Single bull block

---

HORIZONTAL BULLBLOCK Constr.: BREITENBACH Type: EH 14 year: approx. 1970 condition: good drawing force: approx. 14 to. working range: up to approx. 24 mm Ø drawing speed: 30/47/72 m/min. drawing drum-Ø: 800 mm, watercooled drawing speeds: 3 drive: 90 kW, 1.480 rpm, 380 V, 50 Hz Scope of delivery: - drawing machine with drawing die holder and pre-straightener - draw-in clamp - holding down roll with hydraulic station - main motor - coiler - electrical cabinet - transformer weight: approx. 11,5 to.

---

---

HORIZONTAL BULL-BLOCK Constr.: GERHARDI Drawing force: 7 to. Year of construction: 1960/1989 The machine has three changeable drawing drums. 1. drawing drum Ø 600 mm 2. drawing drum Ø 800 mm 3. drawing drum Ø 1000 mm Drive motor: 1. 380V, 50Hz, 45/35kW, 1450/730U/min 2. 380V, 50Hz, 15kW, 750U/min The machine consits of: - horizontal bull-block - electrical cabinet with Siemens S5 PLC Total weight: approx. 8 to.

---

VERTICAL BULLBLOCK constr. Herborn type EG IV year approx. 1970 drawing force 3 to. drawing drum-Ø 600 mm drive motor 735 / 1470 rpm, 34 / 50 HP (25 / 37 kW), 380 V, 50 cycles Gear box With: Lifting cage, separate electrical cabinet weight approx. 3.500 kg

---

VERTICAL SINGLE DRAWING BLOCK constr. Klemm + Fischer type E 600/1 year 1986 working range stainless steel 3 - 1,6 mm Ø drawing force max. 1,5 to. drawing drum-Ø 600 mm drawing die 43 x 27 (3°) drawing speed 1,5 m/sec. straightening apparatus DS 7-25 cooling of drawing die water, indirect drive motor 18,5 kW, 380 V, 50 Hz, 1460 rpm weight ca. 1 900 kg with one drawing drum as spare part

---

Horizontal Bullblock, complete drawing line Manufacturer: Made in Europe Type: Bullblock 16 to. line New in: Revamped 2012 Working range: Inlet wire Ø: min. 8 mm, max. 25 mm Outlet wire Ø: min. 7 mm, max. 20 mm MPa 8 - 25 mm 800 MPa, reduction: 38% 8 - 15 mm 1200 MPa, reduction: 25% Drawing pull: 16 ton Drum: Ø 600 mm x 700 wide Max. coil weight: 1000 kg Speed: 0,40 - 2,90 m/sec Main motor: AC 100 kW, 1.480 Rpm, 220/380 V The line consists of: =============== - Loading Manipulator - Multi Pay-off - Milling pointing machine - Prestraightener - Horizontal Bullblock - Discharge Coiler - Electrics - Hydraulic A detailed description, with more photos, layout plan are available upon request.

---

Horizontal - Bullblock Manufacturer: Malmedie & CO. (Dusseldorf) Type: EH 20U Year: 1972 (rebuilt on 1997) Drum: Ø775 mm x 600 m Range: Ø max. 32 mm Pull Force: 20 to Speed:0,3 m/sec, 0,6 m/sec, 0,9 m/secn Main Motor: AC 75 kW- 980 rpm - 220/380 V WITHOUT ELECTRICAL CABINET, WITHOUT FINISH COILER Weight: about 15ton

---