:
            - Div. tool holders ISO SK-40, 109 pcs.

          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   

            Profil trgovca: MS Maschinenhandel GmbH

          Kontaktirajte trgovca



            MS Maschinenhandel GmbH
           Unterdorf 34
            6532 - Ladis
            Austrija
            + 43 547221907 "> + 43 547221907
            + 43 54722190722
            info@ms-maschinen.at
            www.ms-maschinen.at

          Profil trgovca

          ProdEq Group - Partner industrije.
          Trgovina na veliko strojevima za obradu metala.
           
          Prodajemo i kupujemo:
          • Masinski alat
          • strojevi za proizvodnju metala
          • industrijsku opremu
          • cjelovite biljke
          internacionalnosti:
          Naše međunarodna prodajna mreža omogućuje pristup globalnim tržištima rabljenih / rabljenih strojeva.


          Online katalog strojeva:
          Pretražujte i pronađite željenu opremu i alatni alat (CNC ili ne-CNC) u našem online direktoriju. Svi strojevi za prodaju objavljeni su sa sveobuhvatnim informacijama.

          Veliki projekti - mali projekti:
          Mi ostvarujemo dražbe i likvidacije i obavljamo prodaju vaše višak opreme. Obratite nam se na bilo koju nadolazeću prodaju višak imovine. Trgovamo pojedinačni strojevi kao i kompletnih industrijskih postrojenja.

          Ekspertiza:
          Bez obzira na to ako prodajete ili kupite rabljene strojeve ili opremu. Na temelju našeg ocjenjivanja i vaše odluke o kupnji temeljite svoju prodajnu odluku o našem tehničkom savjetu.

          Više nego polovno:
          Također trgovamo odabranim portfeljem tvrtke novu opremu, pitajte nas.


          Trgovina i usluga:
          Zatražite usluge nakon prodaje, kao što su demontaža, remont, prijevoz, uvoz i izvoz i financiranje.

          Strojevi i oprema:


          ProdEq Trading GmbH
          Reckholder 1, 9527 Niederhelfenschwil, Švicarska


          ProdEq Maschinenhandel GmbH
          Unterdorf 34, 6532 Ladis, Austrija


          ProdEq Deutschland GmbH
          Weberweg 2, 42499 Hückeswagen, Njemačka


          Post-Venta Carreras SA
          Pol. Ind Els Plans d'Arau, C / Nicolau Copèrnic 2, 08787 La Pobla de Claramunt, Španjolska


          Guerrieri srl
          Piazza Giosuè Carducci 6, 21100 Varese (VA), Italija


          ProdEq doo Trgovina z industrijskim strojem
          Opekarniska 4, 2327 utrka, Slovenija


          Predstavnički ured ProdEq Maschinenhandel GmbH
          16110 Nilüfer / Bursa, Türkei


          Drugi predstavništava: Meksiku, Iranu
          Za više informacija kontaktirajte jedan od gore navedenih ureda ProdEq.




          MS Maschinenhandel GmbH   6532 - Ladis Unterdorf 34 Österreich
          MS Maschinenhandel GmbH

          Unterdorf 34



          Contact Trader


            MS Maschinenhandel GmbH
           Unterdorf 34
            6532 - Ladis
            Österreich
            +43 547221907
            +43 54722190722
            info@ms-maschinen.at
            www.ms-maschinen.at
            Contact person:

            USt.Id.Nr.: ATU 62723057
          Firmenbuchnummer: FN 280087 v
          USt.Id.Nr.: DE 257366940 / Steuernummer: 182 / 123 / 26816
          EORI-Nr.: ATEOS1000012994





          Machine category


          Abkantpresse - hydraulisch · Bandsäge · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Brennschneidemaschine · CNC Dreh- und Fräszentrum · Doppel-Gehrungsäge · Drehmaschine - zyklengesteuert · Fahrständerfräsmaschine · Feinstanzpresse · Flachschleifmaschine - Horizontal · Fräsmaschine - Universal · Fräsmaschine - Vertikal · Honmaschine - Innen - Horizontal · Kompressor · Kompressor und Druckluftaufbereitung · Koordinatenmeßmaschine · Langdrehautomat · Laserschneidmaschine · Leit- und Zugspindeldrehmaschine · Messmaschine · Meßmittel · Portal - Bearbeitungszentrum · Portalfräsmaschine · Radialbohrmaschine · Spritzgiessmaschine bis 5000 KN · Tafelschere - mechanisch · Tuschierpresse · Wasserstrahlschneidanlage · Werkzeug Voreinstellgerät ·