,

Bitte einen Suchbegriff eingeben - Unesite pojam za pretraživanje
Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:

          angular infeed grinding machine

          Machinelist: angular infeed grinding machine


          angular infeed grinding machine

          used Grinding machines angular infeed grinding machine KARSTENS K 53 - 650


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-263191b · angular infeed grinding machine

          KARSTENS - K 53 - 650 - - 1995 -

          Technical details

          CNC-"Plunge-In" Cylindrical Grinder
            Description :
            CNC-"Plunge-In" Cylindrical Grinder


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • used Grinding machines angular infeed grinding machine KARSTENS K 53 - 650


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-263193b · angular infeed grinding machine

          KARSTENS - K 53 - 650 - - 1995 -

          Technical details

          K A R S T E N S (Germany) CNC Controlled Cylindrical Grinding Machine, Angular Plunge-Cut Type Model K 53-650 Serial No. 95021 Year 1995 Height of centres 180 mm Distance between centres 1,000 mm Grinding length, max. 650 mm Cylindrical grinding Ø, min./max., approx. 5 / 360 mm Max grinding width for plunge-cut process 150 mm Max. weight of workpiece, unsupported / between centres 70 / 250 kg Grinding wheel, Ø x width x bore 750 x 100 x 203 mm Cutting speeds, infinitely variable, max. 35 / 50 m/sec Grinding slide travel (X Axis) 360 mm Grinding slide feeds 0.01 - 6,000 mm/min Workpiece wheelhead speeds, infinitely variable 1 - 1,000 rpm Table speeds (Z Axis) 50 - 10,000 m/min Resolution of measuring system 0.0002 mm Spindle drive 15 kW Total electrical load 20 kW - 380 V - 50 Hz Weight 8,500 kg Accessories / Special Features * Granite base. * KARSTENS CNC Control, Model 089, with monitor. * MARPOSS Size Control, Model E5, with pneumatically driven measuring arm. * HOFFMANN Hydro Compensator, Model HK 5000, for automatic balancing of grinding wheel. * Grinding slide is set at an angle of 30°, with enlarged grinding wheel hood for grinding wheels with Ø up to 750 mm x width 150 mm. Grinding wheel is on the right-hand side. * Workpiece wheelhead is not swivelling. It can be adjusted on an air cushion on the table. * Tailstock quill is pulled back pneumatically. Tailstock has cylindricality correction and built-on diamond tool holder for CNC profiling, water cooled. Grinding spindle is cooled by coolant system. * Complete machine covers. Doors can be closed manually, with electric supervision. Foot switch for use of tailstock. * Central lubrication. * Pendant control panel, etc.
            Description :
            K A R S T E N S (Germany)
            CNC Controlled Cylindrical Grinding Machine, Angular Plunge-Cut Type
            Model K 53-650 Serial No. 95021 Year 1995

            Height of centres 180 mm
            Distance between centres 1,000 mm
            Grinding length, max. 650 mm

            Cylindrical grinding Ø, min./max., approx. 5 / 360 mm
            Max grinding width for plunge-cut process 150 mm
            Max. weight of workpiece, unsupported / between centres 70 / 250 kg

            Grinding wheel, Ø x width x bore 750 x 100 x 203 mm
            Cutting speeds, infinitely variable, max. 35 / 50 m/sec

            Grinding slide travel (X Axis) 360 mm
            Grinding slide feeds 0.01 - 6,000 mm/min

            Workpiece wheelhead speeds, infinitely variable 1 - 1,000 rpm

            Table speeds (Z Axis) 50 - 10,000 m/min
            Resolution of measuring system 0.0002 mm

            Spindle drive 15 kW
            Total electrical load 20 kW - 380 V - 50 Hz
            Weight 8,500 kg

            Accessories / Special Features
            * Granite base.
            * KARSTENS CNC Control, Model 089, with monitor.
            * MARPOSS Size Control, Model E5, with pneumatically driven measuring arm.
            * HOFFMANN Hydro Compensator, Model HK 5000, for automatic balancing of grinding wheel.
            * Grinding slide is set at an angle of 30°, with enlarged grinding wheel hood for grinding wheels with Ø up to 750 mm x width 150 mm. Grinding wheel is on the right-hand side.
            * Workpiece wheelhead is not swivelling. It can be adjusted on an air cushion on the table.
            * Tailstock quill is pulled back pneumatically. Tailstock has cylindricality correction and built-on diamond tool holder for CNC profiling, water cooled. Grinding spindle is cooled by coolant system.
            * Complete machine covers. Doors can be closed manually, with electric supervision. Foot switch for use of tailstock. * Central lubrication. * Pendant control panel, etc.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • used Grinding machines angular infeed grinding machine KARSTENS K 58-1 SL 1000


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-219518b · angular infeed grinding machine

          KARSTENS - K 58-1 SL 1000 - - 1997 -

          Technical details

          Height of centres 181 mm Distance between centres 1,000 mm Grinding length, max. 1,000 mm Cylindrical grinding Ø, min./max., approx. 5 / 360 mm Grinding wheel, Ø x width x bore 600 x 220 x 203 mm Cutting speed, max. 50 m/sec Grinding slide travel (X Axis) 360 mm Grinding slide feeds 0.01 - 10,000 mm/min Grinding slide swivelling (B Axis) 270 ° Workpiece wheelhead speeds, infinitely variable 30 - 1,000 rpm Workpiece wheelhead swivelling 0 - 90 ° Table speeds (Z Axis) 50 - 10,000 m/min Table swivelling 8.5 and 6 ° Spindle drive 2 x 14 kW Total electrical load 35 kW - 380 V - 50 Hz Weight 10,000 kg Accessories / Special Features Machine is set up for grinding transmission shafts, each with 3 grinding seats, ground on both sides, with a diameter range of approx. 60 - 80 mm. Grinding process is as follows: The pre-turned parts are placed in prisms on a rotary conveyor belt. The portal loading device grips the workpiece and brings it into the working area. The finished workpiece is measured on the way back and if satisfactory it is placed on the rotary conveyor. When the workpiece is between centres, a extra wide grinding wheel grinds one side of workpiece. Then the other side of the workpiece is ground (different parameter) by turning the complete grinding slide (B Axis) 180°, so that the other grinding spindle with a different profile is in operation. The grinding process is supervised by a MARPOSS Diameter Control and a workpiece positioning control. Machine is equipped with a KARSTENS CNC Control with monitor; separate dressing device, built on the table; cool oil centrifuge; complete covers for the working area; various grinding wheel flanges, etc. (measuring station for a specific workpiece is not available).
            Description :
            Height of centres 181 mm
            Distance between centres 1,000 mm
            Grinding length, max. 1,000 mm

            Cylindrical grinding Ø, min./max., approx. 5 / 360 mm

            Grinding wheel, Ø x width x bore 600 x 220 x 203 mm
            Cutting speed, max. 50 m/sec

            Grinding slide travel (X Axis) 360 mm
            Grinding slide feeds 0.01 - 10,000 mm/min
            Grinding slide swivelling (B Axis) 270 °

            Workpiece wheelhead speeds, infinitely variable 30 - 1,000 rpm
            Workpiece wheelhead swivelling 0 - 90 °

            Table speeds (Z Axis) 50 - 10,000 m/min
            Table swivelling 8.5 and 6 °

            Spindle drive 2 x 14 kW
            Total electrical load 35 kW - 380 V - 50 Hz
            Weight 10,000 kg

            Accessories / Special Features
            Machine is set up for grinding transmission shafts, each with 3 grinding seats, ground on both sides, with a diameter range of approx. 60 - 80 mm. Grinding process is as follows:
            The pre-turned parts are placed in prisms on a rotary conveyor belt. The portal loading device grips the workpiece and brings it into the working area. The finished workpiece is measured on the way back and if satisfactory it is placed on the rotary conveyor.
            When the workpiece is between centres, a extra wide grinding wheel grinds one side of workpiece. Then the other side of the workpiece is ground (different parameter) by turning the complete grinding slide (B Axis) 180°, so that the other grinding spindle with a different profile is in operation. The grinding process is supervised by a MARPOSS Diameter Control and a workpiece positioning control.
            Machine is equipped with a KARSTENS CNC Control with monitor; separate dressing device, built on the table; cool oil centrifuge; complete covers for the working area; various grinding wheel flanges, etc. (measuring station for a specific workpiece is not available).


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • used Grinding machines angular infeed grinding machine SCHAUDT B 501 S 750


          • Kleinlein Johann GmbH&Co.KG
          • Elisenstraße 4
          • 90441 Nürnberg
          • Deutschland

          • +49 911628110
            +49 9116281155
          • info@kleinlein.de
            www.kleinlein.de
          #1005-11746 · angular infeed grinding machine

          SCHAUDT - B 501 S 750 - - 1983 -

          Technical details

          Schrägeinstichmaschine ohne Tischbewegung, mit hydr. Reitstock Profilabrichtgerät Gr.4 für 30Grad Schrägeinstich auf dem Schleifspindelstock montiert, mit elektrischer Steuerung für den Längsschlittenantrieb, max. Abrichtbreite 200mm, 2 Abrichtgeschwindigkeiten. Filterpapieranlage PFA 150 SEITZ, Filterpapierbreite 710mm,Schleifscheiben- auswuchteinrichtung HOFMANN HYDROKOMPENSER
            Description :
            Schrägeinstichmaschine ohne Tischbewegung, mit hydr. Reitstock Profilabrichtgerät Gr.4 für 30Grad Schrägeinstich auf dem Schleifspindelstock montiert, mit elektrischer Steuerung für den Längsschlittenantrieb, max. Abrichtbreite 200mm, 2 Abrichtgeschwindigkeiten. Filterpapieranlage PFA 150 SEITZ, Filterpapierbreite 710mm,Schleifscheiben- auswuchteinrichtung HOFMANN HYDROKOMPENSER


        • Kleinlein Johann GmbH&Co.KG
        • Elisenstraße 4
        • 90441 Nürnberg
        • Deutschland

        • used Grinding machines angular infeed grinding machine TSCHUDIN HTG 440


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-10160 · angular infeed grinding machine

          TSCHUDIN - HTG 440 - - 1974 -

          Technical details

          Accessories: grinding wheel with flange, 5 grinding wheels, wheel trueing attachment, wet grinding attachment
            Description :
            Accessories: grinding wheel with flange, 5 grinding wheels, wheel trueing
            attachment, wet grinding attachment


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

          •   
          •   
          • 1  

          TOP Manufacturer: