,

Bitte einen Suchbegriff eingeben - Unesite pojam za pretraživanje
Kategorija:
    Proizvođač:
      strojevi:
        Trgovac:

          Sheet Metal Deburring Machine

          Machinelist: Sheet Metal Deburring Machine


          Sheet Metal Deburring Machine

          used Sheet metal working / shaeres / bending Sheet Metal Deburring Machine GECAM G 65 RX


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-71 · Sheet Metal Deburring Machine

          GECAM - G 65 RX - - 2024 -

          Technical details
          neu20245551Mai 2024, ZwischenverkaufItalien57500 €︱ 1155.75 €︱ 1650 mm︱ 0,5 - 170 mm︱ 670 x 2200 mm︱ 4000 m³/h︱ 120 mm︱ 6 bar︱ 78 (+/-2) dB︱ 1045 mm︱ 1735 mm︱ 2090 mm︱ 930 kg︱
          WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table INCL. OPTIONALTAMPICO BRUSH SYSTEM FOR CONVEYOR BELT CLEANING Ø 150 MM 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 125 Hardness of the rubber wheels Shore 55 Stroke of the contact roller adjustment up-down "Grain adjustment mm 8 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Positioning speed of the contact roller adjustment m/sek 10 Grinding belt speed m/sek 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 8 Oscillation stroke mm 15 Rotation motor power kW 2,2 Revs 1/min 1000 Oscillation motor power kW 0,4 Grinding brush speed m/sec 10,0 Optional accessories (time of delivery on request): B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5150,00 with Wire Brush 0,3 mm € 6060,00 R GROUP - GRINDING BELT Motor 11 kW € 740,00 X GROUP - CUP BRUSHES Motor with variable speed 5,5 kW 350/1100 € 2130,00 OPTIONS: Return to Sender System (Grinding part is discharged to the front again) € 1770,00 Conveyor belt with vacuum system - 3,0 kW € 5150,00 Additional PVC coated rollers on infeed and outfeed side € 1510,00 Air pressure system for cleaning the conveyor belt € 1290,00 Tampico Brush System for parts cleaning 0,55kW Ø 150 mm € 4670,00 Tampico Brush system for conveyor belt cleaning Ø 150 mm € 3200,00 magnetic conveying system - 2 groups, 200 x 200 mm € 12020,00 Demagnetiser € 4.940,00 THE MACHINE MUST BE USED WITH AN EXTRACTION DEVICE. WE RECOMMEND AN EXTRACTION SYSTEM WITH 4,000 M³/H.
            neu
            2024
            5551
            Mai 2024, Zwischenverkauf
            Italien
            57500 €
            1155.75 €
            1
            650 mm
            0,5 - 170 mm
            670 x 2200 mm
            4000 m³/h
            120 mm
            6 bar
            78 (+/-2) dB
            1045 mm
            1735 mm
            2090 mm
            930 kg
            Description :
            WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP
            Machine made of stress-free welded steel construction for stable and rigid structure.
            Work table with motorised height adjustment via 4 synchronised spindles.
            Independent drive motors for each work group.
            Hoods for extraction inside the machine, one per station.
            Touch screen for
            -Automatic star-delta connection of the main motors
            - Analogue ammeter for each group
            - Digital display for sheet thickness with decimal point tolerance
            - Material thickness adjustment (+/- 0.1 mm)
            - Machine condition monitoring with alarm messages

            FEEDING SYSTEM

            Robust steel structure, wear-resistant surface.
            Vacuum conveyor belt on request
            Variable feed speed via frequency converter 0.6 to 6.5 m/min.
            Rubber conveyor belt, oil and temperature resistant
            Automatic conveyor belt centring
            Lateral guides to prevent the belt from lifting off.
            Rubber pressure rollers in front and behind each station, oil and temperature resistant
            Idle rollers at the front and rear table
            INCL. OPTIONALTAMPICO BRUSH SYSTEM FOR CONVEYOR BELT CLEANING Ø 150 MM

            1 . WORKING GROUP - R

            Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating
            Adjustable via eccentric shaft for working position and compensation of abrasive belt wear
            Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop.
            Abrasive belts and/or Scotch Brite can be used.
            Motorised adjustment and electronic control of contact roll height.
            Variable speed motor with automatic brake in case of emergency.
            Pneumatic tensioning system for the abrasive belt.
            Sanding belt centring system, with electronic photocell.
            Oscillation adjustment in width and time.

            Diameter of contact roller
            mm
            125

            Hardness of the rubber wheels
            Shore
            55

            Stroke of the contact roller adjustment up-down "Grain adjustment
            mm
            8

            Positioning accuracy of the contact roller adjustment
            mm
            +/- 0,02

            Positioning speed of the contact roller adjustment
            m/sek
            10

            Grinding belt speed
            m/sek
            3-18

            Motor power
            kW
            7,5

            2. WORKING GROUP - X
            2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise.
            Transverse movement of the entire group (oscillating)
            Quick change holder for brushes

            Brush diameter
            mm
            115

            Number of brushes
            No
            8

            Oscillation stroke
            mm
            15

            Rotation motor power
            kW
            2,2

            Revs
            1/min
            1000

            Oscillation motor power
            kW
            0,4

            Grinding brush speed
            m/sec
            10,0

            Optional accessories (time of delivery on request):

            B Group - External barrel brush Ø 150 mm

            with Scotch Brite Brush

            5150,00

            with Wire Brush 0,3 mm

            6060,00

            R GROUP - GRINDING BELT

            Motor 11 kW

            740,00

            X GROUP - CUP BRUSHES

            Motor with variable speed 5,5 kW 350/1100

            2130,00

            OPTIONS:

            Return to Sender System (Grinding part is discharged to the front again)

            1770,00

            Conveyor belt with vacuum system - 3,0 kW

            5150,00

            Additional PVC coated rollers on infeed and outfeed side

            1510,00

            Air pressure system for cleaning the conveyor belt

            1290,00

            Tampico Brush System for parts cleaning 0,55kW Ø 150 mm

            4670,00

            Tampico Brush system for conveyor belt cleaning Ø 150 mm

            3200,00

            magnetic conveying system - 2 groups, 200 x 200 mm

            12020,00

            Demagnetiser

            4.940,00

            THE MACHINE MUST BE USED WITH AN EXTRACTION DEVICE. WE RECOMMEND AN EXTRACTION SYSTEM WITH 4,000 M³/H.


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Sheet Metal Deburring Machine GECAM Easy T


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-525 · Sheet Metal Deburring Machine

          GECAM - Easy T - - 2023 -

          Technical details
          neu20235542prompt, Zwischenverkauf vItalien13600 €︱ 278.8 €︱ 11300 mm︱ 150 mm︱ 150 mm︱ 250x350 mm︱ 945 mm︱ 0.75 kW︱ 1400 mm︱ 1000 mm︱ 1450 mm︱ 300 kg︱
          Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum. The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm. The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° and enables a quick change of the grinding tool. Properties: * The grinding pressure is applied manually. * When deburring from above, the workpieces are pressed onto the high-grip lid. * Fast processing, low costs The brush ensures the rounding of the edges of the workpiece. The standard brushes have a diameter of 150 mm. To deburr the product, use a support pad with a grinding disc. Depending on the height and hardness of the burr, you can set the grinding wheel at a slight angle to allow more pressure on the burr.
            neu
            2023
            5542
            prompt, Zwischenverkauf v
            Italien
            13600 €
            278.8 €
            1
            1300 mm
            150 mm
            150 mm
            250x350 mm
            945 mm
            0.75 kW
            1400 mm
            1000 mm
            1450 mm
            300 kg
            Description :
            Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum.
            The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm.

            The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° and enables a quick change of the grinding tool.

            Properties:

            * The grinding pressure is applied manually.
            * When deburring from above, the workpieces are pressed onto the high-grip lid.
            * Fast processing, low costs

            The brush ensures the rounding of the edges of the workpiece. The standard brushes have a diameter of 150 mm. To deburr the product, use a support pad with a grinding disc. Depending on the height and hardness of the burr, you can set the grinding wheel at a slight angle to allow more pressure on the burr.


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Sheet Metal Deburring Machine ERNST EM5N II + 2F


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S3600 · Sheet Metal Deburring Machine

          ERNST - EM5N II + 2F - - 2008 -

          Technical details
          working width / mm︱workpiece height / mm︱ /
          Workpiece thickness: 1-70 mm Min. workpiece length: 350 mm Min. workpiece length with magnetic or vacuum track: 80 mm Band filter unit volume Ab=900 approx. 350 l Band filter unit volume Ab=1400 approx. 400 l Working height constant 1000 mm Feed speed 2/4 m/min Feed speed stepless 1.5-8 m/min Operating voltage 400 VAC Control voltage 24 V DC, 230 VAC Frequency 50Hz Compressed air connection R 3/8" Minimum compressed air pressure 5 bar Minimum compressed air volume EMSN II +2F 10 NI/min Minimum compressed air quantity EMSN II /L +2F 80 NI/min Overall electrical connection See installation plan Weight of the machine working width 900 mm approx. 4200 kg Weight of the machine working width 1400 mm approx. 5100 kg Weight of the machine working width 1540 mm approx. 5600 kg Sandpaper dimensions sanding roller AB=900 1540 mm long x 900 mm wide Sandpaper dimensions sanding roller AB=1400 1540 mm long x 1400 mm wide Sandpaper dimensions sanding roller AB=1540 1540 mm long x 1540 mm wide SERIOUS Automatic sheet metal deburring machine with wet grinding device Type EM 5 N/II/L + 2 F 1400 Year of construction 2008 Factory - No. 780063 Machine/Equipment: Sheet metal deburring machine using the wet ship process for stamping, laser and nipple parts of different materials with flexible grinding roller, as well as 2 flap brushes for particularly high edge rounding and 2 Spring steel brushes for oxide removal (worn out) The machine is equipped with a continuous conveyor belt for the Workpiece transport equipped. Effective working width: 1380mm Minimum workpiece length: 350mm Special equipment: •Vacuum suction system 300mm wide, for non-magnetic small parts Minimum length of 80mm, with a minimum area of ??200cm² •Magnet track 300mm wide Minimum length of 80mm, with a minimum area of ??40cm² •Frequency converter for stepless feed & speed regulation •various Abrasives as accessories
            working width / mm
            workpiece height / mm
            /
            Description :
            Workpiece thickness: 1-70 mm
            Min. workpiece length: 350 mm
            Min. workpiece length with magnetic or vacuum track: 80 mm
            Band filter unit volume Ab=900 approx. 350 l
            Band filter unit volume Ab=1400 approx. 400 l
            Working height constant 1000 mm
            Feed speed 2/4 m/min
            Feed speed stepless 1.5-8 m/min
            Operating voltage 400 VAC
            Control voltage 24 V DC, 230 VAC
            Frequency 50Hz
            Compressed air connection R 3/8"
            Minimum compressed air pressure 5 bar
            Minimum compressed air volume EMSN II +2F 10 NI/min
            Minimum compressed air quantity EMSN II /L +2F 80 NI/min
            Overall electrical connection See installation plan
            Weight of the machine working width 900 mm approx. 4200 kg
            Weight of the machine working width 1400 mm approx. 5100 kg
            Weight of the machine working width 1540 mm approx. 5600 kg
            Sandpaper dimensions sanding roller AB=900 1540 mm long x 900 mm wide
            Sandpaper dimensions sanding roller AB=1400 1540 mm long x 1400 mm wide
            Sandpaper dimensions sanding roller AB=1540 1540 mm long x 1540 mm wide


            SERIOUS
            Automatic sheet metal deburring machine with wet grinding device
            Type EM 5 N/II/L + 2 F 1400
            Year of construction 2008 Factory - No. 780063

            Machine/Equipment:
            Sheet metal deburring machine using the wet ship process
            for stamping, laser and nipple parts of different materials with flexible
            grinding roller,
            as well as 2 flap brushes for particularly high edge rounding and 2
            Spring steel brushes for oxide removal (worn out)

            The machine is equipped with a continuous conveyor belt for the
            Workpiece transport equipped.
            Effective working width: 1380mm
            Minimum workpiece length: 350mm

            Special equipment:
            •Vacuum suction system 300mm wide, for non-magnetic small parts
            Minimum length of 80mm, with a minimum area of ??200cm²
            •Magnet track 300mm wide
            Minimum length of 80mm, with a minimum area of ??40cm²
            •Frequency converter for stepless feed & speed regulation
            •various Abrasives as accessories


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Sheet Metal Deburring Machine ERNST EM 5 N/II/L + 2 B/1400


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-673954 · Sheet Metal Deburring Machine

          ERNST - EM 5 N/II/L + 2 B/1400 - - 2007 -

          Technical details
          working width 1380 mm︱workpiece height 70 mm︱ ︱total power requirement 45 kW︱weight of the machine ca. 5.500 kg︱dimensions of the machine ca. m︱
            working width 1380 mm
            workpiece height 70 mm
            total power requirement 45 kW
            weight of the machine ca. 5.500 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Sheet Metal Deburring Machine GECAM G 135 RB8


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1938 · Sheet Metal Deburring Machine

          GECAM - G 135 RB8 - - -

          Technical details
          neuca. 12 Wochen ab AuftragsItalien127200 €︱ 2531.28 €︱ 1350 mm︱ 0,4 - 120 mm︱ 1370 x 2200 mm︱ 6000 m³/h︱ 150 mm︱ 6 bar︱ 4200 mm︱ 2300 mm︱ 2350 mm︱ 4200 kg︱
          WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP * Machine made of stress-free welded steel construction for stable and rigid structure * Work table with motorised height adjustment via 4 synchronised spindles. * Independent drive motors for each work group. * Hoods for extraction inside the machine, one per station. Touch screen for: * Automatic star-delta connection of the main motors * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine condition monitoring with alarm messages FEEDING SYSTEM * Robust steel structure, wear-resistant surface. * Vacuum conveyor belt on request * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW. * Maximum permissible weight on the table: 140 kg. * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min. * Rubber conveyor belt, oil and temperature resistant. * Lateral guides to prevent the belt from lifting off. * Rubber pressure rollers in front and behind each station, oil and temperature resistant. * Automatic centring device for the conveyor belt * Automatic servo cooled motor * Speed motor on the main touch screen 1 TH R GROUP DEBURRING WITH ABRASIVE BELT * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite. * Pneumatic on-off switch. * Roller adjustment up-down "grain" stroke 10 mm * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotation speed in feed direction 4 - 18 m/s. * Width and duration of the oscillation setting. * Pneumatic tensioning system for the abrasive belt. * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time. 2ND GROUP ROTATING BRUSH UNIT * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and a length of 530 mm. * Motorised raising and lowering of the group to regulate the pressure of the deburring. * Variable speed motor 1,5 kW. * Variable speed group electronic inverter 6 - 12 U/min. * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min. * Speed programmable control and display on the electronic touch screen. CONTROL OF THE THICKNESS AND THE BRUSHES * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings * Maximum operating pressure 120 mm * Pressure motor power kW 0,75 * Pressure adjustment via touchscreen CONVEYOR BELT CLEANING Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under the table, with a motor power of 0.12 kW. The brush rotates against the rotation of the conveyor belt and removes the dust remaining on the belt and in the holes of the vacuum system. It is very important to keep the holes clean to maintain the maximum capacity of the vacuum. VACUUM SYSTEM * Perforated and slotted conveyor belt and table * Vacuum fan motor inside the machine, Power 4,0 kW * Automatic start of the time lapse * Double inlet pipework (left and right) of the table * Sound insulation system for vacuum blowers through special low-noise material and silencers ELECTRONIC CONTROL * Electronic ControlPLC-Touchscreen 10" * Automatic start of the sequence programme * Control of layer thickness * Software-Help * Feed control * Speed monitoring * Automatic alarm notification and reset THE MACHINE MUST BE USED WITH AN EXTRACTION DEVICE. WE RECOMMEND AN EXTRACTION SYSTEM WITH 6,000 M³/H. OPTION: Service-Remote-Device € 1.380,--
            neu
            ca. 12 Wochen ab Auftrags
            Italien
            127200 €
            2531.28 €
            1350 mm
            0,4 - 120 mm
            1370 x 2200 mm
            6000 m³/h
            150 mm
            6 bar
            4200 mm
            2300 mm
            2350 mm
            4200 kg
            Description :
            WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP

            * Machine made of stress-free welded steel construction for stable and rigid structure
            * Work table with motorised height adjustment via 4 synchronised spindles.
            * Independent drive motors for each work group.
            * Hoods for extraction inside the machine, one per station.

            Touch screen for:

            * Automatic star-delta connection of the main motors
            * Digital display for sheet thickness with decimal point tolerance
            * Material thickness adjustment (+/- 0.1 mm)
            * Machine condition monitoring with alarm messages

            FEEDING SYSTEM

            * Robust steel structure, wear-resistant surface.
            * Vacuum conveyor belt on request
            * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW.
            * Maximum permissible weight on the table: 140 kg.
            * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min.
            * Rubber conveyor belt, oil and temperature resistant.
            * Lateral guides to prevent the belt from lifting off.
            * Rubber pressure rollers in front and behind each station, oil and temperature resistant.
            * Automatic centring device for the conveyor belt
            * Automatic servo cooled motor
            * Speed motor on the main touch screen

            1 TH R GROUP DEBURRING WITH ABRASIVE BELT

            * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite.
            * Pneumatic on-off switch.
            * Roller adjustment up-down "grain" stroke 10 mm
            * Variable speed motor 11 kW with automatic braking in case of emergency.
            * Rotation speed in feed direction 4 - 18 m/s.
            * Width and duration of the oscillation setting.
            * Pneumatic tensioning system for the abrasive belt.
            * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time.

            2ND GROUP ROTATING BRUSH UNIT

            * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise.
            * Each brush has a diameter of 350 mm and a length of 530 mm.
            * Motorised raising and lowering of the group to regulate the pressure of the deburring.
            * Variable speed motor 1,5 kW.
            * Variable speed group electronic inverter 6 - 12 U/min.
            * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min.
            * Speed programmable control and display on the electronic touch screen.

            CONTROL OF THE THICKNESS AND THE BRUSHES

            * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings
            * Maximum operating pressure 120 mm
            * Pressure motor power kW 0,75
            * Pressure adjustment via touchscreen

            CONVEYOR BELT CLEANING
            Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under the table, with a motor power of 0.12 kW. The brush rotates against the rotation of the conveyor belt and removes the dust remaining on the belt and in the holes of the vacuum system. It is very important to keep the holes clean to maintain the maximum capacity of the vacuum.

            VACUUM SYSTEM

            * Perforated and slotted conveyor belt and table
            * Vacuum fan motor inside the machine, Power 4,0 kW
            * Automatic start of the time lapse
            * Double inlet pipework (left and right) of the table
            * Sound insulation system for vacuum blowers through special low-noise material and silencers

            ELECTRONIC CONTROL

            * Electronic ControlPLC-Touchscreen 10"
            * Automatic start of the sequence programme
            * Control of layer thickness
            * Software-Help
            * Feed control
            * Speed monitoring
            * Automatic alarm notification and reset

            THE MACHINE MUST BE USED WITH AN EXTRACTION DEVICE. WE RECOMMEND AN EXTRACTION SYSTEM WITH 6,000 M³/H.

            OPTION:
            Service-Remote-Device € 1.380,--


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Sheet Metal Deburring Machine GECAM G 135 RX


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1762 · Sheet Metal Deburring Machine

          GECAM - G 135 RX - - -

          Technical details
          neuca. 12 - 14 Wochen ab AufItalien73800 €︱ 1483.38 €︱ 1350 mm︱ 0,5 - 170 mm︱ 1370 x 2200 mm︱ 4000 m³/h︱ 200 mm︱ 6 bar︱ 78 (+/-2) dB︱ 1750 mm︱ 2100 mm︱ 2180 mm︱ 2000 kg︱
          WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Bonnets for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 180 Hardness of the rubber wheels Shore 55 Stroke of the contact roller adjustment up-down "Grain adjustment mm 8 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Positioning speed of the contact roller adjustment m/s 10 Grinding belt speed m/s 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 10rotating clockwise and 10counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 20 Oscillation stroke mm 15 Rotation motor power kW 5,5 Revs 1/min 1000 Oscillation motor power kW 0,37 Grinding brush speed m/s 10,0 ACCESSORIES: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5.580,00 with Wire Brush 0,3 mm € 5.900,00 R GROUP - GRINDING BELT Motor 15 kW € 1.060,00 Motor with 2 speeds 9 - 11 kW € 1.830,00 Motor with 2 speeds 12 - 15 kW € 2.360,00 X GROUP - CUP BRUSHES Motor with variable speed 5,5 kW 350/1100 € 4.190,00 OPTIONS: Return to Sender System (Grinding part is discharged to the front again) € 1.290,00 Conveyor belt with vacuum system - 3,0 kW - 300 mm wide € 4.780,00 2 additional PVC coated rollers on infeed and outfeed side € 2.040,00 Tampico Brush System for parts cleaning 0,55kW Ø 150 mm € 4.510,00 Tampico Brush system for conveyor belt cleaning Ø 150 mm € 4.030,00 magnetic conveying system - 2 groups, 200 x 200 mm € 13.520,00 Demagnetiser € 4.940,00 THE MACHINE MUST BE USED WITH AN EXTRACTION DEVICE. WE RECOMMEND AN EXTRACTION SYSTEM WITH 4,000 M³/H.
            neu
            ca. 12 - 14 Wochen ab Auf
            Italien
            73800 €
            1483.38 €
            1350 mm
            0,5 - 170 mm
            1370 x 2200 mm
            4000 m³/h
            200 mm
            6 bar
            78 (+/-2) dB
            1750 mm
            2100 mm
            2180 mm
            2000 kg
            Description :
            WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP
            Machine made of stress-free welded steel construction for stable and rigid structure.
            Work table with motorised height adjustment via 4 synchronised spindles.
            Independent drive motors for each work group.
            Bonnets for extraction inside the machine, one per station.
            Touch screen for
            -Automatic star-delta connection of the main motors
            - Analogue ammeter for each group
            - Digital display for sheet thickness with decimal point tolerance
            - Material thickness adjustment (+/- 0.1 mm)
            - Machine condition monitoring with alarm messages

            FEEDING SYSTEM

            Robust steel structure, wear-resistant surface.
            Vacuum conveyor belt on request
            Variable feed speed via frequency converter 0.6 to 6.5 m/min.
            Rubber conveyor belt, oil and temperature resistant
            Automatic conveyor belt centring
            Lateral guides to prevent the belt from lifting off.
            Rubber pressure rollers in front and behind each station, oil and temperature resistant
            Idle rollers at the front and rear table

            1 . WORKING GROUP - R

            Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating
            Adjustable via eccentric shaft for working position and compensation of abrasive belt wear
            Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop.
            Abrasive belts and/or Scotch Brite can be used.
            Motorised adjustment and electronic control of contact roll height.
            Variable speed motor with automatic brake in case of emergency.
            Pneumatic tensioning system for the abrasive belt.
            Sanding belt centring system, with electronic photocell.
            Oscillation adjustment in width and time.

            Diameter of contact roller
            mm
            180

            Hardness of the rubber wheels
            Shore
            55

            Stroke of the contact roller adjustment up-down "Grain adjustment
            mm
            8

            Positioning accuracy of the contact roller adjustment
            mm
            +/- 0,02

            Positioning speed of the contact roller adjustment
            m/s
            10

            Grinding belt speed
            m/s
            3-18

            Motor power
            kW
            7,5

            2. WORKING GROUP - X
            2 rows of vertical brushes, 10rotating clockwise and 10counterclockwise.
            Transverse movement of the entire group (oscillating)
            Quick change holder for brushes

            Brush diameter
            mm
            115

            Number of brushes
            No
            20

            Oscillation stroke
            mm
            15

            Rotation motor power
            kW
            5,5

            Revs
            1/min
            1000

            Oscillation motor power
            kW
            0,37

            Grinding brush speed
            m/s
            10,0

            ACCESSORIES:

            B Group - External barrel brush Ø 150 mm

            with Scotch Brite Brush

            5.580,00

            with Wire Brush 0,3 mm

            5.900,00

            R GROUP - GRINDING BELT

            Motor 15 kW

            1.060,00

            Motor with 2 speeds 9 - 11 kW

            1.830,00

            Motor with 2 speeds 12 - 15 kW

            2.360,00

            X GROUP - CUP BRUSHES

            Motor with variable speed 5,5 kW 350/1100

            4.190,00

            OPTIONS:

            Return to Sender System (Grinding part is discharged to the front again)

            1.290,00

            Conveyor belt with vacuum system - 3,0 kW - 300 mm wide

            4.780,00

            2 additional PVC coated rollers on infeed and outfeed side

            2.040,00

            Tampico Brush System for parts cleaning 0,55kW Ø 150 mm

            4.510,00

            Tampico Brush system for conveyor belt cleaning Ø 150 mm

            4.030,00

            magnetic conveying system - 2 groups, 200 x 200 mm

            13.520,00

            Demagnetiser

            4.940,00

            THE MACHINE MUST BE USED WITH AN EXTRACTION DEVICE. WE RECOMMEND AN EXTRACTION SYSTEM WITH 4,000 M³/H.


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          GECAM - ERNST -