Europska mreža trgovaca dioničarskim strojevima

Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:

          Surface Grinding Machine - Horizontal

          Strojna lista: Stroj za brušenje površine - vodoravni


          Surface Grinding Machine - Horizontal

          used Grinding machines Surface Grinding Machine - Horizontal MOOS BP 50 100 2Ax


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18083 · Surface Grinding Machine - Horizontal

          MOOS - BP 50 100 2Ax - - 2018 -

          Technical details
          grinding length 1000 mm︱grinding width 500 mm︱workpiece height 522 mm︱table surface area 1300 x 600 mm︱grinding wheel size 355 x 50 mm︱grinding wheel hole diameter 127 mm︱distance spindle center to table 700 mm︱spindle turning speed range 0 - 2400 U/min︱spindle motor 7,5/11 kW︱table feed 1 - 25 m/min︱workpiece weight 1600 kg︱magnetic clamping plate, electical 1000 x 500 mm︱Control ︱total power requirement 23 kVA︱weight of the machine ca. 6000 kg︱dimensions of the machine ca. 3,98 x 2,9 x 2,8 m︱
          - NC operating panel 10". - Electromagnetic clamping plate - Diamond dresser with stand - Balancing mandrel with stator - Coolant unit with paper band filter & magnetic separator - Autom grinding cycle (2 axes), dressing cycle, compensation after dressing - Handwheels - Digital rulers (accuracy 0.001mm) Machine has only a few hundred running hours
            grinding length 1000 mm
            grinding width 500 mm
            workpiece height 522 mm
            table surface area 1300 x 600 mm
            grinding wheel size 355 x 50 mm
            grinding wheel hole diameter 127 mm
            distance spindle center to table 700 mm
            spindle turning speed range 0 - 2400 U/min
            spindle motor 7,5/11 kW
            table feed 1 - 25 m/min
            workpiece weight 1600 kg
            magnetic clamping plate, electic. 1000 x 500 mm
            total power requirement 23 kVA
            weight of the machine ca. 6000 kg
            dimensions of the machine ca. 3,98 x 2,9 x 2,8 m
            Description :
            - NC operating panel 10".
            - Electromagnetic clamping plate
            - Diamond dresser with stand
            - Balancing mandrel with stator
            - Coolant unit with paper band filter & magnetic separator
            - Autom grinding cycle (2 axes), dressing cycle, compensation after dressing
            - Handwheels
            - Digital rulers (accuracy 0.001mm)

            Machine has only a few hundred running hours
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ELB SMARTLINE BL 20 KGT


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-738146 · Surface Grinding Machine - Horizontal

          ELB - SMARTLINE BL 20 KGT - - 2013 -

          Technical details
          grinding length 2000 mm︱grinding width 750 mm︱workpiece height 610 mm︱total power requirement 30 kW︱weight of the machine ca. 13000 kg︱dimensions of the machine ca. 6000 x 3000 x 2800 mm︱
            grinding length 2000 mm
            grinding width 750 mm
            workpiece height 610 mm
            total power requirement 30 kW
            weight of the machine ca. 13000 kg
            dimensions of the machine ca. 6000 x 3000 x 2800 mm
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ASYST - JUNG A 525


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18440 · Surface Grinding Machine - Horizontal

          ASYST - JUNG - A 525 - - 2012 - PNC 100

          Technical details
          grinding length 600 mm︱grinding width 200 mm︱workpiece height 400 mm︱magnetic clamping plate, electical 600 x 200 mm︱Control PNC 100 ︱spindle turning speed - stepless 100 - 3800 U/min︱grinding motor 5 kW︱dimensions of grinding wheel 250 x 30 x 51 mm︱x-axis 600 mm︱y-axis 500 mm︱z-axis 230 mm︱table speeds 0,3 - 25 m/min︱traversing speed Y/Z: 0 - 1000 mm/min︱positioning accuracy Y/Z: 0,001 mm︱total power requirement ca 7 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 2,9 x 2,32 x 1,9 m︱
          - NC Control PNC 100 - elektron. Handwheel - coolant with Paperbandfilter - Magnetic Plate
            grinding length 600 mm
            grinding width 200 mm
            workpiece height 400 mm
            magnetic clamping plate, electic. 600 x 200 mm
            Control PNC 100
            spindle turning speed - stepless 100 - 3800 U/min
            grinding motor 5 kW
            dimensions of grinding wheel 250 x 30 x 51 mm
            x-axis 600 mm
            y-axis 500 mm
            z-axis 230 mm
            table speeds 0,3 - 25 m/min
            traversing speed Y/Z: 0 - 1000 mm/min
            positioning accuracy Y/Z: 0,001 mm
            total power requirement ca 7 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 2,9 x 2,32 x 1,9 m
            Description :
            - NC Control PNC 100
            - elektron. Handwheel
            - coolant with Paperbandfilter
            - Magnetic Plate
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal LODI RTM 150.50 CN


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-061649 · Surface Grinding Machine - Horizontal

          LODI - RTM 150.50 CN - - 2010 -

          Technical details
          grinding length 1500 mm︱grinding width 500 mm︱weight of the machine ca. 6 t︱dimensions of the machine ca. m︱total power requirement kW︱workpiece height mm︱
          automatic infeed electro magnet plate coolant device Technische Daten: /technical details Schleiflänge / grinding length 1500 mm Schleifbreite / grinding width 500 mm Magnetspannplatte / electro magnet plate 1500x500 mm Verfahrweg X-Hub / traverse path X-stroke 1850 mm Z-Hub Quer / Z-stroke cross 500 mm Abstand Tisch – Spindelmitte / distance table –spindle center 700 mm Tischgeschwindigkeit X / table speed X 1-33 m/min. Z / Z 0-3 m/min. Schleifscheibendimension / grinding wheel dimension 400x50x127 mm Antriebsleistung Schleifspindel / drive capacity grinding spindle 7,3 kW Gewicht der Maschine ca. / weight 6000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            grinding length 1500 mm
            grinding width 500 mm
            weight of the machine ca. 6 t
            Description :
            automatic infeed
            electro magnet plate
            coolant device

            Technische Daten: /technical details
            Schleiflänge / grinding length 1500 mm
            Schleifbreite / grinding width 500 mm
            Magnetspannplatte / electro magnet plate 1500x500 mm
            Verfahrweg X-Hub / traverse path X-stroke 1850 mm
            Z-Hub Quer / Z-stroke cross 500 mm
            Abstand Tisch – Spindelmitte / distance table –spindle center 700 mm
            Tischgeschwindigkeit X / table speed X 1-33 m/min.
            Z / Z 0-3 m/min.
            Schleifscheibendimension / grinding wheel dimension 400x50x127 mm
            Antriebsleistung Schleifspindel / drive capacity grinding spindle 7,3 kW
            Gewicht der Maschine ca. / weight 6000 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.


          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal MAEGERLE MFP 125-50-65


          • Mitrovic Industriemaschinen
          • Habsburger Straße 7
          • 73432 Aalen-Ebnat
          • Deutschland

          • +49 7308 811417-0
            +49 7308 811417-19
          • info@mitrovic-maschinen.de
            www.mitrovic-maschinen.de
          #1060-10826 · Surface Grinding Machine - Horizontal

          MAEGERLE - MFP 125-50-65 - - 2005 -

          Technical details
          grinding length 1250 mm︱grinding width 500 mm︱workpiece height 650 mm︱CNC control Sinumerik 840 D ︱Table dimensions 1250 x 500 mm︱longitudinal stroke 1250 mm︱vertical movement of grinding slide 650 mm︱cross movement of grinding slide 505 mm︱Distance table / spindle centre (horizontal pos.) 800 mm︱grinding motor 50 kW︱grinding wheel dia. x width 400 x 160 mm︱peripheral speed 45 m/sec︱feed range (X /Y/ Z) 30 / 3 / 3 mm/min︱min. input value 0,001 mm︱rotary dressing tool, table mounted type ︱dimensions of rotary dressing tools ø150 x 167 mm︱Bore diameter ø 52 mm︱turning speed range 400 - 6000 U/min︱balancing device Dittel MBA 5000 ︱total power requirement 82 kVA︱
          *mechanical and electrical retrofit in 2020 *1 year warranty *table dressing device MT150 x 167 mm (optional W=217 or W=237 mm) with servo motor (S2) *POLO coolant system 4000 l with Hyfra immersion cooler *NC-controlled water nozzle *SARA suction *DITTEL M5000 dynamic balancing system *new magnetic plate WAGNER 1.000 x 500 mm
            grinding length 1250 mm
            grinding width 500 mm
            workpiece height 650 mm
            CNC control Sinumerik 840 D
            Table dimensions 1250 x 500 mm
            longitudinal stroke 1250 mm
            vertical movement of grinding sl. 650 mm
            cross movement of grinding slide 505 mm
            Distance table / spindle centre . 800 mm
            grinding motor 50 kW
            grinding wheel dia. x width 400 x 160 mm
            peripheral speed 45 m/sec
            feed range (X /Y/ Z) 30 / 3 / 3 mm/min
            min. input value 0,001 mm
            dimensions of rotary dressing to. ø150 x 167 mm
            Bore diameter ø 52 mm
            turning speed range 400 - 6000 U/min
            balancing device Dittel MBA 5000
            total power requirement 82 kVA
            Description :
            *mechanical and electrical retrofit in 2020
            *1 year warranty
            *table dressing device MT150 x 167 mm (optional W=217 or W=237 mm) with servo
            motor (S2)
            *POLO coolant system 4000 l with Hyfra immersion cooler
            *NC-controlled water nozzle
            *SARA suction
            *DITTEL M5000 dynamic balancing system
            *new magnetic plate WAGNER 1.000 x 500 mm
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ABA / ZIERSCH & BALTRUSCH Starline 600E NC-SP


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4675 · Surface Grinding Machine - Horizontal

          ABA / ZIERSCH & BALTRUSCH - Starline 600E NC-SP - - 2004 -

          Technical details
          grinding length 600 mm︱grinding width 500 mm︱workpiece height 500 mm︱table-size 800x400 mm︱table speeds 1-35 m/min︱grinding wheel diameter 400 mm︱spindle drive 11 kW︱weight of the machine ca. 4.5 t︱
          SURFACE % PROFILE GRINDING MACHINE magnetic plate 600x300mm Dresser on table Exhausting device More details on www.marcels-maschinen.ch
            grinding length 600 mm
            grinding width 500 mm
            workpiece height 500 mm
            table-size 800x400 mm
            table speeds 1-35 m/min
            grinding wheel diameter 400 mm
            spindle drive 11 kW
            weight of the machine ca. 4.5 t
            Description :
            SURFACE % PROFILE GRINDING MACHINE

            magnetic plate 600x300mm
            Dresser on table
            Exhausting device

            More details on www.marcels-maschinen.ch
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ASYST A525


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-1072 · Surface Grinding Machine - Horizontal

          ASYST - A525 - - 2002 -

          Technical details
          grinding length 500 mm︱grinding width 200 mm︱workpiece height mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Sehr gut erhaltene Maschine mit CNC Profilabrichter. Youtube Video: https://www.youtube.com/watch?v=XXpf77SPgbA&feature=youtu.be Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.
            grinding length 500 mm
            grinding width 200 mm
            Description :
            Sehr gut erhaltene Maschine mit CNC Profilabrichter.

            Youtube Video:

            https://www.youtube.com/watch?v=XXpf77SPgbA&feature=youtu.be


            Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt.
            Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ABA EL 2006 ES


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-061664 · Surface Grinding Machine - Horizontal

          ABA - EL 2006 ES - - 2002 -

          Technical details
          grinding length 2000 mm︱grinding width 700 mm︱weight of the machine ca. 9,5 t︱total power requirement kW︱dimensions of the machine ca. m︱workpiece height mm︱
          Abamatic control electro magnet plate pneumatic flap dresser exhaustion device coolant device with paper filtering flanges Technische Daten / technical details: gr. Schleiflänge / max. grinding length 2000 mm gr. Schleifbreite / max. grinding width 700 mm Magnetspannplatte / magnet clamping plate 2000x600 mm Schleifscheibendrehzahl / grinding wheel speed 1000-2600 UpM / rpm Schleifscheibendurchmesser / grinding wheel dia. 400 mm Antriebsleistung Spindel / drive capacity spindle 11 kW Antriebsleistung komplett ca. / drive capacity 25 kW Gewicht der Maschine / weight 9500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            grinding length 2000 mm
            grinding width 700 mm
            weight of the machine ca. 9,5 t
            Description :
            Abamatic control
            electro magnet plate
            pneumatic flap dresser
            exhaustion device
            coolant device with paper filtering
            flanges

            Technische Daten / technical details:
            gr. Schleiflänge / max. grinding length 2000 mm
            gr. Schleifbreite / max. grinding width 700 mm
            Magnetspannplatte / magnet clamping plate 2000x600 mm
            Schleifscheibendrehzahl / grinding wheel speed 1000-2600 UpM / rpm
            Schleifscheibendurchmesser / grinding wheel dia. 400 mm
            Antriebsleistung Spindel / drive capacity spindle 11 kW
            Antriebsleistung komplett ca. / drive capacity 25 kW
            Gewicht der Maschine / weight 9500 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.



          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal KENT KGS-510 ND


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20155 · Surface Grinding Machine - Horizontal

          KENT - KGS-510 ND - - 2001 -

          Technical details
          grinding length 1000 mm︱grinding width 500 mm︱workpiece height 400 mm︱table-size 1030 x 500 mm︱max. table load 1000 kg︱dist. center of grinding spindle - table 575 mm︱table travel longitudinal 1140 mm︱table travel cross 540 mm︱table feed 7 - 25 m/min︱turning speed range - grinding wheel 1450 U/min︱grinding wheel size 355 x 38 x 127 mm︱magnetic clamping plate 1000 x 500 mm︱dressing device Kopfabrichter ︱coolant ︱voltage 380 V︱total power requirement 11,5 kW︱weight of the machine ca. 5,0 t︱dimensions of the machine ca. 3,55 x 2,05 x 2,45 m︱hydraulic power unit 0,80 x 0,95 x 0,90 m︱band filter unit 0,75 x 1,35 x 0,65 m︱
          - Serial-No.: 019907 - automatic vertical feed - electronic hand wheel - dressing device - paper band filter unit with magnetic separator
            grinding length 1000 mm
            grinding width 500 mm
            workpiece height 400 mm
            table-size 1030 x 500 mm
            max. table load 1000 kg
            dist. center of grinding spindle. 575 mm
            table travel longitudinal 1140 mm
            table travel cross 540 mm
            table feed 7 - 25 m/min
            turning speed range - grinding w. 1450 U/min
            grinding wheel size 355 x 38 x 127 mm
            magnetic clamping plate 1000 x 500 mm
            dressing device Kopfabrichter
            voltage 380 V
            total power requirement 11,5 kW
            weight of the machine ca. 5,0 t
            dimensions of the machine ca. 3,55 x 2,05 x 2,45 m
            hydraulic power unit 0,80 x 0,95 x 0,90 m
            band filter unit 0,75 x 1,35 x 0,65 m
            Description :
            - Serial-No.: 019907
            - automatic vertical feed
            - electronic hand wheel
            - dressing device
            - paper band filter unit with
            magnetic separator
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal DANOBAT PSG - 1000


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-H08117 · Surface Grinding Machine - Horizontal

          DANOBAT - PSG - 1000 - - 2001 - Fanuc 210i - M

          Technical details
          grinding length 1000 mm︱grinding width 600 mm︱workpiece height 450 mm︱Control Fanuc 210i - M ︱total power requirement 20 kW︱weight of the machine ca. 5,5 t︱dimensions of the machine ca. 3950 x 3150 x 2550 mm︱
          CNC surface grinding machine Clamping area of the table 1000 x 500 mm Clamping surface for magnetic particle board 1000 x 500 mm Largest grinding surface: L x W x H 1000 x 600 x 450 mm Largest distance from table to spindle center 650 mm Table speed in the longitudinal direction 1 - 30 m / min Max. Table load 1500 kg Grinding wheel: diameter x width x bore 400 x 50 x Ø 127 mm Grinding spindle drive 7.5 kW Spindle speed 1500 rpm Connected load 20 kW Space required L x W x H 3950 x 3150 x 2550 mm Weight 5500 kg Equipment CNC control Fanuc 210i - M Electro magnetic plate 1000 x 500 mm Coolant device with paper filter Several Grinding wheels with flanges Digital display Condition machine is in good condition
            grinding length 1000 mm
            grinding width 600 mm
            workpiece height 450 mm
            Control Fanuc 210i - M
            total power requirement 20 kW
            weight of the machine ca. 5,5 t
            dimensions of the machine ca. 3950 x 3150 x 2550 mm
            Description :
            CNC surface grinding machine

            Clamping area of the table 1000 x 500 mm
            Clamping surface for magnetic particle board 1000 x 500 mm
            Largest grinding surface: L x W x H 1000 x 600 x 450 mm
            Largest distance from table to spindle center 650 mm
            Table speed in the longitudinal direction 1 - 30 m / min
            Max. Table load 1500 kg
            Grinding wheel: diameter x width x bore 400 x 50 x Ø 127 mm
            Grinding spindle drive 7.5 kW
            Spindle speed 1500 rpm
            Connected load 20 kW
            Space required L x W x H 3950 x 3150 x 2550 mm
            Weight 5500 kg

            Equipment
            CNC control Fanuc 210i - M
            Electro magnetic plate 1000 x 500 mm
            Coolant device with paper filter
            Several Grinding wheels with flanges
            Digital display

            Condition machine is in good condition
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal BLOHM Planomat 412


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4381 · Surface Grinding Machine - Horizontal

          BLOHM - Planomat 412 - - 2000 -

          Technical details
          grinding length 1200 mm︱grinding width 400 mm︱workpiece height 500 mm︱table-size 1200x400 mm︱table speeds 0,03-30 m/min︱weight of the machine ca. 4.2 t︱
          Integrated balancing system Magnetic plate 1200x400mm More details on www.marcels-maschinen.ch
            grinding length 1200 mm
            grinding width 400 mm
            workpiece height 500 mm
            table-size 1200x400 mm
            table speeds 0,03-30 m/min
            weight of the machine ca. 4.2 t
            Description :
            Integrated balancing system
            Magnetic plate 1200x400mm

            More details on www.marcels-maschinen.ch
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ELB Perfekt BD 10 SPS-NK


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20013 · Surface Grinding Machine - Horizontal

          ELB - Perfekt BD 10 SPS-NK - - 2000 -

          Technical details
          grinding length 1000 mm︱grinding width 600 mm︱workpiece height 600 mm︱table-size 1360 x 590 mm︱max. table load 1050 kg︱table travel longitudinal 1100 mm︱table travel cross 560 mm︱table feed 2 - 26 m/min︱turning speed range - grinding wheel 1400 U/min︱power capacity 10 kW︱grinding wheel size Ø 400 x 100 x Ø 127 mm︱magnetic clamping plate 1000 x 600 mm︱dressing device Kopfabrichter ︱voltage 400 V︱band filter unit 1,15 x 1,00 x 0,90 m︱suction device 0,80 x 0,55 x 2,20 m︱total power requirement 19,0 kW︱weight of the machine ca. 6,3 t︱
          Machine geometry partly recond. (X-Axis Guide Ways regrinded) - Serial.No.: 50073112000 - control: SPS-NK - Surface- / Plunge grinding - autom. vertical feed - wheel dresser incl. compensation - paper band filter unit - mist extraction unit - coolant system - machine lamp
            grinding length 1000 mm
            grinding width 600 mm
            workpiece height 600 mm
            table-size 1360 x 590 mm
            max. table load 1050 kg
            table travel longitudinal 1100 mm
            table travel cross 560 mm
            table feed 2 - 26 m/min
            turning speed range - grinding w. 1400 U/min
            power capacity 10 kW
            grinding wheel size Ø 400 x 100 x Ø 127 mm
            magnetic clamping plate 1000 x 600 mm
            dressing device Kopfabrichter
            voltage 400 V
            band filter unit 1,15 x 1,00 x 0,90 m
            suction device 0,80 x 0,55 x 2,20 m
            total power requirement 19,0 kW
            weight of the machine ca. 6,3 t
            Description :
            Machine geometry partly recond.
            (X-Axis Guide Ways regrinded)
            - Serial.No.: 50073112000
            - control: SPS-NK
            - Surface- / Plunge grinding
            - autom. vertical feed
            - wheel dresser incl. compensation
            - paper band filter unit
            - mist extraction unit
            - coolant system
            - machine lamp
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal REFORM AR 35 Type U12


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-E05452 · Surface Grinding Machine - Horizontal

          REFORM - AR 35 Type U12 - - 2000 -

          Technical details
          grinding length 3500 mm︱grinding width 350 mm︱workpiece height 250 mm︱total power requirement 60 kW︱weight of the machine ca. 14 t︱dimensions of the machine ca. 7800 x 1900 x 3000 m︱
          CNC control Siemens 840 D Magnetic table 3500 x 350 mm, fixed Grinding height 250 mm Dresser on table Accuracy 0.01 mm parallelism Grinding motor 22 kW / 2910 1 / min. Grinding wheel 450 x 80 x 203 mm Table feed to 30 m / min. infinitely variable
            grinding length 3500 mm
            grinding width 350 mm
            workpiece height 250 mm
            total power requirement 60 kW
            weight of the machine ca. 14 t
            dimensions of the machine ca. 7800 x 1900 x 3000 m
            Description :
            CNC control Siemens 840 D
            Magnetic table 3500 x 350 mm, fixed
            Grinding height 250 mm
            Dresser on table
            Accuracy 0.01 mm parallelism
            Grinding motor 22 kW / 2910 1 / min.
            Grinding wheel 450 x 80 x 203 mm
            Table feed to 30 m / min. infinitely variable
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ELB PERFEKT BD 20 SPS-NK


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-729065 · Surface Grinding Machine - Horizontal

          ELB - PERFEKT BD 20 SPS-NK - - 1998 -

          Technical details
          grinding length 2000 mm︱grinding width 520 mm︱workpiece height 600 mm︱total power requirement 35 kW︱weight of the machine ca. 11.500 kg︱dimensions of the machine ca. m︱
          E L B Horizontal Hydraulic High Precision Surface Grinding Machine Model PERFEKT BD 20 PS-NK Year 1998 Ser.-No. 480 890198 ___________________________________________________________________ Grinding length max. 2.000 mm Grinding width max. 520 mm Working height under grinding wheel 600 mm ! Table size 2.360 x 590 mm Max. load on table approx. 1.350 kg Travels of XYZ-Axis 2.100/610/520 mm Measurement of grinding wheel (Øxwidthxbore) 400 x 100 x 127 mm Grinding wheel speeds infinitely variable. 1.000 - 2500 rpm Grinding spindle drive 15 kW Table Speed, hydraulically controlled 2 – 26 m/Min. Infeed rate of vertical adjustment, roughing /finishing 0,001 – 0,015 mm Grinding slide cross adjustment up to 1.200 mm/Min. Total electrical load approx. 35 kW - 415 V - 50 cycles Total weight approx. 11.500 kg Accessories / Special Features : • Construction according to the proven ELB System with machine basic in MICRO GRANITE with outstanding damping characteristics, the table and the grinding column is built in cast iron. • Equipped with ELB Infeed Control Model NK which permits fast and optimum grinding of workpieces and can be switched over from regular surface grinding to plunge grinding. Cycles can be setted with preadjustable infeed rates roughing and finishing, and machine stops when dimensions achieved. Final spark-out strokes can be presetted as well. Grinding head lifts off and table stops in loading position. Modern Control Panel with Digital displays for the axe positions and remaining values. • Automatic straight dressing device mounted above grinding wheel with compensation. • Fine Poled Magnetic Chuck 2.000 x 600 mm, with steplessly adjustable magnetizing and demagnetizing device. • Built-on Balancing device make MPM for continuous balancing during grinding process. • Vertical Quick-feed for the grinding spindle. • Large Coolant device with band filter unit, separate hydraulic system, separate switch cabinet,two chillers for coolant and hydraulic oil and with large oil mist filter unit. Manuals in English Language also control Panel Condition: good to very good – can be soon inspected under power here in stock, ideal machine for tool and mould shops, machine tool builders, etc. Delivery: ex stock – as inspected Payment : net – after completion of contract
            grinding length 2000 mm
            grinding width 520 mm
            workpiece height 600 mm
            total power requirement 35 kW
            weight of the machine ca. 11.500 kg
            Description :
            E L B
            Horizontal Hydraulic High Precision Surface Grinding Machine
            Model PERFEKT BD 20 PS-NK
            Year 1998 Ser.-No. 480 890198
            ___________________________________________________________________

            Grinding length max. 2.000 mm
            Grinding width max. 520 mm
            Working height under grinding wheel 600 mm !
            Table size 2.360 x 590 mm
            Max. load on table approx. 1.350 kg
            Travels of XYZ-Axis 2.100/610/520 mm

            Measurement of grinding wheel (Øxwidthxbore) 400 x 100 x 127 mm
            Grinding wheel speeds infinitely variable. 1.000 - 2500 rpm
            Grinding spindle drive 15 kW
            Table Speed, hydraulically controlled 2 – 26 m/Min.
            Infeed rate of vertical adjustment, roughing
            /finishing 0,001 – 0,015 mm
            Grinding slide cross adjustment up to 1.200 mm/Min.

            Total electrical load approx. 35 kW - 415 V - 50 cycles
            Total weight approx. 11.500 kg

            Accessories / Special Features :
            • Construction according to the proven ELB System with machine basic in
            MICRO GRANITE with outstanding damping characteristics, the table and
            the grinding column is built in cast iron.
            • Equipped with ELB Infeed Control Model NK which permits fast and optimum grinding of
            workpieces and can be switched over from regular surface grinding to
            plunge grinding.
            Cycles can be setted with preadjustable infeed rates roughing and
            finishing, and machine stops when dimensions achieved. Final spark-out
            strokes can be presetted as well.
            Grinding head lifts off and table stops in loading position. Modern
            Control Panel with Digital displays for the axe positions and remaining
            values.
            • Automatic straight dressing device mounted above grinding wheel with
            compensation.
            • Fine Poled Magnetic Chuck 2.000 x 600 mm, with steplessly adjustable
            magnetizing and demagnetizing device.
            • Built-on Balancing device make MPM for continuous balancing during
            grinding process.
            • Vertical Quick-feed for the grinding spindle.
            • Large Coolant device with band filter unit, separate hydraulic system,
            separate switch cabinet,two chillers for coolant and hydraulic oil and
            with large oil mist filter unit.
            Manuals in English Language also control Panel

            Condition: good to very good – can be soon inspected under power here in
            stock, ideal machine for tool and mould shops, machine tool
            builders, etc.
            Delivery: ex stock – as inspected
            Payment : net – after completion of contract


          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal OKAMOTO ACC-84 EX


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-713190 · Surface Grinding Machine - Horizontal

          OKAMOTO - ACC-84 EX - - 1998 -

          Technical details
          grinding length 800 mm︱grinding width 400 mm︱workpiece height 520 mm max.︱total power requirement 10 kW︱weight of the machine ca. 4500 kg︱dimensions of the machine ca. m︱
            grinding length 800 mm
            grinding width 400 mm
            workpiece height 520 mm max.
            total power requirement 10 kW
            weight of the machine ca. 4500 kg
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal MAEGERLE MGC 130


          • Mitrovic Industriemaschinen
          • Habsburger Straße 7
          • 73432 Aalen-Ebnat
          • Deutschland

          • +49 7308 811417-0
            +49 7308 811417-19
          • info@mitrovic-maschinen.de
            www.mitrovic-maschinen.de
          #1060-10829 · Surface Grinding Machine - Horizontal

          MAEGERLE - MGC 130 - - 1997 -

          Technical details
          grinding length 1250 mm︱grinding width 350 mm︱workpiece height 450 mm︱CNC control Sinumerik 840D ︱rotary table dia. 1200 mm︱Table dimensions 2 x (760 x 325) mm︱longitudinal stroke 800 mm︱vertical movement of grinding slide 450 mm︱cross movement of grinding slide 350 mm︱Distance table / spindle centre (horizontal pos.) 600 mm︱grinding motor 50 kW︱grinding wheel size 400 x 160 mm︱feed range (X /Y/ Z) 30 / 3 / 3 m/min︱min. input value 0,001 mm︱turning speed range 200 - 4000 U/min︱total power requirement 82 kVA︱weight of the machine ca. 16 t︱dimensions of the machine ca. 7,00 x 3,30 x 3,00 m︱
          Machine is sold as partially overhauled! MAEGERLE MGC Series are famous about various unique features: -Smooth slow and fast column motion and accurate positioning -Thermal stability by hydrostatic return oil circuit through machine base -Super precision -High stiffness and rigidity -Main spindle motor KESSLER 50kW. Our MGC is equipped with 180° swivel table diameter 1200 mm(FIBRO) and travelling column. The reason is to be able to make parts handling during the grinding operation. Accessories: Table dressing device, KNOLL HF 500/4000 water filtering unit with high pressure pump
            grinding length 1250 mm
            grinding width 350 mm
            workpiece height 450 mm
            CNC control Sinumerik 840D
            rotary table dia. 1200 mm
            Table dimensions 2 x (760 x 325) mm
            longitudinal stroke 800 mm
            vertical movement of grinding sl. 450 mm
            cross movement of grinding slide 350 mm
            Distance table / spindle centre . 600 mm
            grinding motor 50 kW
            grinding wheel size 400 x 160 mm
            feed range (X /Y/ Z) 30 / 3 / 3 m/min
            min. input value 0,001 mm
            turning speed range 200 - 4000 U/min
            total power requirement 82 kVA
            weight of the machine ca. 16 t
            dimensions of the machine ca. 7,00 x 3,30 x 3,00 m
            Description :
            Machine is sold as partially overhauled!
            MAEGERLE MGC Series are famous about various unique features:
            -Smooth slow and fast column motion and accurate positioning
            -Thermal stability by hydrostatic return oil circuit through machine base
            -Super precision
            -High stiffness and rigidity
            -Main spindle motor KESSLER 50kW.
            Our MGC is equipped with 180° swivel table diameter 1200 mm(FIBRO) and
            travelling column. The reason is to be able to make parts handling during the
            grinding operation.
            Accessories: Table dressing device, KNOLL HF 500/4000 water filtering unit with
            high pressure pump
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal JUNG C 740 CNC


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-40334 · Surface Grinding Machine - Horizontal

          JUNG - C 740 CNC - - 1996 - SIEMENS 840 C

          Technical details
          grinding length mm︱grinding width mm︱workpiece height mm︱-------------------------------------------------- ︱WORKING RANGE SURFACE GRINDING ︱- grinding length 700 mm︱- grinding width 400 mm︱- vertical travel 550 mm︱GRINDING TOOL ︱- type of grinding tool: wheel ︱- diameter (max) 400 mm︱- borehole: diameter 127 mm︱ELECTRICAL SPECIFICATIONS ︱- mains voltage 400 V︱- mains frequency 50 Hz︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 3000 mm︱- space requirements -front/back- 2300 mm︱- total height 1900 mm︱- total weight approx. 5200 kg︱
          Furnishing: - including dividing head - Magnetic plate 700x400mm - grinding wheel holders - grinding wheels - large vertical travel - few operating hours - Good condition Grinding cycles: - surface grinding - plunge grinding - forehead bows - plunge grinding - loop grinding Function video available on request
            - grinding length 700 mm
            - grinding width 400 mm
            - vertical travel 550 mm
            - type of grinding tool: wheel
            - diameter (max) 400 mm
            - borehole: diameter 127 mm
            - mains voltage 400 V
            - mains frequency 50 Hz
            - space requirements -left/right. 3000 mm
            - space requirements -front/back. 2300 mm
            - total height 1900 mm
            - total weight approx. 5200 kg
            Description :
            Furnishing:
            - including dividing head
            - Magnetic plate 700x400mm
            - grinding wheel holders
            - grinding wheels

            - large vertical travel
            - few operating hours
            - Good condition

            Grinding cycles:
            - surface grinding
            - plunge grinding
            - forehead bows
            - plunge grinding
            - loop grinding


            Function video available on request
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal FAVRETTO MA75


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-04763 · Surface Grinding Machine - Horizontal

          FAVRETTO - MA75 - - 1996 -

          Technical details
          width max. 60 mm︱ 300 mm︱ 127 mm︱ 1350 mm︱ 1.450 U/min︱ 850 mm︱ 300 mm︱ 750 mm︱ 0,001 mm︱ 0,001 mm︱ 0,01 - 0,05 mm︱spindle drive 7,5 kW︱ 0 - 5 m/min︱ 600 mm︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 3.900 x 2.200 x 2.500 m︱
            width max. 60 mm
            300 mm
            127 mm
            1
            350 mm
            1.450 U/min
            850 mm
            300 mm
            750 mm
            0,001 mm
            0,001 mm
            0,01 - 0,05 mm
            spindle drive 7,5 kW
            0 - 5 m/min
            600 mm
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 3.900 x 2.200 x 2.500 m
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal ZIERSCH & BALTRUSCH 800 CNC Quick


          • GWM GmbH
          • Gewerbestr. 2
          • 79639 Grenzach-Wyhlen
          • Deutschland

          • (0049) 7624 9082 0
            07624 9082-206
          • info@gromag.ch
            www.gromag.ch
          #1044-2990 · Surface Grinding Machine - Horizontal

          ZIERSCH & BALTRUSCH - 800 CNC Quick - - 1996 -

          Technical details
          grinding length 800 mm︱grinding width 300 mm︱workpiece height 300 mm︱table load capacity 800 kg︱grinding wheel dia. (unused wheel) 400 mm︱max. width of grinding wheel 50 mm︱CNC-control SINUMERIK 805 ︱voltage 380 V︱table-size 800x300 mm︱magnetic clamping plate 800x300 mm︱total power requirement 20 kVa︱weight of the machine ca. 5 t︱dimensions of the machine ca. 3,4x2,3x2,8 m︱coolant equipment ︱electric chuck
            grinding length 800 mm
            grinding width 300 mm
            workpiece height 300 mm
            table load capacity 800 kg
            grinding wheel dia. (unused whee. 400 mm
            max. width of grinding wheel 50 mm
            CNC-control SINUMERIK 805
            voltage 380 V
            table-size 800x300 mm
            magnetic clamping plate 800x300 mm
            total power requirement 20 kVa
            weight of the machine ca. 5 t
            dimensions of the machine ca. 3,4x2,3x2,8 m
            Description :


          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal BLOHM PLANOMAT 408


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-729568 · Surface Grinding Machine - Horizontal

          BLOHM - PLANOMAT 408 - - 1994 -

          Technical details
          grinding length 800 mm︱grinding width 400 mm︱workpiece height 500 mm︱total power requirement 15 kW︱weight of the machine ca. 4500 kg︱dimensions of the machine ca. m︱
          B L O H M (Germany) Precision Surface Grinding Machine with ERGOMATIC Cycle Control Model PLANOMAT 408 Year 1994 Serial No. 14 134 ___________________________________________________________ Grinding range 400 x 800 mm Working height under grinding wheel approx. 500 mm Grinding wheel Ø x width, approx. 400 x 80/100 mm Grinding wheel speeds fix 1.450 U/Min. Cross travel of grinding column, max. 360 mm Vertical travel of grinding head 550 mm Table stroke max. 900 mm Table speeds longitudinal 0,03 – 30 m/Min. Feed Rate of Y/Z - Axis 30 – 4.000 mm/Min. Min. Infeed of Grinding Slide vert. 0,001 mm/stroke Max. Workpiece weight approx. 800 kg Spindle drive, approx. 7,5 kW Total electrical load 13 kW - 400 V - 50 Hz Weight 4.500 kg Accessories / Special Features: * Cycle-Control System developed by BLOHM Company Model ERGOMATIC with monitor and SIEMENS Drives 611 for direct input of Grinding data for roughing/finishing and spark-out grinding process and for other cycles like plunge grinding for slots, steps, sides, etc. * The operating of this machine needs no special programming knowledge. * Automatic stop of vertical infeed and table movement into unloading position. * All axes provided with ball screw spindles and DC-Drives, but movements can be also controlled by using handwheels. * Automatic Grinding wheel straight dressing device mounted above the grinding wheel with automatic compensation. Dressing cycles can be implemented in grinding program/cycle. * Built-on Magnetic chuck approx. 400 x 800 x 90 mm, with adhesive force control and demagnetising device. * Large coolant supply device with bandfilter system, not fully closed working area but with with splash guards, etc. Condition : Good to very good, Machine can be inspected under power. Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.
            grinding length 800 mm
            grinding width 400 mm
            workpiece height 500 mm
            total power requirement 15 kW
            weight of the machine ca. 4500 kg
            Description :
            B L O H M (Germany)
            Precision Surface Grinding Machine with ERGOMATIC Cycle Control
            Model PLANOMAT 408
            Year 1994 Serial No. 14 134
            ___________________________________________________________

            Grinding range 400 x 800 mm
            Working height under grinding wheel approx. 500 mm
            Grinding wheel Ø x width, approx. 400 x 80/100 mm
            Grinding wheel speeds fix 1.450 U/Min.

            Cross travel of grinding column, max. 360 mm
            Vertical travel of grinding head 550 mm
            Table stroke max. 900 mm

            Table speeds longitudinal 0,03 – 30 m/Min.
            Feed Rate of Y/Z - Axis 30 – 4.000 mm/Min.
            Min. Infeed of Grinding Slide vert. 0,001 mm/stroke

            Max. Workpiece weight approx. 800 kg

            Spindle drive, approx. 7,5 kW
            Total electrical load 13 kW - 400 V - 50 Hz
            Weight 4.500 kg

            Accessories / Special Features:

            * Cycle-Control System developed by BLOHM Company Model ERGOMATIC with
            monitor and SIEMENS Drives 611 for direct input of Grinding data for
            roughing/finishing and spark-out grinding process and for other cycles
            like plunge grinding for slots, steps, sides, etc.
            * The operating of this machine needs no special programming knowledge.
            * Automatic stop of vertical infeed and table movement into unloading
            position.
            * All axes provided with ball screw spindles and DC-Drives, but movements can
            be also controlled by using handwheels.
            * Automatic Grinding wheel straight dressing device mounted above the
            grinding wheel with automatic compensation. Dressing cycles can be
            implemented in grinding program/cycle.
            * Built-on Magnetic chuck approx. 400 x 800 x 90 mm, with adhesive force
            control and demagnetising device.
            * Large coolant supply device with bandfilter system, not fully closed
            working area but with with splash guards, etc.


            Condition : Good to very good, Machine can be inspected under power.
            Delivery : Ex stock as inspected.
            Payment : Net, after conclusion of contract.

          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal GEIBEL + HOTZ FS 420 SA


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-40871 · Surface Grinding Machine - Horizontal

          GEIBEL + HOTZ - FS 420 SA - - 1993 -

          Technical details
          grinding length 400 mm︱grinding width 200 mm︱workpiece height mm︱-------------------------------------------------- ︱WORKING RANGE SURFACE GRINDING ︱- grinding length 400 mm︱- grinding width 200 mm︱
            grinding length 400 mm
            grinding width 200 mm
            workpiece height mm
            - grinding length 400 mm
            - grinding width 200 mm
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal JUNG JF520-1


          • Bema Werkzeugmaschinen
          • Hegelstr. 28
          • 73230 Kirchheim
          • Deutschland

          • +49 702171799
            +49 7021978711
          • bema@gebrauchtmaschine.de
            www.gebrauchtmaschine.de
          #1056-8083 · Surface Grinding Machine - Horizontal

          JUNG - JF520-1 - - 1992 -

          Technical details
          grinding length 500 mm︱grinding width 200 mm︱workpiece height mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          - Overhauled according to Jung acceptance report - Revarnished - New continiuosly adjustable grinding spindle motor with three-phase A.C. technology - New Wagner EP magnet with 4 mm with cross pole division - Angle stop side lengthwise - incl. 2 clamping claws - new WAGNER pole-reversal control unit - hydraulic dresser - 2-axis-digital display - New transverse spindle - Automatic cycle with roughing, finishing, spark-out, uplift
            grinding length 500 mm
            grinding width 200 mm
            Description :
            - Overhauled according to Jung acceptance report
            - Revarnished
            - New continiuosly adjustable grinding spindle motor with three-phase A.C.
            technology
            - New Wagner EP magnet with 4 mm with cross pole division
            - Angle stop side lengthwise
            - incl. 2 clamping claws
            - new WAGNER pole-reversal control unit
            - hydraulic dresser
            - 2-axis-digital display
            - New transverse spindle
            - Automatic cycle with roughing, finishing, spark-out, uplift

          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal JONES-SHIPMAN FORMAT 5/150


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-10015 · Surface Grinding Machine - Horizontal

          JONES-SHIPMAN - FORMAT 5/150 - - 1990 - OSAI Allen-Bradley 8600 V

          Technical details
          grinding length 450 mm︱grinding width 150 mm︱workpiece height 350 mm︱grinding spindle speed 2640 U/min︱grinding wheel size 200 x 20 x 31,75 mm︱table speed -stepless- 1 - 25 m/min︱vertical feeds: 0,06 - 3000 mm/Hub︱grinding wheel motor 1,5 kW︱control OSAI Allen-Bradley 8600 V ︱total power requirement kW︱weight of the machine ca. 1,5 t︱dimensions 1,5 x 1,4 x 2,02 m︱
          Accessories: permanent magnetic plate 450 x 150 mm, grinding wheel with flange, various flanges separat, balancing scale with mandrel, wheel trueing attachment, extraction, wet grinding attachment
            grinding length 450 mm
            grinding width 150 mm
            workpiece height 350 mm
            grinding spindle speed 2640 U/min
            grinding wheel size 200 x 20 x 31,75 mm
            table speed -stepless- 1 - 25 m/min
            vertical feeds: 0,06 - 3000 mm/Hub
            grinding wheel motor 1,5 kW
            control OSAI Allen-Bradley 8600 V
            weight of the machine ca. 1,5 t
            dimensions 1,5 x 1,4 x 2,02 m
            Description :
            Accessories: permanent magnetic plate 450 x 150 mm, grinding wheel
            with flange, various flanges separat, balancing scale with
            mandrel, wheel trueing attachment, extraction, wet grinding
            attachment
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine - Horizontal FAVRETTO MD 120


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80408 · Surface Grinding Machine - Horizontal

          FAVRETTO - MD 120 - - 1990 -

          Technical details
          grinding length 1200 mm︱grinding width 450 mm︱workpiece height 500 mm︱weight of the machine ca. 10 t︱dimensions of the machine ca. 4,8x2x3 m︱
            grinding length 1200 mm
            grinding width 450 mm
            workpiece height 500 mm
            weight of the machine ca. 10 t
            dimensions of the machine ca. 4,8x2x3 m
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   


          Find your next horizontal surface grinding machine online
          LagerMaschinen helps you find a horizontal surface grinding machine

          In the metalworking field a wide variety of equipment is necessary to ensure the highest quality products. A horizontal surface grinding machine crucial for producing precision pieces. The horizontal spindle of the grinding wheel is ideal for projects that require great attention to detail. The relatively small grinding surface—as compared to vertical grinding wheels—offer the operator a higher level precision. If you’re in the market for a horizontal surface grinding machine LagerMaschinen offers quality used machines at a fraction of the price of new ones.

          Used precision metalworking equipment at your fingertips

          Surface grinding is an abrasive process used to create smooth flat surfaces on metals and other materials. There are many surface grinders on the market and finding the right one to suit your needs may feel overwhelming. If you require a high level of precision and detail in your work a horizontal surface grinding machine may be the best choice for you. Most grinding machines nowadays are operated using Computer Numerical Control (CNC) although manually controlled versions are available. To get the equipment you need at a price you can afford try LagerMaschinen for a wide array of used machinery.

          Find used machinery quickly and easily LagerMaschinen

          You can keep your business running smoothly by investing in both reliable and affordable equipment. At LagerMaschinen you can search for equipment based on specific needs price or location making it an efficient and painless shopping experience. Buying used equipment such as a horizontal surface grinding machine online is an excellent option for those looking to get the most for their time and money.